Beer Making

Over time the internal diaphragm can wear out and result in drifting pressure or a slow leak through the regulator body. Replacing the diaphragm is usually the best path to the fixing these issues so your regulator can return to holding consistent pressures. Compatible with both the single and dual-body KOMOS regulators.  

Read more less

The Chillout MKIV, now with new and improved male 1/2" BSP threaded posts, is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start. The Chillout is made from stainless steel and brazed together with pure copper. It also has ripples up and down each plate. This creates more surface area and improves heat transfer. To clean, connect water supply to the port where your wort was coming out and backflush the unit for a few minutes to ensure that any residue has been completely washed out. Remember to sanitize either with boiling wort, or a short flush with Star San before use. Do not clean with Sodium Hydroxide or leave Phosphoric Acid based sanitizers left to store inside the plate chiller. Features: Made from stainless steel and copper Rippled plates for more surface area 1/2" Male BSP connections Dimensions: 12.4" x 2.8" x 2" (not including threads) KegLand Part Number: KL21234  

Read more less

This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 9.5 mm OD tubing (D1719). With the lock nuts in place, there is approximately 1" of pass through threading. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. KegLand Part Number: KL21012  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The new Grainfather Conical Fermenter Wireless Temperature Controller is wifi-enabled, and is designed for use with the Grainfather Conical Fermenter PRO. This all-new wireless controller is an upgrade from the standard Conical Fermenter Temperature Controller, and can be easily installed on the Conical Fermenter using the directions provided below. Control the heating and cooling (when used with The Grainfather Gylcol Chiller or Cooling Pump Kit) of your Grainfather Conical Fermenter remotely with the Conical Fermenter Wireless Temperature Controller. Simply connect the controller to the Grainfather App and control and track the fermentation temperature when you're out and about. This new wireless controller attaches directly to the fermenter, alleviating any concern of the controller falling off the mounting bracket.    

Read more less

Viking Malt - Sahti Malt is a special malt blend for producing the traditional Finnish beer, Sahti. This unique beverage is uncommon in modern brewing but still highly appreciated, for example, by the late Michael Jackson, an English writer and journalist who has written several books about beer and whiskey. Sahti is traditionally brewed in farms and country houses and is still enjoyed today at festivals and summer weddings in Finland.  

Read more less

32 oz crowler cans and ends. Pallet contains 2,400 units. 300/307 x 710 Crowler.  

Read more less

Insulating jacket for the 30L FermZilla All Rounder. This jacket is designed to insulate your FermZilla during the colder months to keep your fermentation at the optimun temperature. It can also be used with a heating wrap to warm up the fermenter if the heat from fermentation isn't enough. Also completely blocks any light/UV to prevent light stuck beer. Kegland Part number: KL19590  

Read more less

Replacement glass tube for the KOMOS Keg Filler FOB (KEG210).

Read more less

The KOMOS Keg Filler FOB is designed by our in-house engineers to stop the flow of beer once a keg is full. With a sleak design, it is easy to clean and extremely versatile if you wish to reconfigure it for another task.  The KOMOS Keg FIller FOB is intended as an upgrade to our Four Station Manual Keg Filler and Single Station Manual Keg Filler.  Features: Borosilicate Sight Glass Beer Thread (5/8" BSP) Easy to clean Silicone Washers Stainless Construction Food Grade Check Ball NOTE: Four Station Manual Keg Filler requires four Keg Filler FOBs

Read more less

Pumping off the mash tun is the easiest way to collapse the screens. It is recommended that you either put a tee and a vacuum breaker ahead of the pump or run the wort into a grant and pump off the grant. Controlling the pump with restriction, a VFD, or a dual level float switch is ideal. This tall cylindrical grant has three 1.5" tri-clamp ports and a silicone tube for a sight glass. The narrow design helps to reduce surface area and hot side aeration. The inlet and outlet side ports are raised a few inches above the conical dish bottom dump, which helps to separate grain sediment from the wort. 40L / 10.5 gal Made from 304 stainless steel Ships without valves    

Read more less

KOMOS Jockey Boxes are packed with features that you won't find in standard jockey boxes. From the forward-sealing faucets, to the 50-foot stainless draft coils, these draft boxes are designed to provide years of foam-free dispensing.   KOMOS Rubicon Jockey Box   100% stainless steel draft coils Shanks & coils are custom designed for proper cooling and flawless pouring The only draft box that uses stainless steel Intertap forward sealing faucets Push-In coil design applies force toward shank connection to protect against shank and coil separation Stainless Steel construction on all serving components means this box will last for years Heavy-duty rotomolded Rubicon Cooler is virtually indestructible High-density polyurethane insulation and compression lid for superior ice retention Pairs perfectly with a KOMOS Connection Kit Features: 37 Quart Rubicon Cooler  4 x 50’ Stainless Steel Coils (5/16” OD)  4 x Stainless Steel Faucet Shanks 4 x Stainless Steel Pass Through Shanks 4 x Stainless Steel Flanges 4 x Stainless Steel Forward Sealing Faucets 4 x Black Tap Handles Jockey Box Specs: 23.25" L x 16.25" W x 16.5" H 45.7 lbs  

Read more less

KOMOS Jockey Boxes are packed with features that you won't find in standard jockey boxes. From the forward-sealing faucets, to the 50-foot stainless draft coils, these draft boxes are designed to provide years of foam-free dispensing. KOMOS Rubicon Jockey Box 100% stainless steel draft coils Shanks & coils are custom designed for proper cooling and flawless pouring The only draft box that uses stainless steel Intertap forward sealing faucets Push-In coil design applies force toward shank connection to protect against shank and coil separation Stainless Steel construction on all serving components means this box will last for years Heavy-duty rotomolded Rubicon Cooler is virtually indestructible High-density polyurethane insulation and compression lid for superior ice retention Pairs perfectly with a KOMOS Connection Kit Features: 37 Quart Rubicon Cooler  2 x 50’ Stainless Steel Coils (5/16” OD)  2 x Stainless Steel Faucet Shanks 2 x Stainless Steel Pass Through Shanks 2 x Stainless Steel Flanges 2 x Stainless Steel Forward Sealing Faucets 2 x Black Tap Handles Jockey Box Specs: 23.25" L x 16.25" W x 16.5" H 35.3 lbs  

Read more less

KOMOS Jockey Boxes are packed with features that you won't find in standard jockey boxes. From the forward-sealing faucets, to the 50-foot stainless draft coils, these draft boxes are designed to provide years of foam-free dispensing. KOMOS Rubicon Jockey Box   100% stainless steel draft coils Shanks & coils are custom designed for proper cooling and flawless pouring The only draft box that uses stainless steel Intertap forward sealing faucets Push-In coil design applies force toward shank connection to protect against shank and coil separation Stainless Steel construction on all serving components means this box will last for years Heavy-duty rotomolded Rubicon Cooler is virtually indestructible High-density polyurethane insulation and compression lid for superior ice retention Pairs perfectly with a KOMOS Connection Kit Features: 37 Quart Rubicon Cooler  4 x 50’ Stainless Steel Coils (5/16” OD)  4 x Stainless Steel Faucet Shanks 4 x Stainless Steel Pass Through Shanks 4 x Stainless Steel Flanges 4 x Stainless Steel Forward Sealing Faucets 4 x Black Tap Handles Jockey Box Specs: 23.25" L x 16.25" W x 16.5" H 45.7 lbs  

Read more less

KOMOS Jockey Boxes are packed with features that you won't find in standard jockey boxes. From the forward-sealing faucets, to the 50-foot stainless draft coils, these draft boxes are designed to provide years of foam-free dispensing. KOMOS Rubicon Jockey Box 100% stainless steel draft coils Shanks & coils are custom designed for proper cooling and flawless pouring The only draft box that uses stainless steel Intertap forward sealing faucets Push-In coil design applies force toward shank connection to protect against shank and coil separation Stainless Steel construction on all serving components means this box will last for years Heavy-duty rotomolded Rubicon Cooler is virtually indestructible High-density polyurethane insulation and compression lid for superior ice retention Pairs perfectly with a KOMOS Connection Kit Features: 37 Quart Rubicon Cooler  2 x 50’ Stainless Steel Coils (5/16” OD)  2 x Stainless Steel Faucet Shanks 2 x Stainless Steel Pass Through Shanks 2 x Stainless Steel Flanges 2 x Stainless Steel Forward Sealing Faucets 2 x Black Tap Handles Draft Box Specs: 23.25" L x 16.25" W x 16.5" H 35.3 lbs  

Read more less

KOMOS Jockey Boxes are packed with features that you won't find in standard jockey boxes. From the forward-sealing faucets, the 50-foot stainless draft coils to the new front entry inlets, these draft boxes are designed to provide years of foam-free dispensing. These units with front entry design are perfect for serving from behind a bar. Instead of having the draft lines entering on one side and the faucets pouring from the other, these draft boxes have everything on the same side you'll be pouring from.   KOMOS Stainless Steel Jockey Box   Front off setting inlets for better access for pouring 100% stainless steel draft coils Shanks & coils are custom designed for proper cooling and flawless pouring The only draft box that uses stainless steel Intertap forward sealing faucets Push-In coil design applies force toward shank connection to protect against shank and coil separation Stainless steel Shank Plates protects the cooler from being damaged when tightening faucets and shanks Stainless Steel construction on all serving components means this box will last for years Premium Stainless Steel Cooler provides superior ice retention Pairs perfectly with a KOMOS Connection Kit Features: 54 Quart Stainless Steel Cooler  50’ Stainless Steel Coils (5/16” OD)  Stainless Steel Faucet Shanks Stainless Steel Pass Through Shanks Stainless Steel Flanges Stainless Steel Forward Sealing Faucets Black Tap Handles Stainless Steel Shank Plates (inner & outer) 25" L x 18" W x 17.75" H Weight: 43 lbs  

Read more less

KOMOS Jockey Boxes are packed with features that you won't find in standard jockey boxes. From the forward-sealing faucets, the 50-foot stainless draft coils to the new front entry inlets, these draft boxes are designed to provide years of foam-free dispensing. These units with front entry design are perfect for serving from behind a bar. Instead of having the draft lines entering on one side and the faucets pouring from the other, these draft boxes have everything on the same side you'll be pouring from.   KOMOS Stainless Steel Jockey Box   Front off setting inlets for better access for pouring 100% stainless steel draft coils Shanks & coils are custom designed for proper cooling and flawless pouring The only draft box that uses stainless steel Intertap forward sealing faucets Push-In coil design applies force toward shank connection to protect against shank and coil separation Stainless steel Shank Plates protects the cooler from being damaged when tightening faucets and shanks Stainless Steel construction on all serving components means this box will last for years Premium Stainless Steel Cooler provides superior ice retention Pairs perfectly with a KOMOS Connection Kit Features: 54 Quart Stainless Steel Cooler  50’ Stainless Steel Coils (5/16” OD)  Stainless Steel Faucet Shanks Stainless Steel Pass Through Shanks Stainless Steel Flanges Stainless Steel Forward Sealing Faucets Black Tap Handles Stainless Steel Shank Plates (inner & outer) 25" L x 18" W x 17.75" H Weight: 32 lbs  

Read more less

Sitiva™ hops are known for their bright, juicy, tropical, and citrus-forward aroma and flavor profile.  Tropical Fruit – think mango, passion fruit, and pineapple Citrus – especially lime zest, orange, and grapefruit Stone Fruit – subtle hints of peach or apricot Floral and Herbal – some people also detect light floral or green herbal notes, though they’re secondary Sitiva is often described as clean, modern, and expressive, making it popular for use in hazy IPAs, pale ales, and other hop-forward styles. It really shines in late hop additions or dry hopping where those fruity aromatics really pop.It is ideal for aroma, whirlpool, and dry hop additions any hoppy styles where a combination of tropical fruit, stone fruit, and citrus-lime aromatics are desired.   Hop Statistics: Alpha Acids: 7.2 – 7.6% Beta Acids: 4.2 – 4.5% Alpha-Beta Ratio: 1.6 – 1.8 Cohumulone: (% of alpha acids): 27 – 28% Total Oils in mls per 100 grams dried: 0.9   HS-Sitiva™ is a trademark owned Brewers Supply Group, Inc.  

Read more less

This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurizable growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This version features a 6.5mm Duotight compatible stem. Use the 8mm or 9.5mm reducer to attach EVABarrier draft line. 28mm PCO 1881 Threads Please note: The threaded section of the bottleneck must be at least 1/2" long to form a seal. These caps are not compatible with the KegLand 500mL PET Bottles. Kegland Part Number: KL20435

Read more less

These regulator gas boards are the ideal way to mount your mini inline regulators to your wall so you can supply gas to various kegs at different pressures. The mounting holes for the wall mounting are pre-drilled, the holes for the regulators are pre-drilled and this makes installation really easy. Made from food-grade polypropylene plastic. Regulators, fittings, labels, and mounting hardware are not included. For a fully rigged gas board, we recommend the following parts: 6 x Inline Regulators 12 x Rigid 8mm Joiners 5 x Duotight 8mm Tee Pieces 1 x Duotight 8mm Elbow These items can be found below under You Might Also Need.   KegLand Part Number: KL17718  

Read more less

Our yeast brinks give you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The 4" TC welded to the top makes inspection and cleaning a breeze. The dip tube is about an inch off the bottom to help keep non-yeast solids that separate from your repitch. 1 bbl is perfect for up to a 20 bbl batch with most yeasts. Also available in 1/4 bbl size for up to 5 bbl batches and 1/2 bbl size for up to 10 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT. You may also want a keg cart. This brink is the same diameter as a keg but twice the height.  

Read more less

Upgrade the existing base of the Tapcooler Canning Station with this sleek drip tray Integrates seamlessly with the canning station Any spills are collected in the drip tray and routed out the back via the included drain tube attachment Canning is fun, but it can be messy. Cut down on the mess with this drip tray upgrade attachment for the Tapcooler canning station. This drip tray replaces the stock circular base that comes with the Tapcooler canning station. The sleek design gives you a slightly wider footprint to put the can on. After filling is complete, and spillover will be collected in the drip tray, and routed out the back via the included drain tube. Make canning fun AND mess free with this Drip Tray for the Tapcooler Canning Station. Kit Includes: Drip Tray base Drain tube with push fit fitting  

Read more less

The HopShot will boost IBUs without adding vegetal matter to the wort. This CO2 hop extract is a blend of Cluster and Magnum hops. 1 mL boiled in 5 gallons of 1.050 wort for 60 minutes will add approximately 10 IBUs. Add to boiling wort only. 10 mL syringe 57% Cluster 43% Magnum Earthy, Fruity Store in the refrigerator between uses.  

Read more less

The HopShot will boost IBUs without adding vegetal matter to the wort. This CO2 hop extract is made from 100% Columbus hops. 1 mL boiled in 5 gallons of 1.050 wort for 60 minutes will add approximately 10 IBUs. Add to boiling wort only. 10 mL syringe 100% Columbus Earthy, Citrus Store in the refrigerator between uses.  

Read more less

The HopShot will boost IBUs without adding vegetal matter to the wort. This CO2 hop extract is made from 100% Centennial hops. 1 mL boiled in 5 gallons of 1.050 wort for 60 minutes will add approximately 9 IBUs. Add to boiling wort only. 10 mL syringe 100% Centennial Citrus, Floral Store in the refrigerator between uses.  

Read more less