Items in Article
By Shea Comfort
At the crusher:
-
SO2: Use 50 ppm (1.6 g or ¼ tsp per 5 gallons of must). Add SO2 as soon as the fruit is crushed. Make sure to mix it completely throughout the entire must volume. Helpful hint: It’s convenient/easy to add the SO2 as the crush is taking place in 5 or 10 gallon increments!
-
Lallzyme Cuvee Blanc: Use 0.1 g/gal of must. When the crush is over and the SO2 has been completely mixed in, add Lallzyme Cuvee Blanc. Best to dissolve in some room-temp water and stir into the entire must volume. Note: Lallzyme Cuvee Blanc is only to be used if macerating your grapes. See Product Description for more details.
- Opti-White or Booster Blanc: Use at 1 g/gal must. Dissolve in 10x its weight in water or juice and mix it completely throughout the must.
Once pressed:
-
Test and correct pH, TA and Brix (sugars). Full, step-by-step explanations on how to do this is given in our White Winemaking Manual (available online or as a printed copy).
-
FT Blanc Soft fermentation tannin: Can be used at 0.2-0.6 g/gal (5-15 g/hL). We recommend starting with an initial rate of 0.5 grams per gallon. Sprinkle directly onto the must and mix thoroughly to ensure even homogenization. Important: if you are using enzymes (Lallzyme) you must wait 8 hours after the enzyme addition before you add your tannins or you run the risk of neutralizing the enzymes before they have had a chance to do their job!
- Hydrate your Yeast with Go-Ferm Protect. Once ready stir into the entire must volume. A full explanation is given in our Yeast Hydration manual (available online or as a printed copy).
At the first signs of fermentation/cap formation (1–2 days after inoculation):
- Fermaid-K (#1): Use at 1 g/gal. Add enough room-temp water to make a slurry and mix into the entire must volume.
After 8–10 °Brix have been consumed (usually ⅓ to ½ way through the fermentation process):
- Fermaid-K (#2): Use at 1 g/gal. Add enough room-temp water to make a slurry and mix into the entire must volume.
