Detecting your location...

Siphoning Assemblies & Accessories

41 products

  • Bottle Filler with Removable Spring (3/8 in.)

    Bottle Filler with Removable Spring (3/8 in.)

    50 reviews

    What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 12 inches long. The plastic end fits nicely into our FE346 spigot, or it can be removed to attach 3/8" ID tubing.  

    $4.39

  • S/S Hose Clamp w/ Thumb Screw - Green - 3/4 inch S/S Hose Clamp w/ Thumb Screw - Green - 3/4 inch

    Butterfly Tubing Clamp (Medium) - Fits 3/4" OD Hose

    26 reviews

    Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.

    $1.89

  • S/S Hose Clamp w/ Thumb Screw - Blue - 1/2 inch S/S Hose Clamp w/ Thumb Screw - Blue - 1/2 inch

    Butterfly Tubing Clamp (Medium) - Fits 1/2" OD Hose

    11 reviews

    Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp!  Ideal for situations where you need to remove tubing from fittings to sanitize. Please note, as the reviews will also tell you, this is a clamp that will fit 1/2" OD tubing. If you are looking for a clamp for 1/2" ID (with 3/4" OD) choose the H955 clamp. 

    $1.74

  • Hose Clamp (Small) - 1/4 to 5/8 inch

    Hose Clamp | 1/4" to 5/8" OD Tubing Clamp | Stainless Steel

    24 reviews

    Stainless steel small hose clamp will fit hoses with 1/4" through 5/8" OD.

    $1.69

  • S/S Hose Clamp w/ Thumb Screw - Orange - 5/8 inch S/S Hose Clamp w/ Thumb Screw - Orange - 5/8 inch

    Butterfly Tubing Clamp - Fits 5/8" OD Hose

    10 reviews

    Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.

    $1.79

  • Sterile Siphon Starter - For 3, 5, 6, and 6.5 Gallon Carboy with smooth necks

    Sterile Siphon Starter - For 3, 5, 6, and 6.5 Gallon Carboy with smooth necks

    66 reviews

    The easiest way to start a siphon! Simply blow into the sterile filter, which slightly pressurizes the carboy, causing wine to flow out. This is hands down superior to the numerous other methods of starting a siphon (and we have tried them all!) No sucking the end of the tube, no plungers with faulty gaskets, no shaking, no filling up the tube with unsterilized water, nothing to break, no contamination, no disturbing the sediment, and no fuss. Can you tell we really like it! How to Use Attach the Sterile Siphon starter assembly by firmly pushing the orange or yellow carboy hood over the mouth of the carboy. Slide the racking cane to the desired depth, just about the sediment level and blow into the white, sanitary air filter for 2-3 seconds. Blowing through the filter forces wine out through the racking cane, starting the siphon. There is no need to worry about contamination from your mouth, as the sanitary filter removes 99.98% of airborne bacteria. For a video demonstration, check out the video below. Tip to Remove Oxygen in Line We suggest that as your starting the siphon you pinch the clear, flexible tubing near the racking cane. Release the pinch on the tubing after 1-2 seconds, while continuing to blow through for an additional second. This will cause the clear vinyl tubing to fill completely with wine, eliminating oxidation that can occur in siphoning when your line is not completely full and wine is mixing with oxygen. Special Tip for Additional Use of Sterile Siphon Starter while sanitizing carboys Fill your carboy with sanitizer as normal. Take the red tip off the end of the stainless racking cane and insert Siphon Starter assembly into carboy filled with sanitizer. Blow on filter to begin siphoning sanitizer out of carboy. As the sanitizer empties the carboy fills with filtered air, leaving a sanitized, bacteria free environment to fill your wine into. Sterile Siphon Includes: 26 inch Stainless Racking Cane Red Sediment Reduction Tip Rubber Carboy Blowoff Hood w/White Caps (Fits 3, 5, 6, 6.5 Gallon smooth neck glass carboys; see R552 if you have the more common Italian 6.5 gallon carboy with threads) 5' 3/8" ID Vinyl Tubing Stainless Hose Clamp Sterile Air Filter About the White Sterile Filter: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag. STORE DRY AT ALL TIMES. DO NOT SANITIZE FILTER.

  • Siphon Clamp - 3/8in.

    Siphon Clamp

    6 reviews

    For restricting flow on 3/8'' tubing. Color may vary.

    $0.99

  • Racking Cane Tip - 1/2 in Racking Cane Tip - 1/2 in

    Racking Cane Tip - 1/2"

    4 reviews

    Replacement tip for 1/2" racking cane. Comes standard on our R370.

    $1.69

  • Racking Cane With Tip (1/2 in. x 30 in.)

    Racking Cane - 1/2 in. x 30 in. (With Tip)

    3 reviews

    Racking canes are the most common tool used to transfer your homebrew from a carboy or other fermentation vessel to your bottling bucket or kegs.  This racking cane comes with a tip cover that will help to keep trub out of the bottling bucket or keg, leaving you with a clearer finished product! 1/2" OD 30" total length (including bend) 27" from tip to bend  

  • Racking Cane/Tube Screen

    Racking Cane Filter

    19 reviews

    A simple but effective screen that works very well when racking with whole hops, oak, or fruit in the fermenter. Simply slide this over the bottom of the racking cane and begin the siphon! Made from Stainless Steel mesh. Some customer are also using this in the their keg attached to the downtube.   Note - You may want to use a hose clamp to tighten this to the racking cane. Designed to fit over a 3/8" stainless steel racking cane.

  • Siphoning Set-Up (1/2 in. Stainless)

    Stainless Siphon Assembly (1/2")

    8 reviews

    26" x 1/2" OD stainless racking cane, 5 feet of tubing, racking clip and a hose clamp. Perfect for siphoning wine from one glass container to another glass container.  Great for carboys and demi-johns. 

  • Racking Cane Clip (1/2 in.)

    Racking Cane Clip (1/2'')

    6 reviews

    Holds 1/2'' racking cane and clips to carboy or bucket. Great for holding the siphon off the bottom when starting your transfer. Then you can slowly lower the bottom of the siphon cane to the bottom of the carboy/bucket by sliding the cane in the clip to help eliminate disturbing the bottom sediment layer. A must have.

    $5.49

  • Sanitary Filter Sanitary Filter

    Sanitary Filter

    49 reviews

    An inline sanitary filter that filters down to .027 micron with a 99.99% efficiency. Use it anywhere you need to keep something sanitary. Both 1/4" and 3/8" tubing will attach and it will snugly fit in any standard stopper as well. Check out this list of suggested uses: Airlock: The most common use might be as an airlock on any kind of fermenter. Unlike other small sanitary filters, this unit fits perfectly into a stopper. Works great for conical fermenters, like the Fermentap and our own Stainless Conicals, where displacement air is taken in when samples are taken or trub is dumped. Using the sanitary filter as airlock also eliminates the concern of drawing air back in as hot liquid cools and contracts in a fermenter. Not appropriate for long term storage of beer or wine as it is not an oxygen barrier. Inline Aeration/Oxygenation Filter: With an oxygenation or aeration sytem, such as our FE375 or FE380, it will filter contaminants out of oxygen or air. It is connected inline between pump/O2 tank and s/s diffusion stone. Hand Pumps: Some breweries use this filter with the breweries hand pump system. Air going back into the cask is sanitized through this filter. This has extended shelf life of Real Ales by up to 2 weeks! CO2 Filtration: Used inline with your CO2 Kegging setup, this piece can be used to filter out any potential contaminants from your CO2 Tank. Storage: Store in Ziplock bag in a dry place with minimal moisture exposure. Can last up to 1 year. Discard if there are any signs of discoloration. About the inline filters: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't try and sanitize it by dunking it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag. This product qualifies as a HEPA filter under US government standards. STORE DRY AT ALL TIMES. DO NOT SANITIZE FILTER. **NOTE: Temporarily shipping a smaller diameter unit due to supply chain issues**

    $5.49

  • Racking Cane With Tip (3/8 in. x 30 in.)

    Racking Cane - 3/8 in. x 30 in. (With Tip)

    3 reviews

    Clear plastic racking cane with curve. Good for 6.5 gallon carboys. 3/8" diameter is the standard size for filling beer bottles. 3/8" OD 30" total length (including bend) 27" from tip to bend  

    $8.99

  • Racking Cane Clip (3/8 in.)

    Racking Cane Clip (3/8'')

    3 reviews

    Holds 3/8'' racking cane and clips to carboy or bucket. Great for holding the siphon off the bottom when starting your transfer. Then you can slowly lower the bottom of the siphon cane to the bottom of the carboy/bucket by sliding the cane in the clip to help eliminate disturbing the bottom sediment layer. A must have.

    $4.39

  • Easy Jiggler - Stainless Steel Auto Siphon Racking Cane Easy Jiggler - Stainless Steel Auto Siphon Racking Cane

    Easy Jiggler - Stainless Auto Siphon Racking Cane

    32 reviews

    This jiggle siphon is made entirely of stainless steel and includes silicone tubing. Polycarbonate auto siphons are made from multiple pieces that easily crack and break after heavy use or if they're accidentally dropped on the floor. The stainless steel Easy Jiggler will last a lifetime and can be quickly disassembled for cleaning and sanitizing. The perfect option for siphoning out of carboys, FermZillas, Demijohns or other open top fermenters. To use, simply insert the tip of the jiggler into the liquid you're transferring and give it a few long steady strokes to begin the siphon. 22.5" long Made from 304 stainless steel Includes 60" length of 10mm ID silicone tubing Kegland Part Number: KL14021  

    $36.49

  • Racking Cane Tip - 3/8 in Racking Cane Tip - 3/8 in

    Plastic Racking Cane Tip - 3/8"

    9 reviews

    Replacement tip for 3/8" racking cane. Comes standard on our R340, R360 and R375.

    $1.39

  • Hose Clamp - Fits 3/8" to 7/8" OD Tubing

    Hose Clamp | 3/8" to 7/8" OD Tubing Clamp | Stainless Steel

    11 reviews

    Stainless steel hose clamp will fit 3/8" to 7/8" Tubing.

    $1.79

  • Plastic Ball Valve (3/8 in)

    Plastic Ball Valve (3/8")

    5 reviews

    An inline plastic valve with 3/8" barbed inlet and outlet. Not designed to work with hot liquids or situations involving pressure (use a brass or stainless ball valve in those situations.)

    $3.29

  • Auto-Siphon Starter - Mini 5/16 in. Auto-Siphon Starter - Mini 5/16 in.

    Auto Siphon Starter - Mini 5/16 in.

    4 reviews

    Perfect size for siphoning or bottling from a gallon jug.  Takes 5/16" tubing (see YMAN section below). Instructions: Sanitize and rinse your Auto Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Auto Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out the inner tube and sanitize your Auto Siphon for storage. Our standard 1/2" racking cane tips will work with this product, see our You Might Also Need section below for product information.

    $14.49

  • Auto-Siphon Starter - 5/16 in Regular Auto-Siphon Starter - 5/16 in Regular

    Auto Siphon Starter - 5/16 in Regular

    5 reviews

    Siphon starter for transferring liquids and bottling. Very easy to use and sanitize. A single stroke starts the siphon without disturbing the sediment. Precision designed for smooth, leak-free operation. The Regular Auto Siphon is recommended for use with standard buckets and carboys. We strongly recommend you use 5/16 in ID tubing (not 3/8 in) to prevent air leaks from stopping the siphon. Outer diameter of the siphon shaft is 7/8 inches.

    $16.49

  • The Easy Siphon - 1/2 in. - 2022 Model The Easy Siphon - 1/2 in. - 2022 Model

    The Easy Siphon - 1/2 in.

    56 reviews

    For siphoning out of a carboy or bucket. Comes with 1/2" cane. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. 24" racking tube. Instructions: Sanitize and rinse your Easy-Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Easy-Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up about 7" until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out inner tube and sanitize Easy-Siphon for storage.

    $16.99

  • The Easy Siphon - 3/8 in. - 2022 Model The Easy Siphon - 3/8 in. - 2022 Model

    The Easy Siphon - 3/8 in.

    63 reviews

    For siphoning out of a carboy or bucket. Comes with 3/8" cane. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. 24" racking tube. Instructions: Sanitize and rinse your Easy-Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Easy-Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up about 7" until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out inner tube and sanitize Easy-Siphon for storage.

    $13.99

  • Siphoning Set Up (1/2 in.)

    Siphon Assembly (1/2'')

    6 reviews

    30'' x 1/2" OD acrylic racking cane, 5' hose, racking clip, hose clamp. Used to siphon beer or wine from carboy to carboy.  

Siphon assemblies work using gravity and rely on the fact that liquid always flows downward to the lowest point. In order to use a siphon, the vessel you are siphoning from needs to be positioned above the vessel you are racking into. Here are a few recommendations to help make your siphoning experience a positive and productive one:

  • Sanitize everything that will come into contact with the wine! Before using your siphon set-up, make sure to sanitize the entire assembly (MoreWine! recommends using StarSan or SaniClean, but a traditional acidulated SO2 solution will work as well).
  • If you need to move the vessel you are racking, we recommend moving it 1-2 days before doing the transfer. This will allow any lees that get churned up into the wine when the vessel got moved to settle out again.
  • If you are new to siphoning, practice your technique using water before trying it out on your wine!

Login

Forgot your password?

Don't have an account yet?
Create account