Ageing and Storing Wine

Our Plastic Carboy fermenters are made from PET plastic (same as 2L soda bottles) which is far more resistant to oxygen than regular plastic. Plastic PET carboys are safer than glass carboy fermentors. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury.  Specifications Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.5 lbs Rated to 140 degrees F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Can withstand up to 10 psi of pressure with no deformation The bases have switched from flat to semi-flat to prevent sediment disturbances during transers

Read more less

Stainless Spigot for the Speidel plastic fermenter. This is a great upgrade if you are looking to improve your fermenter with a sturdier spigot. Made from 304 stainless steel. 3/8" barb on outlet

Read more less

This is a replacement cap for our line of Speidel Plastic Fermenters.  It has a gasketed seal, and serves to close the fermenter.  This is also the same cap used on our Speidel Tank Airlocks.

Read more less

Our Plastic Carboy fermenters are made from PET plastic (same as 2L soda bottles) which is far more resistant to oxygen than regular plastic. Plastic PET carboy fermentors are safer than glass carboys. Full carboys can be heavy and hard to maneuver and glass can break resulting in possible injury. Specifications Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.5 lbs Rated to 140 degrees Height: 19 inches Diameter: 10.5 inches Completely taste and odor free Carboys can now withstand up to 10 psi of pressure with no deformation The bases have been switched from flat to semi-flat to prevent sediment disturbances during transfers

Read more less

Our Plastic Carboy fermenters are made from PET plastic (same as 2L soda bottles) which is far more resistant to oxygen than regular plastic. Plastic PET carboys are safer than glass carboys. Full carboy fermentors can be heavy and hard to maneuver and glass can break resulting in possible injury. Specifications Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.0 lbs Rated to 140 degrees Height: 16 inches Diameter: 9 inches Completely taste and odor free Can withstand up to 10 psi of pressure with no deformation The bases have switched from flat to semi-flat to prevent sediment disturbances during transers

Read more less

Replaces the rubber airlock stopper that comes with our Speidel plastic tanks. Does Not include the airlock shown in the photo. Stopper height: 1 3/8". Upper diameter 1 3/4". Lower diameter 1 7/16". Inner diameter 11/16". Color may vary.

Read more less

Replaces the oversized airlock that comes with our Speidel plastic tanks. Does Not include the stopper shown in the photo. Height 5 3/8". Outer diameter 2 7/8". Stem outer diameter 23/32". Stem inner diameter 9/16".

Read more less

Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters Ported lid with removable cap sized for a #5 stopper & airlock Carrying harness included for easier handling Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment.  Each carboy comes with a carrying harness. Features: Gasketed lid for tight seal Included carrying harness Ported lid ready for #5 stopper & airlock 165mm (6.5") lid opening Continuous thread, 5mm pitch Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid January. Made in Italy, these are premium glass carboy fermenters that are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly, over a longer period of time. This 3 gallon size works great for splitting up batches, making mead, and topping off wine.  Dimensions: Height: 17 inches Width: 8.5 inches

Read more less

Fermonster solid lid. Fits all sizes. Does not include a gasket.

Read more less

Half gallon clear glass jug with finger handle molded into glass. Uses 38mm screw tops (sold separately). Bottle Specifications: Capacity: 64 fl Oz Height: 10.4 inches Outside Diameter: 4.8 inches

Read more less

Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 5 gallon size works great as a secondary fermenter and for fermenting meads/wine. Our top recommendation for glass carboys.    Specifications: Weight: 12.4 pounds each Dimensions: 20.0"H x 11.0"w x 11.0"d Country of origin: Italy

Read more less

Replaces lid o-ring for all sizes of Fermonster Plastic Carboys.

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind, and still sells for less than $30. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The smooth ribless walls are a feature that reduces yeast and sediment buildup, and imbedded are volume markers at five, six, and 7 gallons. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon is a monster of a fermenter, reducing blowoff issues seen with standard carboys. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse; and while movement is manageable, these can be upgraded with our Carboy Carrier. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is impermeable to Oxygen penetration Volume Markers at 5, 6, and 7 Gallons O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

Silicone gasket to fit our Speidel plastic tank adapters (FE740, FE741, FE742, FE745, FE746).

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version inlcudes spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Replaces the spigot and collar that come with our Speidel plastic tanks.

Read more less

Got a stuck lid on your Fermonster? Get it open much easier with this specially designed lid opener. It easily slides onto the lid and gives you comfortable hand grips to open a stuck lid. Note: We do not recommend using this tool to tighten the lid because the seal is made by the o-ring and not the pressure between the lid and neck.

Read more less

Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 6 gallon size works great as a primary fermenter for beer, wine and mead. Our line of Itailan carboy is our top recommendation for glass carboys.    Specifications: Weight: 14.0 pounds each Dimensions 21" x 11" Country of origin: Italy  

Read more less

The Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Wide mouth carboys are the easiest glass fermenter to clean with plenty of room to get your arm inside to scrub Add bagged flavoring additions and remove them freely when finished—this can be nearly impossible with traditional narrow neck glass carboys Watch fermentation activity as it's happening! The ultimate advantage of translucent glass or plastic fermenters Ported lid with removable cap sized for a #5 stopper & airlock Carrying harness included for easier handling Glass carboys have been a staple of the brewing and winemaking world for generations, but traditional tight neck carboys aren't without their limitations. Standard glass carboys can be difficult to clean after fermentation and require a siphon or racking cane to transfer liquid out. The wide mouth carboy is extremely easy to clean—simply removing the lid allows you to get your hand or arm all the way inside to scrub away stubborn sediment. And with a convenient spigot at the bottom, you can transfer liquid out of the vessel with ease. Each carboy comes with a carrying harness. See below for optional stainless steel spigots. Features: Gasketed lid for tight seal Included carrying harness Ported lid ready for #5 stopper & airlock Plastic spigot with 3/8" OD barb (tapers from 10-12mm) 20mm (0.78") diameter spigot hole 165mm (6.5") lid opening Continuous thread, 5mm pitch Please note: The carrying harness should not be used to move the vessel when full. The airlock lid is primarily recommended for short fermentations.

Read more less

The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version includes Spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less