Products

Full Coupler with 3/8" Female BSPP Thread. Full couplers have threads for insertion from both sides. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06484  

Read more less

Gas Manifold - Pressure Relief Valve 1/4" Male Threading Set to blow off at 20 psi.

Read more less

Stainless pressure relief valve. Rated to 1 BAR / 15 psi. Non-threaded. For welding in place only.

Read more less

Half Coupler with 1/2" Female Pipe Thread. Half couplers have thread for insertion from one side only. 304 stainless. Weld into place. You will need to punch a 7/8" hole to install.

Read more less

Stainless Half Coupler with 1" Female Pipe Thread. Half couplers have thread for insertion from one side only.

Read more less

An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/2" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06453

Read more less

An excellent upgrade to a standard nipple, These have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! Max pressure rating of 150 psi.  

Read more less

An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/4" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06439  

Read more less

An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 1/8" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06422  

Read more less

An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 3/4" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06460  

Read more less

An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 3/8" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06446  

Read more less

1/4" NPT hex nut made from stainless steel.  

Read more less

Upgrade your Braumeister with this Stainless Steel Hood!  Combined with the Insulating Jacket, these pieces will improve the boil of your brau, both getting you to temp faster, and making the boil more vigorous. Compatible with all generations of Braumeister, made before or after 2015.

Read more less

Made for dry hopping in kegs, the hop bomb is made from 304 stainless steel. The hop bomb fits up to 1 ounce of pellet hops allowing the hops to have enough space to move around for better extraction. The included chain allows it to be suspended from keg lids with internal hooks. See recommended items below for our KEG448 if you need a lid with hook.  Note: Regular tea infuser balls do not include a stainless steel chain and will rust if you used in your beer.     Kegland Part Number: KL05203  

Read more less

Keep your hops in the kettle and out of the fermenter with this hop filter basket. Conveniently hangs inside the boil kettle and can be removed at any time if needed. The adjustable hook is great for positioning the filter based on the size of your kettle and the volume of wort you're boiling. When fully extended, you can lower the basket an extra 9 inches into the kettle. Also works great as a secondary filter when transferring sweet wort from a mash tun to the kettle. Made from 304 stainless steel Adjustable hanging hook 14" H x 6" Ø  

Read more less

Made from 304 stainless steel, the hop tube is ideal for addling larger amounts of hop pellets, flowers or spices to your BrewZilla without blocking the pump. It can also be used in your boil kettle, corny keg, Kegmenter, or FermZilla. The fine mesh will prevent large particles from blocking bev out dip tubes, pumps, or chillers. It will hold approximately 5 oz of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. The stainless steel chain makes it perfect for use with our Corny Keg Lid With Welded Tab. 2.6" diameter 11.8" tall Made from 304 stainless steel Kegland Part Number: KL05210  

Read more less

This completely stainless, inline oxygenation system injects oxygen into your wort as it travels from your wort chiller to fermenter and allows you to read the temperature coming out of your wort chiller at the same time. It has a 3" Dial Stainless thermometer and a 2 micron diffusion stone. The inlets and outlets are 1/2" barb. The oxygen inlet is 3/8". It is the economical alternative to our completely sanitary, stainless oxygen system, PRO30.   How long should I apply oxygen while transferring to the fermenter? — We recommend you transfer half of your wort to your fermenter before applying inline oxygen (O2) to your wort transfer.  If you apply O2 the whole time while transferring you are wasting O2.  

Read more less

Our FE390A is just like the FE390, except we took off the barbs and left the fittings up to you. So many of our customers wanted this option, we decided to make it a kit and allow other people to get creative! Works well with our polysuphone QD's. The unit features a stainless thermometer, stainless tee, and a stainless oxygenation stone. The barb on the stone is 3/8". How long should I apply oxygen while transferring to the fermenter?  —  We recommend you transfer half of your wort to your fermenter before applying inline oxygen (O2) to your wort transfer. If you apply O2 the whole time while transferring you are wasting O2.

Read more less

Female threaded pipe socket with 1/2" BSP threads.  

Read more less

Stainless Lock Nut. 1/4 in. Female BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06507  

Read more less

Stainless Lock Nut. 3/4 in. Female BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06538

Read more less

Stainless Lock Nut. 3/8 in. Female BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06514  

Read more less

Stainless Steel Straight External Threaded Pipe Nipple 1/2 in. BSP. This is often used to join two female BSP or NPT fittings. As it has a parallel thread (BSPP) it is perfect for attaching stainless ball valves to pots and stuff like that too. If you want to install this onto a pot you just need to drill a hole that is about 20.5mm diameter. KegLand Part Number: KL03667  

Read more less