Beer Making
-
Replacement Reservoir for Tri-Clamp Spunding Valve
Replacement reservoir for 1.5" tri-clamp spunding valve. Compatible with both 1 BAR BrewBuilt model (CON4P36) and 2 BAR MB model (CON4P35-MB).
$18.99
-
Extended Malt Pipe for Boiler Extension | BrewZilla | DigiBoil | 35L | 9.25G
For use with the 35L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 35L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 35L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps. You will also need the Ricirculation Arm Extension to continue using the BrewZilla's recirculation arm. Compatible with Gen 3 / Gen 4 BrewZillas. KegLand Part Number: KL26468
$82.99
-
Extended Malt Pipe for Boiler Extension | BrewZilla | DigiBoil | 65L | 17.1G
For use with the 65L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 65L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 65L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps. You will also need the Ricirculation Arm Extension to continue using the BrewZilla's recirculation arm. Compatible with 65L Gen 3 / Gen 4 BrewZillas. Example image of the 35L model shown here. KegLand Part Number: KL32834
$87.99
-
BrewZilla Replacement Malt Pipe | Gen 4 | 35L
Replacment malt pipe for the 35L BrewZilla Gen 4. This unit is not suitable for older generation BrewZillas or DigiBoils. KegLand Part Number: KL32773 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos.
$82.99
-
BrewZilla Replacement Malt Pipe | Gen 4 | 65L
Replacment malt pipe for the 65L BrewZilla Gen 4. This unit is not suitable for older generation BrewZillas or DigiBoils. KegLand Part Number: KL32797 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos.
$98.99
-
BrewZilla All Grain Brewing System | Gen 4.1 | Integrated Pump | Includes Wort Chiller | WiFi | Bluetooth | RAPT | 35L | 9.25G | 220V
Elevate your brewing game with the 220V Gen 4 BrewZilla. This cutting-edge system combines more power with innovative features like wireless connectivity via WiFi & Bluetooth, allowing you to heat faster while you control and monitor your brew day, ensuring precision, convenience, and exceptional beer batch after batch! WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain — get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don’t overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt Pipe With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We’ve been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it’s also offered at an incredibly competitive price point when compared to other systems. You’ll get all of the cutting edge Bluetooth technology you’d get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that’s yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you’ll need to spend another $100 for the recirculation pump kit. What’s more, no other system in the same ‘weight class’ has the same grain capacity. And if the standard capacity isn’t quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you’re investing in a top shelf system and all of the critical features you’re expecting will be included. Perfect for Distillation If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.1 Stainless steel construction 9 gallon total capacity with a finished beer output of 5-6 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 220-240V power NEMA 6-30P plug Requires NEMA 6-30R receptacle Requires 11 amps from 30 amp circuit Dual heating elements (1900 watts and 500 watts) Stainless steel 1/2" ball valve for gravity draining or transferring via pump Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 32.75" H (with recirculation arm) x 12.5" D Recommended max. grain bill: 23.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 2.9–3.1 gal/min Max Head: 4.9–6.8 ft. Poles: 2 Voltage: 220–240V-AC Frequency: 50–60Hz Power: 6 watts Current: 60 mA Speed: 2600–3000rpm Duty Cycle: Continuous Capacitor: 2µF Input/Output: 13mm barb Water Resistance: IPX2 You Will Need: 2' of H985 1/2" ID Silicone tubing for sparging and draining. To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950hose clamps and (1) brass hose by thread adaptor (H508). These items come in the Wort Chiller Connection Kit, add the kit to your cart and use code ZILLAKIT at checkout. KegLand Part Number: KL27434 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use. 35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge RAPT Gen 4 BrewZilla | User Manual
$599.99
-
Duotight Push-In Fitting | Reducer Elbow | 8 mm (5/16") x 6.35 mm (1/4") Screw Lock
This Duotight elbow is mainly used where a stronger connection is required on a rigid port. One side is a standard 8 mm Duotight connection and the other side is a compression adapted Duotight Screw Lock connection for 6.35 mm (1/4") rigid fittings. This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part number: KL24624
$3.69
-
Grainfather G70² | All Grain Brewing System | G70 V2 | Wireless Connectivity | 220V
PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. Thanks to the 70L (18.5 gal) capacity, homebrewers can produce more beer to share or commercial breweries now have a unit that's small enough for pilot testing. It also has a smart controller with built-in wireless connectivity and mobile app integration for step-by-step remote-controlled brewing. The G70² gives you everything you need in one compact package that can be used virtually anywhere. Please Note - this system comes standard with a NEMA 6-15P plug, and requires access to a 220v-240v power supply. New Features on the G70²: The G70² features a perforated grain basket and the sight glass is now integrated into the recirculation pipework. The new basket design provides an improved brewing experience with no top plate or additional pipework required, making for an even more efficient mash and an easier clean. Perforated grain basket for an improved brewing experience with no top plate or additional pipework required. Integrated sight glass is now a part of the recirculation pipework for easy volume reading. 70L of innovation, consistency and power have helped to create one of our most compelling systems to date. The inherent strength and safety capabilities of the G70² are matched by its bold, contemporary look and new smart brewing technologies. From the creators of the original award-winning all-grain brewing system, the Grainfather G70² represents the next level in brewing equipment. We’ve stepped up our game to bring you a smarter brewing system with a larger 18.5 gal capacity, improved design, wireless control, app integration and the same Grainfather signature quality guarantee. Whether you're a homebrewer looking to raise the stakes or a commercial brewery looking to bring authenticity back to your pilot batches, the G70² is your true brewing companion. It gives you everything you need in one compact package that can be used virtually anywhere. Features: Two-stage false bottom. The conical base allows a false bottom with an inner collar to sit in the recess of the base. Early testers used 21 oz of hops and saw full flow through the pump. This is very effective. Bespoke 3.2 kWh concealed conical heating element. Make the most of the power available. The element covers around 80% of the base and is mounted using a thermal paste rather than braised. This moves the heat efficiently upwards, minimizing the loss of heat to areas where it’s not needed. As it’s spread in a wide area, hot spots and scorching are very unlikely. Also, most solids settle on the false bottom, so they won’t touch the elements. As it’s concealed, it makes cleaning easy too. Integrated sight glass for easy volume readings during sparging. Instead of trying to judge the level of your preboil, you can easily sparge until you reach preboil volume. It’s also easy to clean after every brew. The sight glass cap can be replaced with the sight glass cleaning barb to easily recirculate a cleaning solution. Bottom drain below the false bottom means minimal dead space. High temperature, high flow rate, food-grade pump. With an 2.1 gal per minute flow rate, you can transfer your brew efficiently and safely. Heavy duty handles on the outside of the G70² unit. Convenient side entry recirculation. Rather than up and over, the G70² has a built in port on the side of the unit. If the pump is accidentally switched on, the wort will be safely directed back into the boiler. New rolled edge, mash plates and hop filter for increased strength and easy set up. There’s no more silicone seals, as the plates now have a smooth finish, making them more robust, hard-wearing and easy to install. Compared to the G30, the G70² is wider but not that much taller. Comparatively, the draining is still quick from the basket and there’s less likelihood of stuck sparges as the draining surface area is bigger. Safety aspects including locked in support ring, heavy duty, no slip brackets on the grain basket and protection from knocking the ball valve open. Automatic heat sensors and safety cut-out for dry boil protection. Color LCD controller screen with magnetic mounting for easy viewing from all angles and manual control. Glass lid with handle. Ball valve for sampling/draining. This runs in line with the pump so it’s particularly helpful when draining the cleaning water. The water runs out quickly, emptying the unit in no time. Huge Wort Chiller included. Despite the volume being more than double, cooling times remain around the same as the G30 thanks to a more powerful pump, efficient false bottom and bigger wort chiller to match the wider unit. The large size means it needs to be positioned away from the G70², however this is made easy with longer silicone tubing attached as standard. Lifting bar included with winch lifting hook. Use the bar for a two person lift or with a stable winch system for individual brewers to lift the grain basket. Large dual-stage hop filter provides a large surface area to allow for a hopping rate of up to 3.3 lbs, which also reduces pump load and blockages. Robust stainless steel body and excellent build quality. Specifications: 304 Grade stainless steel body 220 - 240V 18 Gal Capacity Max Grain Bill: 35 lbs Min Grain Bill: 18 lbs Powerful high flow pump: 15W
$2,199.00
-
White Labs Yeast | WLP644 Saccharomyces "Bruxellensis" Trois | Beer Yeast | PurePitch® Next Generation | Industry Leading Viability | 150 Billion Cells
This Belgian strain, traditionally used for wild yeast fermentations, produces a slightly tart beer with delicate mango and pineapple characteristics. This wild yeast has grown in popularity for styles like American IPA, American pale and blonde ales due to its tropical and stone fruit flavors and aromas. This Saccharomyces strain can be used like other house strains and can be easily cleaned with proper CIP procedures. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Attenuation: 70-85% Flocculation: Low Alcohol Tolerance: 10-15% ABV Optimum Fermentation Temp: 70-85°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$14.99
-
Glycol Chiller | 3/8hp | Ss BrewTech
Introducing the Ss Glycol Chiller 3/8 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this set up offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery. Features: Pumps not included, attach up to 6 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 4 - 1 BBL Chronicals, Unitanks or Brite Tanks Chills Up to 6 - 1/2 BBL, 14, or 7 gal Chronicals or Unitanks, 10 or 20 gal Brite Tanks Chills up to 6 - 14 or 7 gal Brew Buckets Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 3/8 HP Compressor 3576 BTUs/Hr 10 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters included Made in France Dimensions: 18" W x 18" D x 28" H
$1,499.00
-
Glycol Chiller | 1/5hp | Ss BrewTech
The Ss Glycol Chiller | 1/5 HP, will maintain lager temps and enable crash cooling for up to 3 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this setup offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery. Features: Pumps not included, attach up to 3 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 2 - 1/2 bbl, 14 gal Chronicals, Unitanks, or Brew Buckets Chills Up to 3 - 7 gal Chronicals, Unitanks, or 10 gal Brite Tanks Chills Up to 3 - 7 or 3.5 gal Brew Buckets Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 1/5 HP Compressor 1450 BTUs/Hr 4.75 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters Included Made in France Dimensions: 14" W x 11" D x 27.5" H
$999.00
-
Cold Brew Bucket Kit | Ss BrewTech
An elegant combination of 304 stainless steel and non-slip silicone come together for the coffee industry's most complete commercial-grade cold brew system. What's Included: Cold Brew Bucket Lid Stainless Cold Brew Basket w/ Silicone Handle Silicone Lid Deep Bend Pick-Up Tube 10x - High Strength Filter Bags Specs: Designed for 7 gal vessel volume 5 lb. max coffee grounds 3.5 gal max coffee concentrate output Designed to pair with our iconic series of 7 gal | Brew Buckets. The system will also work with the 7 gal | Chronical series.
$149.95
-
Essential Kit | Brew Bucket | Ss BrewTech
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with the purchase of a Brew Bucket Series. Hose Barb | ½” 90° for Blow-Off Tubing | ½” ID Silicone (2ft) Tubing | ⅜” ID Silicone (5ft) Hose Clamps (2)
$41.95
-
Essential Kit | Chronical 2.0 | Ss BrewTech
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with the purchase of a Chronical 2.0. Also works with legacy Chronical Brew Master Edition Kit Includes: Hose Barb | 1/2" to 1.5" TC Hose Barb | 1" to 1.5" TC Clamp | 1.5" TC clamp (2) Gasket | 1.5" TC gasket (3) Tubing | 1" ID Silicone (2ft) Tubing | ½” ID Silicone (10ft) Hose Clamps (2)
$95.95
-
Essential Kit | Unitank | Ss BrewTech
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with your purchase of a Unitank or Unitank 2.0. Kit Includes: Hose Barb | 1/2" to 1.5" TC Hose Barb | 1" to 1.5" TC Hose Barb | 1/2" Barb to 1/2" MPT Clamp | 1.5" TC clamp (2) Gasket | 1.5" TC gasket (3) Tubing | 1" ID Silicone (2ft) Tubing | ½” ID Silicone (7ft) Hose Clamps (2) Compatible with Unitank 2.0, Unitank, Nano Jacketed Unitank
$95.95
-
Essential Kit | T.C. Kettles | Ss BrewTech
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with your purchase a TC Kettle. Designed to work perfectly with TC Ss Kettle including the Brewmaster Editions. Kit Includes: Thermometer | 1.5" TC Hose Barb | 1/2" Barb to 1/2" MPT Tubing | ½” ID Silicone (5ft) Hose Clamps (2)
$58.95
-
Essential Kit | InfuSsion Mash Tun | Ss BrewTech
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with your purchase of an InfuSsion Mash Tun. TC Kit Includes: Hose Barb | 1/2" Barb to 1.5"TC Tubing | ½” ID Silicone (5ft) 1.5" TC Clamp Hose Clamps (2)
$36.95
-
Essential Kit | Pump | Ss BrewTech
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with your purchase of a pump. TC PUMP KIT: TC Ball Valve Hose Barb | 1/2" to 1.5" TC Hose Barb | 1/2" Barb to 1/2" MPT Clamp | 1.5" TC clamp (2) Gasket | 1.5" TC gasket (3) Tubing | ½” ID Silicone (10ft) Hose Clamps (2) THREADED PUMP KIT: 1/2" Threaded Ball Valve Hose Barb | 1/2" Barb to 1/2" MPT Hose Barb | 1/2" to 1/2" FPT Tubing | ½” ID Silicone (10ft)
$83.95
-
Whirlpool | 1.5 in. T.C. to 90° Barb | Ss BrewTech
Whirlpool attachment design to be used with an external valve or valve tree like that available for Brew Cubes.
$29.95
-
Bulkhead | 3/4 in. T.C. Mash Tun Bulkhead | Ss BrewTech
Replacement component for current generation InfusSion Mash Tun. Can be used to convert the older generation Mash Tuns to 3/4" TC.
$29.95
-
Whirlpool | 1.5 in. TC | Ss BrewTech
Designed to be used as a whirlpool solution in TC Brew Kettles (including the eKettle). 1/2" NPT to 1.5" TC 3 Piece Ball Valve 1/2" ID Valve Body Integrated Whirlpool Nozzle Compatible with Ss TC Brew Kettle and eKettles 304 Stainless Steel Does not include TC Clamp or Gasket Not intended for use with Ss Brew Kettle Brew Master Edition.
$47.95
-
Essential Kit | RIMS | Ss BrewTech
The Essential Kits are designed to get you up and brewing with one click. It's highly recommended you add this to your cart with your purchase of a RIMS. Sight Glass | 2.25" Hose Barb | 1/2" to 1.5" TC (2) Clamp | 1.5" TC clamp (3) Gasket | 1.5" TC gasket (3) Tubing | ½” ID Silicone (5ft) Hose Clamps (2)
$119.95
-
Replacement Top Cap for Matte Black Tower | 4 Tap Tower
Replacement Top Cap for quad tap Matte Black Tower. Direct replacment for the KOMOS Matte Black 4-Tap Draft Tower.
$20.99
-
Replacement Top Cap for Matte Black Tower | 1-3 Tap Tower
Replacement Top Cap for 1-3 tap Matte Black Tower. Direct replacment for the KOMOS Matte Black Draft Tower.
$10.99
-
Brew Cube | Ss Grain Mill Cart | Ss BrewTech
Design specially for the Ss Grain Mill. The top plate has precision machined mounting holes as well as a grain chute port. The removable bottom plate is designed to easily align a standard five-gallon bucket commonly used in grain transfer for home and nano breweries. Ss Grain Mill NOT included 304 stainless steel Approximately 20" x 20" x 17" Only compatible with the updated HD Casters. Not compatible with Standard length Casters.
$224.95
-
Brew Cube | eController Mount or Side Shelf | Ss BrewTech
Designed to mount an eController to a Brew Cube. Additionally, the Side Shelf which measures 270mm x 270mm can be use to hold a RIMS or other accessory. Please select your controller size as the mounting plates are different widths. *3V Mount shown in photo
$74.95
-
Brew Cube | Pump Mount Plate Kit | Ss BrewTech
Designed to mount a pump to Brew Cube | Perforated Shelves. The plate is designed with two pump mounting patterns: 66.68mm x 60.20mm | Fits Chugger Pump and other home brew pumps 93.41mm x 71.91mm | Fits Chugger Max Pump
$44.95
-
Brew Cube | Valve Tree Manifold | Ss BrewTech
Valve Tree kit designed for Brew Cubes. Includes: Valve Tree (4) Pure Flow Valves (12 PSI Max) Brew Cube to tree clamp mount Perforated base plate (9) 1.5" TC clamps (1) 1.5" TC gasket Needed for completion: Pump Tubing and hose barbs to connect pump to valve tree, and valve tree to vessels.
$249.95
-
Brew Cube | Leg Connection Kit | Ss BrewTech
Designed to be used to connect two brew cubes of different heights together. For two cubes of equal height simply use the Brew Cube | Connection Bolts.
$34.95
-
Brew Cube | Hose Hanger | Ss BrewTech
The Brew Cube | Hose Hanger is designed to be mounted to the side of a Brew Cube and used to hang hoses and other accessories from the Brew Cube. Includes mounting hardware. The Garden Hose Hanger can be used to coil up a garden-style hose for easy brew day access. The U-Hook Hose Hanger can be used to rest accessories like tubing, mash paddles, and gloves.
$9.95
-
Brew Cube | Connection Bolts | Ss BrewTech
Pack of six bolts to connect two brew cubes together.
$9.99
-
Brew Cube | Wall Hooks | Ss BrewTech
5 pack of hooks designed for the Brew Cube | Peg Wall
$9.95
-
Brew Cube | Leg Extensions | Ss BrewTech
Leg extensions to add 12" of height to a Brew Cube. Can be paired with Brew Cube | Shelf
$69.95
-
Brew Cube | Peg Wall | Ss BrewTech
Pegboard Tool wall designed to be mounted to the side of a Brew Cube. Available in 12" and 24". NOTE: The 24" version is designed to be used with leg extensions.
$74.95
-
Brew Cube | Shelf | Ss BrewTech
Designed to fit in between legs or between feet (or casters) as a shelf on Brew Cubes. Perforated Shelf can be used to mount pumps and accessories. *Note these will not work as top plates.
$49.95
-
Brew Cube | Ss BrewTech
The Brew Cubes started as a side project for the Engineering team. We wanted a modular system for testing and prototyping. The Brew Cubes gained popularity internally, and we decided we had to make them available to homebrewers. 19.75" x 19.75" x 17" Modular Design The Brew Cubes started as a side project for the engineering team. We needed a modular system for testing and prototyping a variety of homebrew equipment configurations without fabricating custom brew stands for each build. They quickly gained popularity internally for their modularity and flexibility. The Brew Cubes are designed to grow alongside the brewer's equipment needs and skill level; there's really no right or wrong way to build a brewery, and that's where the modular design of the Brew Cubes shines. The core of the Brew Cube is the base kit, as shown in the exploded view. From there, any variety of shelves and accessories can be added on. We'll have many of the core accessories available immediately, but we view this as a long term platform and intend to introduce thoughtful additions to the product line over the coming months and years. Unlimited Flexibility From stands and carts to parts racks and shelves, flexibility is at the heart of the Brew Cube's design. Every brewer and brewery has different needs, that's why there's no right or wrong way to use Brew Cubes. Designed to bolt together, it's easy to string three or more cubes next to each other, or add optional shelving, leg extensions, and peg walls for near-endless customization. Pro Inspiration for the Home Brewer When designing the perfect homebrew rig, we took inspiration from some of the best and most sought after pro features our team has been engineering into our larger brewhouses. From the dual pump architecture to the newly patented valve tree, Brew Cubes can unlock the full potential of your Ss Brewtech equipment. 3V eBrewing setup shown in example photo: (3) Brew Cubes (2) Brew Cube | Connection Bolts Brew Cube | Valve Tree 3V eController with Brew Cube eController Mount (2) eKettles InfuSsion Mash Tun RIMS (2) TC Pumps Various hose barbs, valves, silicone tubing, and fittings
$199.95
-
FTSs Touch | Extension Cable | Ss BrewTech
Designed for situations where your FTSs Touch and fermenter are more than 3ft away from your power supply. Can be used to extend the pump and/or power cable.
$16.95
-
FTSs Touch | XT30 to Barrel Adaptor | Ss BrewTech
Designed to allow the use of older FTSs pumps and heaters with new FTSs Touch controller.
$12.95
-
Replacement Boiler False Bottom | Pump Filter | BrewZilla Gen 4 | 35L
Replacement false bottom for the 35L Gen 4 BrewZilla. Includes eye bolt pull-ring assembly. Not compatible with older models of BrewZilla or the DigiBoil. KegLand Part Number: KL27304
$43.99
-
KOMOS® | Keg Coupler Check Ball Lifter | 5-Pack
This handy tool is inserted into the bottom of your keg coupler to lift the ball check valve, allowing you to flush cleaning solution through from the tap without needing to disassemble the keg coupler. A simple solution to save you time while cleaning draft lines. Comes in a convenient zip lock bag.
$11.99
-
White Labs Yeast | WLP653 Brettanomyces Lambicus | Beer Yeast | PurePitch® Next Generation | Industry Leading Viability | 150 Billion Cells
This yeast produces a high intensity of the traditional Brettanomyces characters in beer, such as horsey, smoky and spicy flavors. As the name suggests, this strain is found most often in lambic style beers but is also commonly found in Flanders and sour brown ales. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Attenuation: N/A Flocculation: Low Alcohol Tolerance: 8-12% ABV Optimum Fermentation Temp: 85°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$14.99
-
FTSs Touch | Nano Jacketed Tank Kit | Ss BrewTech
The FTSs Touch | Nano Jacketed Tank Upgrade kit has been designed to leverage components from our home brewing FTSs Touch line in an effort to provide a low-cost solution to pair a 1, 2, or 3.5 BBL Nano Jacketed Unitank and Nano Jacketed Brite Tanks with one of our 3/8 HP or 3/4 HP glycol chillers. This system features a custom TC thermowell adapter, along with a silicone insert to adapt the temperature probe from an FTSs Touch controller to the welded-in sleeved thermowell port on our line of Nano Jacketed Tanks. In addition, a custom-designed low-pressure open silicone check valve is included to prevent backflow to the chiller's reservoir when glycol is not flowing. The kit includes 1/2" NPT to 3/8" barbs to adapt the glycol ports for use with our standard FTSs Touch pump. Since most Nano Jacketed Tanks are set up for use with a pressurized loop glycol system typically found in commercial breweries, this kit offers a Nano brewery an affordable, easy-to-setup alternative to more elaborate or expensive installations. Everything is included to interface a single Nano Jacketed Tank between an FTSs Touch and Ss Glycol Chiller. Cooling options for Ss Branded Glycol Chillers FTSs Touch | Jacketed Tank Kit — Designed to be paired with our line of Ss Glycol Chillers. Cooling options for Pressurized Glycol Loops on Commercial Chillers FTSs Pro Touch (+ FTSs Pro Touch Solenoid Valve) — Designed to be paired with pressurized-loop (Non-Ss Brewtech) commercial glycol systems. Not recommended for 5bbl & Larger Tanks Includes: (4) FTSs hose clamp for 3/8" barbs (1) Hose barb - 3/8" to 1/2" MPT (1) Silicone thermowell cover (1) 1.5" TC sleeved thermowell adapter (1) FTSs harness extension 3 ft (1) Silicone check valve Works with 1, 2, and 3.5 bbl Nano Jacketed Tanks Not required for Unitank 2.0
$49.95
-
Portable Valve Tree | Ss BrewTech
Inspired by the patented valve trees on every Ss Brewtech Pro Brewhouse. The Portable Valve Tree makes it easy to transfer your brews in and out of your brew vessels without needing to constantly disconnect and reconnect your pump. Pre-drilled holes in the base plate allow Chugger TC Stainless Head Pumps to be installed with ease. Taking samples is critical during a brew day, so just like the Pro Brewhouses, the Portable Valve Tree includes a sample valve. The Pure Flow Sample Valve, pulled from the Chronical 2.0, is the perfect pairing. Kit includes: Valve Tree Assembly (8) 1.5" TC Clamps (8) 1.5" TC Gaskets (1) 1.5" TC Offset Tee (1) ¾” TC Sample Valve (1) ¾” TC Clamp Pump Mounting Hardware *Note that the valve tree is designed to work with nearly any 1.5" TC valves and thus does not include valves. Additional needed parts: 1.5" TC valves and Chugger TC Head Pump
$199.99
-
White Labs Yeast | WLP067 Coastal Haze Ale Blend | Beer Yeast | PurePitch® Next Generation | Industry Leading Viability | 150 Billion Cells
This blend of our favorite New England-style IPA strains is great for producing beers with a hazy appearance and tropical, fruit-forward esters. Producing dry, yet juicy beers, the mango and pineapple characteristics will lend to added drinkability. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Attenuation: 75-82% Flocculation: Low to Medium Alcohol Tolerance: 8-12% ABV Optimum Fermentation Temp: 68-72°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$14.99
-
Brewtools | Replacement Temp. Sensor | Tank, 90mm M20x1.5, v2023
Digital tank sensor (DS18B20) with gasket. Recommended hole size: 22mm
$48.00
-
A-Style Keg Coupler | German Slider Beer Tap | Stainless Steel Body & Probe | PRV | Beer & Gas Barbs Included
For Paulaner or Spaten keg, this is an A-Type keg tap. Also known as a keg coupler, keg tap, coupling, or adapter. Both barbs measure 3/16" ID and 1/4" OD. This model features a pull-ring pressure relief valve (not pictured). KegLand Part Number: KL06057
$58.99
-
BrewZilla Neoprene Jacket | 100L | Gen 4 | Sparge Arm Sleeve | Improves Heating Times | Reduces Heat Loss | Removable for Faster Chilling
Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Sparge arm sleeve included to reduce heat loss during mash recirculation Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 100L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use KegLand Part Number: KL24389
$43.99
-
Replacement Wire Malt Pipe Support for 100L BrewZilla
Replacement Wire Malt Pipe Support for 100L BrewZilla. Made from 304 stainless steel. KegLand Part Number: KL32285
$16.49
You have seen 1680 out of 2749 products