Distilling Equipment & Accessories

Copper scrub pads are great for cleaning stainless steel equipment, and can also be used as packing material for pot or reflux stills to enable the release of sulfides. Made from pure lead-free copper.   Kegland Part number: KL08907  

Read more less

Stainless steel distillers parrot used to take gravity readings continuously throughout the distilling process. Placed inline with the outlet of the still so drops of distillate drop directly into the parrot. Maximum capacity of 105 ml, not including the alcohol meter. Specifications: Max Capacity: 105 ml (w/o alcometer) Weight: 1.9 lbs Made from 304 Stainless Steel Kegland Part number: KL14823 I.D. of 19mm (0.74")   Alcohol meter not included. Kegland Part number: KL14823  

Read more less

Add a 2" tri-clamp port to any tank or lid with this 304 stainless steel weldless bulkhead. Just drill a 45-47 mm hole and tighten this item to your vessel wall. For distilling purposes, this is perfect if you want to fit an extension tube between the BrewZilla / DigiBoil distillation lid and the copper pot or reflux still. Kegland Part Number: KL10979

Read more less

The DigiBoil electric kettle can serve a surprisingly wide range of functions. It's perfect for 5-gallon extract batches, preheating strike or sparge water, and with the addition of a still top lid and condenser, it can be used for home distilling. With the Mash Upgrade Kit, you can easily use the DigiBoil as an electric mash tun. The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. This model runs off 110V power and has dual heating elements (1000w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2"). Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130 & DS120)* External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed *Distilling: using the DigiBoil with a distilling condenser requires the still top lid and gasket (DS124). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). KegLand Part Number: KL07245

Read more less

Hydrometer for testing alcohol levels in distilled spirits. Will only work in solutions of ethanol and water, will not read the alcohol levels of beer or wine. Reads alcohol percentage on scale of 0-100%, and "Tralle's scale" (Proof) on a scale of 0-200.  Specs: Range: 0-200 / 0-100 Unit: Proof/Tralles Div.: 1 Accuracy: ± 2 Calibration temp.: 60°F Length: 11.4" (290mm)    

Read more less

Hydrometer for testing alcohol levels in distilled spirits. Will only work in solutions of ethanol and water, will not read the alcohol levels of beer or wine. Reads alcohol percentage on scale of 0-100%, and "Tralle's scale" (Proof) on a scale of 0-200. Proof Range:  0-200 Proof Alcohol % Range:  0-100 % Overall Length:  11 1/4 inches Diameter: .67"

Read more less

Carbon filterting neutral spirits is done to remove the fusel oils. This kit has been designed to be used with small amounts of neutral spirit up to 1L at a time. Kit Includes: 1 - 4" x 2" T.C. Concentric Reducer 1 - 2" T.C. Extension Tube 2 - 2" Tri-Clamps 1 - 2" Silicone Gasket 1 - 2" Teflon Gasket w/ Mesh Screen 1 - 2" T.C. x 3/4" Female BSP 1 - 3/4" x 1/2" BSP Reducing Bush 1 - 9.5 mm Duotight x 1/2" Ball Valve 1 - Roll of Plumber's Tape 1 - 500g Pouch of Food Grade Activated Carbon KegLand Part Number: KB01225

Read more less

The Alembic Copper Domed Lid fits the DigiBoil 35L and BrewZilla 35L.  The large copper surface area of this copper dome acts as a catalyst with the vapor in the still and help to enhance and concentrate the flavors and aromas during the distilling process. It can also help remove unwanted sulfur compounds which results in a smoother richer, sweeter tasting spirit. This unit was primarily designed to be used with the AlcoEngine Pot Still. But can also be used with the AlcoEngine Reflux Still if you wish. Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. 9-1/2" Tall 12-3/8" Diameter. Please note that copper is a very soft metal and can be dented quite easily. Store and use with care. KegLand Part number: KL15899   Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).     

Read more less

Hydrometer for testing alcohol levels in distilled spirits. Will only work in solutions of ethanol and water, will not read the alcohol levels of beer or wine. Reads alcohol percentage on scale of 0-100%. The 9-1/2 inch alcoholmeter has a larger scale and better resolution than the shorter alcoholmeter, however it requires a larger sample for testing.

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Distillation takes just two hours and produces enough alcohol each time to make a 1 liter bottle at 56-60% ABV. No compromise on quality. Revolutionary non-technical design. No hoses, no complicated assembly, just plug and play! As simple to operate as the kitchen kettle. Great value for money. Safe and easy to use which is ideal for the pilot distiller. Can be used for alcohol distillation or water distillation - produces 100% pure, safe drinking water.   Unit holds 1 gallon of liquid.   Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsiblity to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). 

Read more less

Carbon filterting neutral spirits is done to remove the fusel oils that give spirits a harsh taste and smell. This kit has been designed to be used with small amounts of neutral spirit up to 1L at a time. Kit Includes: 1 - 2" T.C. Extension Tube 2 - 2" Tri-Clamps 1 - 2" Silicone Gasket 1 - 2" Teflon Gasket w/ Mesh Screen 2 - 2" T.C. x 3/4" Female BSP 2 - 3/4" x 1/2" BSP Reducing Bush 2 - 9.5 mm Duotight x 1/2" Ball Valve 1 - Roll of Plumber's Tape 1 - 500g Pouch of Food Grade Activated Carbon KegLand Part Number: KB01201

Read more less

Extension tube with 2" tri-clamp fittings on both ends. 10" in length. Made from 304 stainless steel. Kegland Part Number: KL10665

Read more less

Replacement 3mm thick gasket for the 35L Distillation Lid. Note: The 3mm gasket works well with Gen 3 and older BrewZillas and Gen 1 DigiBoils. If you have a newer model, we recommend the 6mm Gasket for a better seal. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL03490

Read more less

Stainless steel Tri-Clamp reducer going from 4" T.C. to 2" T.C. Kegland Part Number: KL06156

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   A perfect addition to your pilot distilling T-500 or Grainfather. Make a London Dry style gin with the Gin Botanicals Kit and Botanical Basket. Simply make your spirit wash as normal, put your Botanicals Kit ingredients into the basket and screw the basket on to the Alembic Pot Still dome and condenser or T500 condenser (by removing the saddles) and run your spirit through. You can also use the Botanicals Basket to infuse your spirit with other flavors e.g. citrus or elderflower for your own unique brand of spirit.

Read more less

This Copper Pot Still features male garden hose quick disconnects as opposed to barbed fittings. Our connection kit includes female quick disconnects and tubing for the coolant inlet and outlet. The Copper Reflux Still is also available with barbed connections. This flow management (FM) design of reflux still has been designed to create high percentage pure neutral spirit.   The FM technology used in this design makes this process robust and easy to use. No need to worry about water pressures and fine tuning of water flow speeds. The FM design gives you direct control of the reflux ratio and therefore the purity of your end product. It’s never been so easy to enjoy the craft of distillation.   Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top.   Kegland Part number: KL04640  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The Air Still Pro is a small-batch, 2-in-1 distillation system that allows you to craft high-quality light and dark spirits. With a multi-purpose condenser and interchangeable distillation tips, the Air Still Pro enables you to produce clean, neutral spirits at up to 90% ABV in reflux mode and make flavorsome and botanical-infused spirits at up to 80% ABV in the pot still mode.  An automatic foreshots collection vial captures the first 30 ml of distillate, allowing you to discard foreshots easily. This advanced feature improves safety and saves you extra steps in the process. In addition, other reflux stills may require an input cooling source, such as water, but the Air Still Pro column cools itself. The Air Still Pro is easy to use and suitable for keen beginners or more advanced distillers looking for a multi-purpose air still. Also available as the Air Still Pro Head Unit to upgrade your Still Spirits Air Still. Features: Capacity: 1 Gallon (4 L) Yield: 2.4 Quarts (2.25 L) of 40% ABV alcohol per 2.1 Gal wash (8L) Pot Still Mode: Distills at 80% ABV (160 proof) before diluting to 40% ABV (80 proof) Reflux Still Mode: Distills at 90% ABV (180 proof) before diluting to 40% ABV (80 proof) Dimensions: 12.5" H x 18.1" W x 19.6" D Weight: 21.4 pounds Power: 110V Manufacturer's Warranty: 3 years Included in the box: Air Still Pro Head Unit with a pre-packed reflux column Air Still Pro Boiler and power cable Botanical basket 2x glass foreshots collection vials Easy-swap distillation tips for reflux and pot still modes Distillation tip spanner Starter guide

Read more less

This kit is for connecting your garden hose to the Copper Pot Still and Copper Reflux Still condensers (DS120 / DS130). The vinyl tubing is connected to the yellow female quick disconnect and then attached to the cooling water inlet and outlet on the condenser. To attach the tubing, unscrew the QD's locking ring, attach the tubing to the barb, and thread back on the locking ring. The ring will compress the tubing around the barb and provide a tight seal. Includes: 2 x Female Plastic Quick Disconnects 2 x 10 ft. lengths of 1/2" ID vinyl tubing 1 x Female garden hose by 1/2" barb adapter 1 x Hose clamp  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Replacement Silicone Ring for the T500 Lid (DS201).

Read more less

Compatible with 35L BrewZillas and DigiBoils. Designed to be extremely sturdy when using heavier stills or off-center steam condenser units. Pairs perfectly with AlcoEngine Still Tops or the BrewZilla Steam Condenser Set. The PPSU sight glass allows you to watch your wort or wash boil and keep an eye on foaming issues. For brewing with the Steam Condenser Set, the sight glass is easily removed for adding hops or other boil additions. (Use gloves, it will be hot!) PPSU is an excellent choice for components that are exposed to high temperatures (up to 392°F / 200°C) and corrosive media due to its exceptional chemical resistance. As well as being extremely impact resistant. KegLand decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. Intricate parts can be injection molded that would have been near impossible to do with stainless steel or lab-grade glass. For use with an AlcoEngine Still Top, you will also need this single sided bead seal.  Installing AlcoEngine Still: Remove the bottom nut and seal from the column Place the single sided bead seal on the lid's tri-clamp ferrule (beaded side facing down) Pass the threaded bottom section of the column through the ferrule Secure in place with a 2" tri-clamp The column's bottom nut and seal are not needed Specs: 2" T.C. top ferrule port 3" T.C. sight glass ferrule Lid handles with molded grips Thicker silicone lid gasket for a tighter seal Includes: 3" PPSU sight glass disc 3" tri-clamp 3" silicone tri-clamp gasket Silicone lid gasket KegLand Part Number: KL25812

Read more less

Eliminate oxidation in your bottling process with the XF460HP volume-based filling system Made specifically for high proof spirits, featuring components with better resistance to high concentrations of ethanol Liquid is pulled from your barrel or storage tank by the built-in self-priming pump Filling volume is programmed and stops automatically Optional gas flush system Made to order in the United States Eliminate oxidation in your bottling process by using the XpressFill volume-based filling system! The XF460HP four bottle filler is now available specifically for High Proof Spirits. Susceptible components have been replaced with material more resistant to higher concentrations of ethanol.  The XF460HP can easily accommodate very small to very large bottles with its adjustable shelf, allowing great flexibility.  Easy to use, compact in design, precise volume filling, high quality components, hand-crafted in the USA. Gravity-based systems usually involve spirits being transferred to a holding tank, and unless your bottles and holding tank are pre-flushed with inert gas, some degree of oxidation is inevitable. Xpress Fill bottling systems have a closed pathway with a self-priming pump. They also have as an optional built-in sparging (pre-flushing) system that uses Nitrogen or Argon to pre-flush your bottles. To use, place four bottles under the filling spouts, push the gas button (optional at additional cost) to flush the bottles with inert gas. Then hit the Fill button which pulls the spirit from your barrel or stainless storage tank, distributes 750ml of spirit to each bottle, and shuts off automatically when done. It is truly that simple. Each fill cycle lasts 20 seconds. When using 750ml bottles you can expect to fill about 450 bottles per hour. There is also a manual mode allowing you to top up bottles or fill odd size bottles. The four spout filler features a 3/8" inlet. Features: Made to order in the USA 4 Spout fills approximately 250 bottles per hour Bottle shelf is adjustable to accommodate a wide range of bottles Optional Gas Flush System & Filler to automatically gas-purge bottles prior to filling Weight: 32 lbs Dimensions: 16" W x 17" H x 14.75" D Warning: XpressFill bottle fillers are NOT certified as explosion proof, should be used in a well-ventilated area, and not for use with solvents. It should be noted that 70% alcohol is 140 proof and has a flash point of 70°F, making the product volatile, as well as flammable

Read more less

This complete still kit comes with the 35L DigiBoil Electric Kettle and the Copper Pot Still Condenser. 35L DigiBoil Gen 2 (110V or 220V) 110V / 15A power and plug (5 ft. cord) 220V / 15A power NEMA 6-15 plug (5 ft. cord) Copper Reflux Still Condenser w/ Barb Connections 13 mm Inlet/Outlet Barbs (0.51 in.) Distillation Lid & Gasket Set of Adjustable Lid Clamps Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).   

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The latest product in the Air Still range, this stainless steel basket is suitable to infuse spirits with botanicals, spices, or anything else you'd to throw in! Easily attaches by clipping into the inside of the Air Still lid.

Read more less