Harvest & Crush

Say goodbye to your days of picking up and shaking carboys.   Use the Lees Stirrer to quickly and easily degas wine, stir your lees back into suspension, or mix in additives. Attaches to a drill for fast, easy stirring. The blades fold down so you can easily insert it into a barrel or glass carboy. When you turn the drill on, the blades expand to create a powerful stirring action. We do not recommend using in a carboy that is topped full. (The stirrer displaces too much liquid and creates a vortex that will send wine out of the top.) In these cases a hollow racking cane works exceptionally well.    Works with 3/8" or larger drills. Stirrer is around 22" long.

Read more less

A plastic filter basket that can be used to drain off small amounts of must.  Allow the free run wine to flow through while you collect the skins for your grape press. approx. dimensions are 10.25 inches in diameter, 5 inches tall, and 4.75 inches deep. Made in Italy. 

Read more less

After using the Italian crusher/destemmer units for many years ourselves, we designed and manufactured a special accessory stand that is just tall enough to allow grapes to drop directly into your fermenter or transfer container. Many customers opt to use our 32 Gallon food-grade containers (which we sell as WE509). A regular garbage can can be placed at the end of the unit to collect stems. By using the stand you eliminate the need to move the must and stems from container-to-container, thus saving time and energy. This model fits our WE220 and WE223 series of EnoItalia Crusher/Destemmers. Does not fit models from other manufacturers. Please Note: This stand comes broken down, and will require assembly. Estimated Overall dimensions: Footprint: 32 1/4" long x 22" wide Height: 40" high. Top Tray Inside dimensions 32" long x 14" wide

Read more less

White FDA approved food grade fermenters for the intitial ferment of wine, especially red wines. 24.25" round by 27.5" tall. (Handles stick out 2.5" on two sides)

Read more less

Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed end for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 5lbs. Shipping weight is 30lbs as these ship out as a UPS oversize 1 package. 46" Height

Read more less

Easy-to-operate, highly-efficient fruit crusher Made from high-quality rust-free materials throughout Optimum milling of apples and pears to provide the highest possible yield when juicing 2,200 lbs per hour processing capacity Stainless steel, re-grindable, reversible, hardened blades Made in Germany by Speidel We have been offering the Speidel Apple & Pear Mill for nearly two decades and it continues to be our most popular crusher year after year. This fruit grinder impresses with its quality, functionality and safety. From the chute to the motor, this unit is made entirely in Germany. The body of the crusher is made from food-safe, high-quality PE plastic that provides extreme durability. The large funnel at the top makes feeding fruit quick and effortless while the integrated roller allows the unit to be moved and transported with ease. Cleanup is as simple as spraying down the funnel and blade assembly with water. The only maintenance the mill needs is occasionally sharpening the grinding blades. Do you want optimum milling for pressing and fermenting your apples and pears for Cider? If so, the Speidel Apple and Pear Mill is just right for you. It shreds apples and pears in an optimum manner; not too coarse, not too fine – exactly the right size of cut to guarantee you the highest possible yield when juicing (without fruit pulp in the juice) as well as speedy fermentation! Simple to Operate The Speidel Apple and Pear Mill is easy to use. Simply plug it in, switch it on and start feeding your apples or pears! It has a large feed-hopper to make it easy to fill in the fruit directly from the box. It can handle up to 2,200lb of fruit per hour. Cleaning is simple: just remove the feed hopper and spray off the appliance and the hopper with water. Maintenance-Free The Speidel Apple and Pear Mill is almost maintenance-free. Only the cutter blades should be sharpened from time to time. Rust-Free for its Service Life Hopper, motor block, cutter blades, apron, feet etc. are all made of high-quality rust-free materials requiring neither care nor any special treatment. No rust even after years of use. Safety is a Top Priority The Speidel Apple and Pear Mill complies with all applicable European Safety Standards (CE Sign). Additionally, the motor is equipped with a thermal overload switch. The feed hopper has both reach-in and switch-on protection. Polyethylene shield to protect the cutters and the motor against any unauthorized intervention and against splashing water. Mills Ready for Pressing & Fermentation No fruit pulp in the pressed fruit juice Highest possible juice yield when pressing Optimal conditions for fast, healthy fermentation Specifications: Feed hopper Made of heavy-duty orange PE plastic (recyclable) Lower part Made of heavy-duty black PE plastic (recyclable) Motor 220V 1-Phase, 50Hz, output 2.2 kW (3HP), speed 2,800 r/min On / Off Switch with lock-out feature Connection 220V, 50Hz Cutting Unit Made of stainless steel, re-grindable, reversible, hardened blades Other Info Up to 2,200lb/hr; Rust-Free; All Parts Food-Safe Height (in) Length (in) Width (in) Discharge Height (in) Weight (lb) 49.2 13.8 30.1 15 55lb Supplied with a 7' power cord. You will need to wire on the correct 220v plug. CE Certified FAQ: How much can be processed with the grinder in what amount of time? The ​Speidel Apple & Pear Mill can process roughly 2,200 lbs of fruit per hour. Why did the grinder suddenly switch off during operation? Too much fruit has been loaded in, the grinder may be overheating and needs to cool down. Feed fruit more slowly. The funnel is not seated correctly. The switch-on safety device is no longer actuated. Check the fit of the funnel and the setting of the tension locks. Overload on the power line. Check the fuse. What maintenance work must be carried out? The unit is almost maintenance-free. Only the blades should be sharpened from time to time. Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the unit with the appropriate plug.  

Read more less

Rugged punch down tool at a fantastic price. Exterior 1" diameter 304-type stainless tubing is polished to a mirror finish. Bottom disc is 12" in diameter with four large holes to decrease pressure during punch down. Features Polished Finish 12" disc made from 10 gauge thick stainless Capped/Sealed ends for easy cleaning and sanitizing Constructed from 304-type stainless steel Actual weight is 7lbs. Shipping weight is calculated at 70 lbs because these ship at FedEx oversize 2 rates. 72" Height

Read more less

Used to stir up lees in a barrel or to ensure a complete mix of so2 or any other addtives, our stainless steel lees stirrer with 24" solid stainless shaft and fold out stainless paddle will get the job done quickly and efficiently.  Connect to drill and use on lowest speed. Included black plastic bung seals barrel while stainless shaft spins freely. 

Read more less

This a single replacement blade for our WE590 Stainless Lees Stirrer with Plastic Blades. It's easy to break these off, and so we brought in replacements to avoid having to get a whole new unit! Customers of ours have also gotten creative and created custom tank mixers by attaching these to a long stainless shaft that they have had fabricated. Please Note: This is a single blade, you will need to purchase two if you need to replace both.

Read more less

Don't hurt your back lifting and moving fermenters of must that can weigh up to 150 pounds. This dolly is made from tough plastic and features five sturdy casters. It locks onto the bottom of our food grade wine fermenters allowing for easy transport. Does not fit our 10 gal white plastic fermenter (WE505)

Read more less

Need to de-gas a carboy full of wine? Say goodbye to swirling your wine for 10 minutes by hand! “The Whip” Wine Degasser will have it done in no time!   De-gas your wines quickly and easily with this lightweight, drill mounted degassing rod for wines. It features a plastic shaft with an offset ""hook"" for quickly degassing wines. To use, mount the sanitized degassing rod on an electric drill. Insert through the neck of the carboy, and the slowly increase the speed of the drill. Reduce the speed or stop as the bubbles come out of solution. As the bubbles subside, you can begin again. Repeat until large amount of bubbles stop coming out of solution. Take care to keep the spinning wings submerged, you do not want to agitate the surface of the wine and oxidize it. Lightweight inexpensive no more swirling for 10 minutes by hand!

Read more less

Picking shears are ideal for picking grapes. With plastic coated metal handles, and small curved metal jaws, they let you get into the canopy and drop the grape clusters easily and quickly.

Read more less

Imported grape picking bucket from Italy with a sturdy handle.  Is more maneuverable than a 5 gallon bucket when trying to get in and around grapevines and is also much easier to carry. They do a lot of handpicking in Italy... they have it figured out! *Basket color may vary

Read more less

Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 1" Outer Diameter - 1.33"   Please Note: Made to Order lengths have a lead time of approximately 2 weeks.    

Read more less

This is a very simple, but highly effective tool for picking grapes. Essentially a funnel that does not have a hole. Hold it one-handed underneath a grape bunch and clip off the grapes with your other hand.  Way easier than holding a bucket where the handle, and your hand, are constantly in the way.    

Read more less

Simple, hand operated crusher for home cider makers 24" x 17" stainless steel hopper Fruit is cut up by knife blades before passing through the aluminum rollers Compact design can sit on top of your fermenter or press Made in Italy by EnoItalia Make your own apple cider with this easy-to-use manual crusher! Put the apples (or pears) into the 24" x 17" hopper and crank away. The knife blades cut the apples and the aluminum rollers grab the apples and pull them in and smash them up  yielding a pulp that can then be pressed. Hand operated, place over one of our white fermenters or directly on top of your press.

Read more less

The Hygienic Shovel was specifically created for the handling of grapes, must and pomace. The Solid One-Piece Shovel is tough, light-weight and easy to clean. Its large scoop allows you to quickly move grapes and must, and it won't damage or scratch stainless steel tanks and vats! Made of high-grade polypropylene which is virtually unbreakable and immune to rust or rot, and has been approved under FDA regulations for direct food contact.

Read more less

All stainless grape destemmer with built-in must pump Screw Feed provides fast, continual hands-free operation Rubber tipped destemming bar for softer processing 4,000 - 4,500 lbs/per hour processing capacity Removable stainless basket for easy cleaning Made in Italy by EnoItalia For the serious home winemaker or a very small winery, this machine represents an amazing value. It is gentle, easy to load, and pumps the grapes into your awaiting fermenter, eliminating the need for a separate must pump. Why No Crushing Rollers? Because you don't need them. Here is how it works. You put fruit in the top bin and the screw feed moves the fruit to the left where it drops down into the destemming chamber. The fruit is destemmed and grapes drop down through the grate to the next level. Stems are ejected out the end of the destemming chamber and onto a tarp on the ground. After the fruit drops through the destemming chamber it falls into a bin at the bottom of the machine that has a screw feed. The screw feed pushes the grapes to the right where they are pushed into a circular chamber. In the circular chamber, a paddle wheel, pushes grapes back out the exit tube, through a 3" hose, you attach, and into the awaiting fermenters. Why this machine is so popular in Italy Because they know you don't need rollers on this type of machine. The action of the two screws, the destemming chamber and the paddle wheel crack the berries. More on the Built-in Must Pump The built in paddle-wheel style must pump can push fruit an average of 12' high with a 10' horizontal run OR up to 4' high with a 40' horizontal run. These are estimates only: actual results will vary on factors such as the total load on the machine and the viscosity of the must in the transfer tube. It can only be used at processing time and cannot be used later in the winemaking process. A Great Value! We recommend this machine for small wineries or larger home producers who do not wish to make the considerable jump to truly commercial quality equipment. You can make very, very good wine with this machine and we often tell small winery owners that the money saved can be used more effectively in other ways to make great wine.  Summary of Features: 1) Stainless Body, Bin, Agitator, and Screw Feed 2) Removable stainless basket for easy cleaning (Destemming basket holes are 1.0225" wide) 3) A Screw Feed for continual, faster, hands-free operation 4) Rubber tipped destemming bar for softer processing 5) Output of 4000 - 4,500 lbs/per hour 6) Paddle wheel style Must pump built in with 3" TC Outlet 7) A powerful Single Phase 220V 2 HP motor (12.1 amp draw) with starting capacitor 8) High-quality units made by Enoitalia of Italy 9) Replacement parts are available 10) Two casters allow for easy wheel-barrow type movement 11) Emergency stop button 12) Length 46.5" (118 cm), Width 27" (68 cm), Height 35.4" (90 cm), weight 207 lb (94 kg) 13) Unit comes with bare cord wire. Wire on the appropriate 220v plug for your electrical connection.   Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

These stainless punch-down tools are ideal for punching the cap on a red wine ferment back into solution. Our 48" long punch is great for the home winemaker fermenting in plastic barrels or small stainless fermenters. 48" Long with an 8" Disc. The disc is slightly smaller than our other models making it perfect for punching down in smaller fermentation vats, such as our food-grade garbage can style containers.

Read more less

Food-Grade, FDA approved tubing with an outer spiral reinforcement "helix" ensures a kink-free transfer every time. Nutriflex tubing is made for transferring wine or must from container to container. The inside is smooth and without any crevasses for errant material to get caught in. Small bend radius means it will hold its shape even around tight corners. Working temperature range of -15F - 158F. Inner Diameter - 2.5" Outer Diameter - 3.05"  

Read more less