Single Spout

What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long. The plastic end fits nicely into our FE346 spigot, or it can be removed to attach 3/8" ID tubing.  

Read more less

Vacuum pump wine bottle filler with 180 bottle per hour filing capacity Automatically starts siphon and shuts off when the bottle is filled Oxygen is evacuated from each bottle before filling Adjustable fill speed to match your preferred pace Fill wine bottles directly from your fermenter, storage tank, or barrel A great bottle filler for the small-scale winemaker. Through the use of a vacuum pump, the Enolmatic filler automatically starts a siphon and automatically shuts off when the bottle is filled to the perfect height. The vacuum also serves to evacuate most of the oxygen from your bottle. The fill rate is fast - allowing you to bottle up to 180 bottles per hour. The Enolmatic creates a vacuum that sucks the wine directly from your fermenter, storage tank, or barrel, which can be located up to 13 feet below the Enolmatic. No need to start a siphon or to have to pump or move your wine above your filling machine. Fill speed can be adjusted allowing you to bottle at your preferred pace. While the filler is in operation wine is not allowed back into the storage tank or barrel due to a one-way valve located in the fill head. The small amount of excess wine runs into a collection reservoir. The fill height can be adjusted and is designed to be used with any size or type of bottle. The Enolmatic has a continuous duty cycle, meaning it can run non-stop and is constructed entirely from food-grade materials. Simply run water through the system to clean out the lines. The reservoir for excess overfill can be rinsed out or ran through the dishwasher. 110V 60 Hz 60 W Includes: Filling Unit with Overflow Reservoir 5ft. of 1/2"ID Feeder Line Collapsible 1/2" racking cane for intake, helps leave the lees behind Detailed Instructions

Read more less

The Buon Vino Super filler for winemaking is a gravity fed bottle filler that shuts off automatically when the proper fill height is reached in each bottle. Very easy to use and perfect for small quantities.  A great choice when you want something more sophisticated than the tube style bottle fillers, but don't need to upgrade to a more expensive electric wine bottle filler.  Usage: To use the filler, place the device on top of the bottle to be filled, insert the intake tube into your vessel containing the liquid, and the small overflow tube into an empty bottle. To begin the siphon, start by pressing down on the center plunger on the flow regulator to open the valve.  Suck on the end of the overflow tube until the liquid begins to flow into the bottle. When liquid is flowing into the bottle, put the overflow tube back into the empty bottle. When the liquid reaches the top of the bottle, the valve will shut the flow off automatically.  After the first bottle, check the level of the fill and adjust the level up or down if necessary by moving the rubber bottle seal up or down. Please note that the fill level can be affected by excessive foaming. After one bottle is filled, move the bottle filler to another empty bottle, push down on the plunger lever, and repeat. Comes with 6 ft. of tubing.

Read more less

Replaces the entire fill nozzle assembly on the WE620 Enolmatic Bottle filler, including the support arm and spring.

Read more less

A replacement lid for the rear overflow reservoir on the Enolmatic filler. Includes the float assembly which breaks the vacuum and stops filling if the reservoir becomes full to prevent messy overflowing.

Read more less

Replacement siphon starter bulb for 3-spout and 5-spout bottle fillers. This is included in our WE602 and WE605 stainless steel bottle fillers, and can be purchased as an option upgrade for the WE604 painted filler. This siphon starter will save you a lot of hassle, and allow you to start a siphon in the fillers tubes while maintaining sanitary conditions.  The siphon starter features a food grade plastic bulb and tubing, and a black rubber "boot" that fits tightly around the end of the bottle filler tubes. To use: Connect your bottle filler to the wine source and allow the reservoir to fill. Sanitize the siphon starter, inside and out Squeeze the bulb to remove most of the air. Fit the rubber "boot' or base around the end of the bottle filler tube. The hole in the boot must line up with the hole where the wine will come out. Gently press down on the filler tube so that the gasket is not touching the inside wall. Slowly let go of the pressure on the bulb. The bulb will suck the air out of the tube, and wine will follow. Stop when you can hear or feel wine going into the bulb siphon starter. Repeat for each filler tube you would like to use. Wash, sanitize, and dry the siphon starter bulb before storage  

Read more less

The Ferrari auto bottle filler is a great economical bottle filler option. This unit will automatically stop when the bottle is full.  No more messes from accidentally overfilling your bottles. Their patented design is one of the best on the market at a price that can't be beat!

Read more less

A replacement o-ring for the underside of the lid/float assembly on the reservoir of the Enolmatic Filler.

Read more less

Fill still or carbonated wine into bottles from a pressurized vessel, such as a stainless keg. Connects to keg and to inert gas source (Argon, Nitrogen) at the same time. Included all stainless steel three way ball valve allows you to purge the bottle with gas and then fill with wine. This is the safest, highest-quality method to get your wine into bottles, because it allows for complete purging of the bottle and filling from the bottom up. Works great for the home winemaker when you are utilizing the benefits of stainless kegs for storage. Made entirely from 304 stainless steel and food grade plastics. Not shown in picture is an included brass pressure-relief valve used when filling carbonated wine into bottles. Mfg by MoreWine! Beer barb is 3/16". Gas barb is 5/16".

Read more less

Everything you need to use your counter-pressure filler. Connects your new Counter Pressure filler to your existing ball lock kegging system with a convenient, included, plastic inline quick-disconnect. Includes: Hardware to connect filler to gas system: Gas line tee, quick disconnect set (see Gas and Beverage quick disconnect sets on preceding page.), 6' of gas line. Hardware to connect filler to keg: Threaded, black beverage out qd, related flare fittings, 5' of beer line To Install: Shut off your gas. Cut your existing gas line assembly and clamp the Co2 Tee in that place. Clamp the gas line and beverage line to the Bottle Filler. Gas line on the larger barb fitting, beverage on the smaller barb. Make sure the counter pressure filler is closed by placing the valve handle perpendicular to the valve. Attach the beverage ball lock quick disconnect to your keg. Never attach a beverage out fitting to your keg without it being in a closed system. Connect the gas line quick disconnect. Finally turn your gas back on. You're ready to fill. *Note: If you have a pin lock keg you will need to purchase our Pin Lock Beverage Out - Flare fitting KEG760 .

Read more less

Replacement rear overflow reservoir for the Enolmatic filler. Does not include the lid.

Read more less

Replacement Rubber Cup for the Enolmatic Plastic Nozzle.  

Read more less

Adjustable filling height with automatic stop Stainless steel base, frame, and filling nozzle Adjustable filling level and filling speed Vacuum gauge The Ultrafiller 1 is built entirely in stainless steel with PYREX tank, featuring high efficiency and precision stainless steel filling nozzle. This professional bottling machine is perfect for wine, uncarbonated beer or cider, spirits, and oils. When you place the bottle under the Ultrafiller 1, the fluid is sucked into the vacuum created inside it, without any contact between the liquid and the pumps or mechanical components. Why Choose ILTEC While the Enolmatic has served as a great economical option, the ILTEC offers a significant step up in overall quality and durability. The key differences speak for themselves: Stainless Steel Construction: Unlike the Enolmatic's plastic components, the ILTEC boasts a robust stainless steel construction, ensuring long-lasting performance and easy sanitation. Borosilicate Vacuum Chamber: The ILTEC utilizes a borosilicate vacuum chamber, a superior alternative to the plastic chamber found in the Enolmatic. Borosilicate glass is known for its exceptional resistance to thermal shock and chemical corrosion, guaranteeing a cleaner and more efficient filling process. The ILTEC filler isn't just about superior materials; it's about delivering consistent, precise, and professional results. Whether you're bottling wine, spirits, oils, or other liquids, the ILTEC provides the performance you demand. Specs: Capacity: 250-300 x 750mL bottles per hour* Bottle Neck Diameter: 16-34mm Bottle Height: 3.9" to 13.75" (100-350mm) Tank Alcohol Tolerance: 80% ABV Max Temperature: 176°F (80°C) Dimensions: 7.8" x 19" 16.5" (200 x 485 x 420mm) Weight: 24.5 lbs Power: 110V, 60hZ, 80W *Capacity may change depending on liquid and bottle size.

Read more less

What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12" long.

Read more less