Beer Making

3/8-24 UNF x TR21-4 adapter ring for the KegLand Core 360 Mini CO2 Regulator. Suitable for 16 g CO2 cartridges. This is a replacement standard ring that is included with the regulator.

Read more less

With the Torpedo Buoy™ floating dip tube with filter, you'll be pouring the clearest beer possible from first pint to last! As your beer sits at low temperatures, more and more haze particles settle out to the bottom of the keg. This means the clearest beer in the keg is always at the top. The Buoy™ uses a stainless float to position the silicone dip tube just 1" below the surface of the beer. The Filter helps keep your dip tube clear of any solids or hops ensuring a clear line. It also helps to keep the dip tube well submerged below the liquid line to avoid issues where the dip tube might get out of position and suck CO2 from the headspace. Kick homebrew haze to the curb and start drawing the brightest beer possible. Yeah, Buoy! If you prefer to use the Buoy without the filter attachment, the standard model can be found here. Installs on any Ball Lock or Pin Lock keg quickly and easily. Simply remove your bev out post and replace the long metal dip tube with the provided 3" metal dip tube. Slide one end of the silicone tubing over the 3" dip tube and the other end of the tubing over the metal tube connected to the float. The silicone tubing is sized for 5-gallon kegs, but you can cut it shorter to use on 1.5 or 2.5-gallon kegs. Also compatible with the Torpedo Keg Depth Charge series 10 & 15 gallon kegs! Specifications: 3" Stainless Dip Tube 1/4" ID Silicone Tubing (23.5" long) Ball Float Made from 304 Stainless Steel Weighted Filter Attachment made from HDPE and 304 Stainless Steel mesh Installation Note: The Torpedo Buoy™'s silicone dip tube is sized to fit all Torpedo Kegs and other 5-gallon or smaller corny kegs. Depending on the size and dimensions of your keg, you may need to shorten the silicone tube for better performance. When installed on your empty keg, you ideally want the Buoy™ to hang freely with just enough length for the end of the dip tube to touch the bottom of the keg.

Read more less

The BlowTie 2 Spunding Valve complete kit with Duotight Ball Lock QD is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) 8 mm Duotight Gray Ball Lock Disconnect 8 mm OD Rigid Plastic Joiner    

Read more less

Keep your catch of the day fresh with the Igloo® Marine Ultra 54 Quart Cooler. It’s designed with Ultratherm® insulation for optimal cooling performance and has an integrated fish ruler on the lid. The marine-grade design can withstand to the wet conditions and features rust-resistant stainless steel screws, ultraviolet inhibitors, and a stainless steel hinged latch.   Features: Ultratherm® insulated lid offers cooling performance Holds 83 cans Features an integrated fish ruler on lid Ultraviolet inhibitors protect the cooler against sun damage Rust-resistant stainless steel screws and lid strap Stainless steel hinged latch Recessed triple-snap drain plug makes clean up simple Marine-grade hinges Non-slip grip handles provide comfortable carrying Capacity: 54 Quart Dimensions: 26.375” x 15.5” x 15.5” Weight: 8.1 lbs. Manufacturer’s warranty: 1-year Country of Origin : United States of America Style : 44683 DSG Pro Tips Brand : Igloo  

Read more less

This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 35L Gen 4 BrewZilla. Made from food grade silicone and temperature resistant to 356°F (180°C). KegLand Part Number: KL27731

Read more less

Used – Refurbished   This unit is used. It has been restored to working order. It will have cosmetic defects and show signs of previous use.   It is still covered by our No Hassle Return Policy and 1 Year Warranty Policy.   We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of beer. Convenient top hatch makes cleaning and oaking easy. Heavy duty sealing mechanism and thick gasket ensure an air tight seal. The inside is finished to Speidel quality standards. Bottom drain fittings are 1.5" Tri-Clamp. Conical tanks come standard with legs. Also this tank specifically is made to handle up to 1.2 bar (17.4 psi). Key Features Full Jacket - Fermenters are equipped with a jacket that covers all accessible areas of the tank. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY411) for complete temperature control! Included Options - Features 1.5" T.C. outlets (One complete drainage at the bottom of the cone, one in the middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. These are equipped with hardware at the factory, one has a sample valve; the other has a thermowell/thermometer combination.  Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively means cleaning is too easy. Watch the Krausen wash right off! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Thickness - Speidel tanks are on average around 25% thicker than Italian manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - Tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Features Full Volume of 625l (165 gal). Perfect for fermenting single batches brewed on the Speidel 500L Braumeister Handles pressures up to 1.2 bar (17.4 psi) - use as a bright tank or unitank! 1.5" T.C. Drain, Racking Port, and Lid outlet. 8.5" Top hatch for easy cleaning and additions. 2 X DIN10 Fittings w/ Sample Valve and Thermowell/ Thermometer combo Dimensions: 32.25" D x 85" H (820mm D x 1661mm H) Please note: this tank does not include the 1.5" TC Tee with pressure gauge and valve pictured in the top right of the product photo. See our CONP775 listed below under "You Might Also Need".

Read more less

Replacement 6W high temperature magnetic drive pump for 220V Gen 4 BrewZillas. Compatible with 35L & 65L units. This pump is not backwards compatible with Gen 3 or older units. KegLand Part Number: KL24341

Read more less

Replacement 6 Watt high temperature magnetic drive pump for 110V Gen 4 BrewZillas. This pump is not backwards compatible with Gen 3 or older units. KegLand Part Number: KL24358

Read more less

There's never enough counterspace on brew day. The heavy-duty stainless steel work table is an excellent companion to carry water for you, and with the swivel rolling casters, it will be happy to follow you from station to station around your brewery. With a 400 lb top shelf weight capacity and 300 lb undershelf weight capacity, this humble work table is more than capable of being the Robin to your Batman. This is the very same table featured in the BrewBuilt X2 Jacketed Conical Ultimate Chilling Package. The top shelf is the perfect size for a 7 or 14 gallon X2 Conical, and the undershelf is the perfect hangout for an IceMaster Max 2 Glycol Chiller. The work table will not accommodate a 25 or 38 gallon X2 conical. Specs: Top Shelf Dimensions: 24" x 24" Height: 34" Top shelf Capacity: 400 lb Undershelf Capacity: 300 lb Tabletop made from 18-gauge, 304 stainless steel Undershelf and legs made from galvanized steel

Read more less

The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. If you're an existing FermZilla Conical or All Rounder user and you already own the Pressure Kit with 2x Ball Lock Caps and floating dip tube, check out the Hop Bong Upgrade Kit. The 3 Pieces of the Hop Bong Pressure Pack: Pressure Kit ​The Pressure Kit includes two Ball Lock Caps with the Floating Dip Tube and Filter Attachment. These pieces allow you to pressure transfer finished beer out of the fermenter into kegs or a bottling bucket, or you can carbonate and serve beer directly from the FermZilla. Tri-Clamp Pressure Lid Replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil. Hop Bong  Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a third Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets. Hop Pellet Capacity: 150–180g (5.2–6.3 oz) Kit Includes: FermZilla 2" T.C. Pressure Lid Starter Kit 2" Hop Bong 2" FermZilla Tri-Conical Butterfly Valve Floating Dip Tube Weighted Mesh Filter Attachment (KEG6571) Red PRV & PCO1881 Cap Combo Yellow Ball Lock Cap (2) Red Ball Lock Caps (2) 2" Tri-Clamps (2) 2" Silicone T.C. Gaskets KegLand Part Number: KB10897 Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.

Read more less

A very portable mini CO2 regulator. Use with 74g CO2 cartridges. Features: Range of .5-1.5 bars or 7-21 psi Uses 74 gram CO2 cartridges Two stage Consistent pressure Regulator only The mini CO2 regulator does not have an internal check valve. To add a check valve use the regulator with KEG729 or KEG741.    

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late March. Designed specifically for cleaning draft lines, this hand pump pressurized keg is easy to use and doesn't need CO2 like many other line cleaning kegs. After filling the keg with cleaning solution, unscrew the beer line from your sanke coupler and attach it to the included beer thread coupler to hook it up directly to the cleaning keg. Pumps from the bottom to the top, allowing you to leave the cleaning solution in the line for 15 minutes. We recommend cleaning your lines every time you switch out a keg or every 6 weeks, whichever comes first. 1 gallon capacity Comes with a 3/16” x 5/16” hose Included Female Beer Thread (5/8" BSP) Coupler Also Included: Beer Line Cleaning Brush ​With 8" length and 5/8" diameter, this brush is ideal for cleaning keg couplers, draft faucets, 3-Piece airlocks, 1/2" bottle fillers, and 3/8" or 1/2" spigots. Features a coated tip to prevent scratching or damaging surfaces. Draft Beer Faucet Brush and Plug ​Keep fruit flies and other bugs out of your draft beer faucets when not in use. This plug style brush will clean the faucet nozzle on the way in and when pulled out. It works with standard beer faucets and Intertap, NukaTap, and Perlick brand faucets. Double Shank and Faucet Wrench Draft wrench designed to tighten the hex nut on the back of a faucet shank. Well suited for keezers or even draft towers. Features a pin wrench for tightening the faucet coupling ring where your faucet attaches to the draft shank.

Read more less

Thermowell for temperature sensors. 160mm length recommended for F100, F150, and F300 fermenters. TC 34mm Inside diameter: 7mm Length: 160mm

Read more less

The insulation jacket reduces heat loss during brewing. Recommended for use outdoor or in colder environments. For B150pro brewing system.

Read more less

The insulation jacket reduces heat loss during brewing. Recommended for use outdoor or in colder environments. For B80pro brewing system.

Read more less

The insulation jacket reduces heat loss during brewing. Recommended for use outdoor or in colder environments. For B40pro brewing system.

Read more less

An inline oxygenation kit designed to inject oxygen during transfer to fermenter. We recommend placing a sight glass after the TC tee, to keep an eye on the O2 flow. Requires an oxygen tank with a pressure regulator. Included: TC 34mm Tee Barbed O2/CO2 stone holder, 6-10mm tube O2/CO2 stone, 0.5micron. G1/8" threads 3 TC 34mm clamps 1 5-pack of TC 34mm gaskets 1 gasket for the stone

Read more less

Filter holder in stailess steel for use in all temperatures. For 180mmx30mm filters. Holds the Brewtools 30mm filter in place in M16 ball locks or other M16 holders.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability. Gap width: 1.3mm Pre-cut hole for weldless fitting to use with future accessories.

Read more less

Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability. Gap width: 1.3mm Pre-cut hole for weldless fitting to use with future accessories.

Read more less

Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability. Gap width: 1.3mm Pre-cut hole for weldless fitting to use with future accessories.

Read more less

The sample valve coil (Pigtail) reduces foam when drawing samples from a pressurized tank.

Read more less

4" CIP adapter with 1/2" MPT threads for CIP spray ball with or without extension pipe. Used for CIP via the 4" port on Brewtools Steam Hats or the F150 Unitank.  Fluid input is TC 34mm. Remember 34mm Tri-Clamp and gasket are needed, and also the fitting of choice for connecting fluid input.

Read more less

3" CIP adapter with 1/2" MPT threads for CIP spray ball with or without extension pipe. This is the correct size for the Brewtools F40 and F80 Unitanks. Fluid input is TC 34mm. Remember 34mm Tri-Clamp and gasket are needed, and also the fitting of choice for connecting fluid input.

Read more less