Kombucha Equipment
-
KegLand pH Meter | Digital Display | Automatic Temperature Compensation | 0.01 Resolution | Buffer Solution Included
The KegLand pH Meter will get you a very accurate reading with its 0.01 pH resolution. The calibration process couldn't be easier to perform, just place the probe in the buffer solution closest to pH of the sample you'll be testing and press the button This pH meter also includes ATC (Automatic Temperature Compensation) so you don't have to get your sample all the way down to room temperature before you take your reading. 3-point calibration allows this unit to be calibrated at three different standard levels - 4.00, 6.86 or 9.18. These standards are included with the pH meter, and refill packs are also available. The pH meter features a replaceable probe in case yours is lost or damaged. Winemaking can be a tough environment for your pH probe so we feel you shouldn't have to buy a whole new pH meter everytime your probe breaks. The cap that holds the probe storage solution has a very tight seal and should prevent your probe from drying out while not in use. Don't worry about getting this meter wet either, because the entire unit is waterproof! Features: Replaceable probe ATC (Automatic Temperature Compensation) Waterproof electrode cap Accurate to 0.01 pH Easy 3 point calibration LR4/AG13 batteries included Kegland Part Number: KL04169 NOTE: Upon first time use prior to calibration, rehydration of the electrode with MT624Bis essential to get an accurate reading for correct calibration.
$60.99
-
pH Paper - 2.8 to 4.4 For Wine - Vial of 100 Strips
pH indicator strips in the range of 2.8 - 4.4 pH, the ranges typically seen in winemaking. The vial contains 100 strips, and a color reference chart for determining the pH on the outside of the vial.
$14.99
-
The FermWrap™ Heater | Fermentation Heater | 40 watts | 115V
Keep your yeast or ML happy and your ferment warm during those cold winter months with this flexible heater made by Fermentap. Using tape to adhere, this flexible heating wrap can be attached directly to your fermenter or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your wine from 5-20 degrees Fahrenheit. If using carboy or bucket you can attach directly using tape (as seen in photo above.) We recommend electrical tape as it sticks and unsticks the easiest. Heating can be contolled by sticking either the entire wrap or a portion of the wrap to the fermenter. In an open evironment we see a heating differential between carboy and ambient of 10-15 degrees. This differential can be increased by using our carboy bag to insulate a carboy (this has been tested.) To decrease the temperature differential, stick only a portion of the heating wrap to the fermenter. For precise results, we recommend using our temp controller (FE610) and carboy thermowell (FE612) for the ultimate in fermentation temperature contol. For heating small stainless variable volume fermenters and barrels up to 30 gallons a single FermWrap! works great. For volumes of 60 gallons or more, we recommend using two or more FermWraps (we do this in our winery Olin Wines all the time!). With 40 watts of heat spread over two square feet it provides gentle even heating. Draws 40 watts. 115V. Manufactured by Fermentap. Kegland Part number: KL0625
$32.99
-
Large High Precision Scale - 500g
This bench-top 500 gram capacity scale has a 0.01 gram readability for super accurate weighing. Features digital auto calibration, a tare feature, counting mode, and is backed by a 10-year warranty. 500g Capacity 0.01g Readability Counting Feature Runs on batteries or AC Adapter, both included Includes two (2) 200g Calibration Weights Backlight can be turned on or off. Detachable lid protects the delicate weighing surface Includes pictured weighing bowl
$49.99
-
FerMonster 7 Gallon Plastic Carboy
Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind, and still sells for less than $30. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The smooth ribless walls are a feature that reduces yeast and sediment buildup, and imbedded are volume markers at five, six, and 7 gallons. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon is a monster of a fermenter, reducing blowoff issues seen with standard carboys. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse; and while movement is manageable, these can be upgraded with our Carboy Carrier. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is impermeable to Oxygen penetration Volume Markers at 5, 6, and 7 Gallons O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$44.99
-
Beer Bottle Brush
A traditional brush for cleaning 12 to 22oz beer bottles. Many customers like this design for its rounded bristles at the end of the brush that do a great job cleaning the lower half of the bottle. Includes circular metal loop for hanging. Bristles are 2.75" in diameter with an overall length of 16".
$5.00 $4.39
-
Fermonster Carboy - 3 gal.
Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
$38.99
-
Milwaukee Digital pH Meter - 0-14 pH Range
Economical pH meter for testing beer, wine, and other products. Features a simple 1 point calibration, accuracy of 0.1 pH, and a range of 0-14 pH. Unit ships in a blister pack with calibration screwdriver, batteries, and instructions. Milwaukee Part Number: pH600AQ
$34.50
-
FerMonster 6 Gallon Carboy With Spigot
The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version inlcudes spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$43.99
-
FerMonster 6 Gallon Carboy
The Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$42.99
-
Inkbird Digital Temperature Controller
The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home wine making. Inkbird controllers allow you to control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. The Inkbird ITC-308S controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from wine making uses, this is a great dual relay output temperature controller for cooking (use in a smoker or bbq), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in
$44.99
-
FerMonster 7 Gallon Carboy With Spigot
The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria. The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version includes Spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$49.99
-
Fermonster 1 Gallon Carboy
Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind! These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
$19.99
-
EZ Cap Swing Top Bottles | Clear Glass Bottles | 32 oz | Case of 12
These swing top bottles are a revolution in beer bottling! The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle. These swing tops are designed to be primarily sealed with a crown cap closure for long term storage. Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be! Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you. Bottles rated to 100 PSI. Case of 12 x 32 oz Flint (Clear) EZ Cap Bottles and 12 Swing Tops. Crown Caps not included (see recommended items below for options).
$60.99
-
Carboy Brush - Stainless Steel (Rust Proof)
Get to the bottom and sides of that glass carboy. The bent head of the brush makes short work of cleaning the Kraeusen (foam on top of beer) after fermentation. This brush is made with stainless steel so you won't have any rusting issues like with other carboy brushes. 26" from end of handle to 90 degree bend. Bristles are approximately 1-1/4" in length.
$7.99
-
Carboy Brush for PET Carboys | Plastic Coated Bristles
This L-shaped brush is the ideal tool for cleaning every inch on the inside of carboys, and thanks to the plastic coating, they won't damage plastic fermenters and PET carboys. Standard carboy brushes like the CE40are great for cleaning glass carboys, but shouldn't be used on plastic. The metal rod where the bristles attach can scratch plastic, which become hiding spots for bacteria. You won't have to worry about that with this carboy brush! Bristles made from Food Grade nylon Long enough to reach deep inside large carboys L-shaped bend allows you to scrub the top portion of carboys that straight brushes can't reach Height from end of handle to 90° bend - 21.5" Brush section with bristles is 8.5" long Bristles are 2.75" in diameter Temperature rated to 140°F (60°C)
$9.99
-
7 gal | Brew Bucket Classic | Ss Brewtech
Upgrade your home winery with an innovative, Stainless Steel, Brew Bucket™ Fermenter! You will enjoy many of the benefits of a stainless conical fermenter but at a fraction of the cost and you are going to love how easy it is to use! Made by Ss Brewing Technologies from polished 304 Stainless Steel, the Brew Bucket™ is not only functional it is downright beautiful. At MoreWine! we know winemaking equipment and we truly believe this is a piece of equipment you are going to enjoy using every season. While originally designed for Home Beermaking, the Brew Bucket has proven itself as a great addition to the home winery. Stainless Steel construction means easy cleaning and long lasting durability, while a tightly clamped gasketed lid means no oxygen permeation and premature spoilage of your wine. This is a great unit for small fermentations, test batches, and kit wines. The entire lid lifts off, making additions or stirring of must hassle-free. Cleaning is equally easy, as the stainless steel construction will resist tartaric buildup, and the wide opening allows for scrubbing if necessary. We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer. The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking! Etched Volume Markers on the inside were super handy when filling. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid. The lid includes a removable, molded silicone gasket that ensures an airtight seal. We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket super easy to move. Overall: Very functional, easy-to-use, will last a lifetime, and looks amazing. Lets make some wine! Features: Certified Food Grade 304 Stainless Steel Construction Patent Pending Stainless Rotating Racking Valve 6.95 gal Max Capacity 40° Conical Bottom for Trub Trapping Nests for Storage, Stacks for Ferment! Molded Silicone Lid Gasket Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 21” Height x 13” Width 10 lbs Note: 1/2" Silicone fits into the lid hole for use as a blowoff. 3/8" ID tubing is perfect for racking beer from the BrewBucket's valve.
$149.95
-
FerMonster 3 Gallon Ported Carboy With Spigot
Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.
$33.99
-
Adhesive Temperature Strip Thermometer
Check your fermentation temperature without having to open your fermenter. This stick-on thermometer comes with a waterproof adhesive that will stick to glass, plastic and metal. Reads temperatures from 39 - 97°F (4 - 36°C).
$2.89
-
EZ Cap Swing Top Bottles | Amber Glass Bottles | 32 oz | Case of 12
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. These easy to use swing top bottles are a winemaker’s dream come true! EZ Cap Swing Top Bottles take the hard work out of bottling your wine. They have the convenience of a swing top, hybridized with the long-term storage capabilities of a standard crown cap. They’re easy to clean, and quick and simple to use. These swing tops are designed to be primarily sealed with a crown cap closure for long term storage. Once you open your wine for consumption however, you have the swing top in place to close it back up if you need to! Bottles rated to 100 PSI. Case of 12x 32 oz Amber EZ Cap Bottles and 12 Swing Tops. Crown Caps not included (see recommended items below for options).
$60.99
-
EZ Cap Swing Top Bottles | Clear Glass Bottles | 16 oz | Case of 12
A revolution in Beer Bottling! The convenience of a swing top, hybridized with the storage capabilities of a standard crown cap; Meet the EZ Cap Bottle. These swing tops are designed to be primarily sealed with a crown cap closure for long term storage. Once you crack your brew for consumption however, you have the swing top in place to close it back up if need be! Whether you're too distracted with other fine brews to taste, or just need to wait your turn at the beer pong table, this is a perfect system for you. Bottles rated to 100 PSI. Case of 12 x 16 oz Flint (Clear) EZ Cap Bottles and 12 Swing Tops. Crown Caps not included (see recommended items below for options).
$49.49
-
pH Paper - 1 to 14 - Pack of 50 Strips
pH indicator strips in the range of 1-14 pH. Use these wide range strips for general determination of the pH, or to reduce the range before using a narrow range pH testing strip. Sold in a bag of 50 strips, with a color reference chart on the front of the bag.
$11.99
-
pH Test Strips - 1.0 to 14.0 (80 strips)
pH indicator strips in the range of 1-14 pH. Use these wide range strips for general determination of the pH, or to reduce the range before using a narrow range pH testing strip. A color reference chart is located inside the booklet. 80 test strips per booklet.
$2.99
-
Glass Fermentation Jar | 1 Gallon | Lid Included | 100mm Lug Finish
Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 100 mm (3.9") wide opening is large enough to add product, and to reach your hand in for cleaning. 100 mm lug finish metal lids included (FE309A). These jars have a lug finish.
$5.79
-
Brush - Demijohn - 35 in Long Bristle
Demijohn cleaning brush; 37 in long overall, Bristles 17 in long x 2-3/4 in wide. Features plastic handle with hook and hole for hanging. Tip of the brush has a slight curve to better fit demijohns and containers with a rounded bottom.
$5.99
-
EZ Cap Swing Top Bottles | Amber Glass Bottles | 16 oz | Case of 12
These easy to use swing top bottles are a winemaker’s dream come true! EZ Cap Swing Top Bottles take the hard work out of bottling your wine. They have the convenience of a swing top, hybridized with the long-term storage capabilities of a standard crown cap. They’re easy to clean, and quick and simple to use. These swing tops are designed to be primarily sealed with a crown cap closure for long term storage. Once you open your wine for consumption however, you have the swing top in place to close it back up if you need to! Bottles rated to 100 PSI. Case of 12x 16 oz Amber EZ Cap Bottles and 12 Swing Tops. Crown Caps not included (see recommended items below for options).
$47.49
-
MonsterMesh Strainer for FermMonster Carboys
This mesh sleeve is custom made for the FerMonster Plastic Carboy. The plastic ring sits inside the neck of the fermenter, and the lid can be secured on top to make an airtight seal. The ring actually holds onto the neck of the FerMonster so there's no risk of the mesh sleeve falling into the carboy. For brewers, the MonsterMesh is perfect for adding dry hops, oak chips, or fruit additions, which can easily be removed at the scheduled time. For winemakers, in addition to adding grape skins or oak chips, the MonsterMesh is a great way to eliminate head space in the fermenter. Simply fill up the strainer with glass marbles to displace as much wine as needed to fill the volume of the carboy. Made from food grade materials, the #50 mesh will not affect the flavor of the beer or wine, and is temperature rated to 122°F. Designed for multiple uses, the MonsterMesh can be cleaned in the dishwasher and sanitized with the sanitizer of your choice. The MonsterMesh can be used alongside the MiniMesh to hold multiple additions. The MonsterMesh will sit on the neck of the carboy, and the MiniMesh can be inserted through the stopper hole in the lid. This way you can have two different infusions starting or stopping at different times.
$8.99
-
Metal Lid | 100mm Lug Finish
100 mm Metal Lid for Wide Mouth Jars. 100-2055 Lug Finish. Use with FE309 1-gallon jar. Single lid.
$0.99
-
Electronic Grain Scale - 55 lbs.
This is a great addition to the equipment arsenal of any homebrewer! Capable of weighing a full sack and then some, this scale will definitely ease your brew day. This is a benchtop unit with a 55lb capacity, lifetime warranty, and a host of helpful features. We have been using this to weigh grains out for recipes, and love the simplicity of the unit. Features: Massive 55 lb (25 kg) capacity! Optional Backlight Feature Runs on 4 x C batteries or AC adaptor (included) Large Weigh Platform 8" x 6.5" Weighs in Pounds, Pounds:Ounces, Kilograms, Grams, Ounces Dual Range Weigh Design: 0-2 lbs x 0.1oz, 0-1kg x 2g 2-55 lbs x 0.5oz, 1kg-25kg x 10g Display is removable and attached to two foot cord for easy viewing of the display while using larger weighing vessels
$59.99
-
Inkbird Digital Temperature Controller (WiFi Enabled)
The ITC-308 WiFi controller allows you to monitor your fermentation temperature from virtually anywhere with an internet connection. From the free companion app, available for iOS and Android devices, you can adjust settings, receive push notifications, and track daily activity. Please note the controller will only work with 2.4 GHz WiFi routers. The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing and wine making. Control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. The Inkbird controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control. Aside from fermentation uses, this is a great dual relay output temperature controller for cooking (use in a smoker or BBQ), home growing (heat mats for seedlings, climate control), or any other DIY project you come up with! Features: WiFi Enabled - requires 2.4 GHz router Free companion app available for iOS and Android devices Simple plug and play design with user friendly LED interface Dual stage ITC-308 - control both heating and cooling Adjustable Heating/Cooling differential 1000W max power Celsius or Fahrenheit High and low temperature and sensor fault alarms Can control temperatures of -58° F through 210° F (-50° C - 99° C) Body Dimensions: 5.5 in x 2.7 in x 1.3 in Power Cord - 4.5 ft. Temp Probe Cord - 6 ft.
$54.99
-
FerMonster 1 Gallon Ported Carboy With Spigot
Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind! These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.
$23.99
-
Stainless Steel Spoon - 21"
Perfect for stirring the mash or wort. Spoon is 21" in length.
$8.79
-
3.5 gal | Brew Bucket Mini Fermenter
Upgrade your home brewery with an innovative, Stainless Steel, 3.5 Gallon Brew Bucket™ Fermenter! Many have asked for a smaller BrewBucket, and that has been heard. The Brew Bucket mini is perfect for 2.5 gallon batches. With features similar to the original 7 gallon Brew Bucket, the Mini is a great way to do smaller batches. Whether you are interested in splitting a 5 gallon batch for experimenting, or just brew 2.5 gallons, the BrewBucket Mini is a great choice. Featuring a conical bottom, 304 SS construction, a rotating racking arm valve, and stackable design, these are space saving feature rich fermentors that are easy and enjoyable to use. We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer. The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking! Etched Volume Markers on the inside were super handy when filling. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid. The lid includes a removable, molded silicone gasket that ensures an airtight seal. We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move. Features: 304 SS Food Grade Construction Rotating Racking Arm & Valve (Patent Pending) 3.5 Gal Max Capacity (2.5 gal Batches) 40° Conical Bottom for Trub Trapping Nests for Storage & Stacks for Ferment! SS lid w/ Silicone Gasketed seal Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 8.5" Bottom Width / 11" Top Width x 16" Height Please note: the thermowell pictured in the second photo is not included.
$149.00
-
Glass Fermentation Jar | 1 Gallon | No Lid | 110mm Continuous Thread
Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 110 mm (4-3/8") wide opening is large enough to add product, and to reach your hand in for cleaning. Lids are not included, see our 110 mm plastic lid: JAR01A. 1 gallon widemouth jars are sold individually, and come packed 4 to a case. We suggest buying a case quantity of 4 to reduce the chance of breakage in transit.
$7.99
-
Brewmaster 5 Gallon Stainless Steel Kettle
This small 5 gallon kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it's available for a very affordable price. It is also perfect for the craft brewer who enjoys making several small batches instead of one large batch. This brew kettle is high quality 202 stainless steel. It features 0.5-mm thick sides and bottom, and riveted stainless steel handles. This 5 gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for extract brewing right in your own home! Features: 0.5mm thick stainless sides and bottom 10" H x 12.5" D Riveted handles on kettle body Kettle lid with riveted handle 5 gallon full capacity (3 gallons while boiling) Perfect size for partial boil extract brewing!
$32.99
-
Pop Cultures | PopTops™ Swing Top Bottles | Clear Glass Bottles | 16 oz | Case of 12
PopTops™ Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability. These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case QTY: 12 Pallet QTY: 112 cases Case of 12 x 16 oz Clear PopTops Bottles with Swing Tops. Crown Caps not included (see recommended items below for options).
$39.99
-
Pop Tops Swing Top Bottles - 16 oz Clear - 2 Cases of 12 (Qty 24) - FREE SHIPPING!!!
Pop Tops Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability. These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case of 12 x 16 oz Clear Pop Tops Bottles with Swing Tops. Crown Caps not included (see recommended items below for options).
$88.99
-
Glass Beverage Dispenser with Infuser | Stainless Spigot | 8L | 2.1 gal.
This glass beverage dispenser will look great on your counter or home bar, whether you're pouring lemon water, sun tea, kombucha, or pre-mixed cocktails. The infuser allows you to add citrus or other flavors to your beverage while keeping pulp and other solids out your glasses. Wide mouth lid for easy cleaning between uses. Features a stainless steel spigot that will stand up to corrosion no matter what beverage you're serving. In addition to dispensing beverages, this vessel works well for brewing kombucha thanks to the stainless steel spigot. The low pH of kombucha can cause early wear on plastic spigots, but not stainless. This makes a great option as a fermenter for the continuous brew method for kombucha making. Glass beverage dispenser Removable infusion chamber Stainless steel spigot 8 liters / 2.1 gallons Additional spigot styles can be found below
$37.99
-
Glass Fermentation Jar | 1 Gallon | No Lid | 100mm Lug Finish
Widemouth glass jars are great for fermenting small batches of fruit wines, beer, vinegars, lacto fermented foods, and more. The 100 mm (3.9") wide opening is large enough to add product, and to reach your hand in for cleaning. Lids are not included, see our 100 mm lug finish metal lids: FE309A. 1 gallon widemouth jars are sold individually, and come packed 4 to a case. We suggest buying a case quantity of 4 to reduce the chance of breakage in transit. Please note: the example image shows a unit with continuous threads. These jars have a lug finish.
$4.99
-
Speidel Plastic Fermenter | Rectangular HDPE Storage Tank | 60L | 15.9 gal
Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint and rectangular shape makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks. 22"L x 16"W x 22" H, 8.82 lbs FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
$142.99
-
Pop Cultures | PopTops™ Swing Top Bottles | Amber Glass Bottles | 16 oz | Case of 12
PopTops™ Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability. These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case of 12 x 16 oz Amber Pop Tops Bottles with Swing Tops. Crown Caps not included (see recommended items below for options). Case QTY: 12 Pallet QTY: 112 cases
$44.99
-
Pocket Thermometer - 1" Dial, 50F - 550F
Capable of reading from 50°F - 550°F degrees. Includes sleeve and is calibratable via a nut on the back of the dial.
$5.99
-
PopTops™ Swing Top Bottles - 16 oz Amber - 2 Cases of 12 (Qty 24) - FREE SHIPPING!!!
PopTops™ Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability. These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case of 12 x 16 oz Amber Pop Tops Bottles with Swing Tops. Crown Caps not included (see recommended items below for options).
$88.99
-
Speidel Plastic Fermenter | Round HDPE Storage Tank | 30L | 7.9 gal
Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and oversized 2-piece Speidel airlock. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks Suggested Applications: 12L: Perfect for storing small lots, making experimental batches and taking some of your beer or wine along with you to your next party. 20L: Ideal for secondary fermentation and storage of 5 gallon batches. 30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube. 60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy! 120L: Ferment & Store large batches of anything - your creativity is the only limit! Approximate Dimensions: 13.5in Diameter x 18.5in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F. FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).
$89.99
-
Kegmenter Fermentation Keg - 1 bbl
These stainless steel vessels are designed just like a keg but with a large 4" tri-clamp opening at the top and two 2" tri-clamps ports at the bottom. The large 4" opening at the top makes it easy to get inside the keg for cleaning, and the 2" ports at the bottom can be fitted with valves, heating elements, or other TC accessories and fittings. The kegmenter is well suited for use as a fermenter, brite tank, or top-up barrel. The 1 bbl Kegmeneter comes with end caps and clamps to plug the bottom ports, and a pre-drilled 4" cap for the top opening with a stopper and airlock included. You also have the option to use the Ball Lock Post lid with floating dip tube, which can be used for pressure fermentations or transfers. Also a 4" x 2" TC reducer would allow for adding a Reflux or Pot Still for distillation. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Specifications: Volume: 1 bbl (31 gal) Working Pressure: 3 bar (43.5 psi) Made from stainless steel 41" H x 15.5 Ø Kegland Part number: KL04541
$499.99
-
Brewmaster 8.5 Gallon Brew Kettle | Stainless Steel | Two Welded Couplers | Ball Valve Included | Silicone Handle Grips | Volume Markers
If you’re searching for a fully featured brew kettle but don't want to break the bank, the Brewmaster 8.5 Gallon Stainless Brew Kettle will certainly do the trick. Made of 100 percent stainless steel and available for a truly amazing price, this reliable brew kettle is perfect for first-time brewers and experienced home brewers alike. Two ½-inch couplers are welded to the side of the kettle, and the bottom coupler can even be threaded on the inside of the kettle to use with a diverter or a kettle tube screen. These kettles are upgraded with Silicone Grip Handles and Stamped volume markers on the inside, making brew day that much easier. Add an AG405 (domed false bottom) to this stainless brew kettle and you can even use it as a mash tun. Includes a ball valve and a threaded adpator to 3/8" barb for easily attaching transfer tubing. Also included is a thread 1/2" plug for the thermometer port. Thermometer is not included and can be added at any time. Features: 8.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 13.75" Tall x 13.75" Ø 1 mm thick walls Made from 201 Stainless Steel Approximate Internal Dimensions 13.75" tall 13.75" wide. This item does not work with induction burners A ball valve, nipple, and plug are included for the welded couplers. A thermometer, false bottom, or kettle screen can be added separately
$124.99
-
7 gal | Brew Bucket 2.0 | Ss Brewtech
The Brew Bucket was the first product and the origin of Ss Brewtech, and for many brewers, the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, Ss challenged their engineering team to pair some of the newest technologies with the original design. Brew Bucket Pure Flow Valve The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses Pure Flow technology, originally developed for the Ss line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, they have molded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0. Sanitary Connection The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into the Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer. Conical Base The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavors produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries. Full Width Lid The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches. Features Pro-Inspired Conical base Blow off port in lid for airlocks or blow off tubing Rotatable Silicone Racking Arm Pure Flow Valve for transfers and gravity samples 304 Stainless Steel 7 gallon capacity 300m Thermowell Thermometer | LCD Temp Display Module Dual Temp Wide lid with secure spring clamps Etched volume markings gals/liters Welded carry handles Surface safe Silicone Feet Specs: Tank Size: 7 gal Batch Size: 5 gal Dimensions: 24" H x 13" W x 13" D Weight: 11 lbs
$249.95
-
Square Cloth Fermenter Cover - 13.7 x 13.7 in.
These square cloths are perfect for Kombucha brewing. Let your fermenting SCOBY breathe while keeping bugs and airborne contaminants out. Perfect for large open top fermenters, such as Bucha Tanks.
$3.99
You have seen 48 out of 69 products