Beer Making

Use this splitter to run two propane burners from one propane tank. In most applications two burners is the max you can simultaneously run from one tank before you start to freeze up the vavle on the propane tank. Works well with BrewBuilt™ AfterBurners, Camp Chef burners, and other brewing related burners.      

Read more less

Think Stave Segments, evolved.  The BeerStix Domininos are 1 1/2" square segments of oak, milled to give you quick extraction, and full flavor.  While similar to conventional stave segments, you will see similar results in a much shorter timeframe, making these much more suitable for beer.  This is a 490 g (1 lb) bag of French Oak Domininos, Toasted Medium Plus and sized to oak 100 gallons of Beer.  This is the quickest turnaround on a Beer Stix product.  At one month extraction, you'll see a quick integration of rich oak character due to the high surface area of these domininos in contact with your beer. Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Domininos will provide a round and rich oak character specific to the toast level and origin.  French Oak toasted to a Medium + with the beerstix milling will give your beer toasted roasty aromas reminiscent of coffee, along with some caramel, and a subtle sweetness that gets the whole palate.  Different beer styles will accentuate or mask different flavors from the oak, so expect some variation! Features: Oak Origin - France, Allier Region Toast Level - Medium Plus Oak Form - Domininos, 490 gram Volume Treated - 100 Gal Beer Extraction Time - 1 Month (see note below) Flavors & Aromas - Coffee, Roasted Toasty aromas, Caramel, Slight Sweetness Please Note - Allow 1 month minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.

Read more less

Beerstix 8 piece Barrel Tethers are a great new means of imparting high quality Oak flavor to your beer.  These tethers are designed to fit through the bung hole of a barrel, and sized to treat 59 gallons of beer (for smaller volumes, or less oak impact, simply cut off sections as necessary).  Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Tethers will provide a round and rich oak character specific to the toast level and origin.  American Oak toasted to a Medium + with the beerstix milling will give you flavors and aromas of roasted coffee, light chocolate and honey, as well as some spice notes and hints of leather.  Every beer will accentuate, or mask different flavors from the oak, so expect some variation between beers! The Beerstix miling gives 60% more surface area compared to the Winestix, speeding up the extraction process, and getting you a beer that has a rich oak character, in less time.  The Beer Stix are also milled thinner than the WineStix, allowing for denser toasting. Features: Oak Origin - North American New York Alba Toast Level - Medium Plus Oak Form - Barrel Tether (8 Piece) Volume Treated - 59 Gal Beer Extraction Time - 2 Months (see note below) Flavors & Aromas - Roast Coffee, Light Chocolate, Spice, Honey, Nutmeg, Leather Hints. Please Note - Allow 2 months minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.  

Read more less

A solid base designed for the Monster Mills.  Mounts your Monster Mill securely to simplify your brew day.  Measures just under 12"x 12". Please Note: This is just the Fiber Board Base Only for Monster Mills.  For a complete setup as shown in the picture, see our 3 Roller Monster Mill Packages.

Read more less

Replacement Total Alkalinity Indicator test reagent (15 ml) with a 6 month shelf life Does not include complete BrewLab test kit.   See BrewLab Basic® test kit or BrewLab Plus test kit for additional information.

Read more less

Using an electric Recirculation Infusion Mash System heater to heat your mash is one of the safest and most energy-efficient ways to get your brew to the perfect temperature, and the Blichmann RIMS-Rocket is one of the most popular models on the market today. This innovative heater is designed especially for use with the popular Blichmann HopRocket™ canister, and to install it all you have to do is secure it inside of the canister, plug it in, and monitor the temperature. The RIMS-Rocket operates with 2000 W, 120V and ultra low watt density in order to perform optimally in your RIMS system. It features a "plug and play" 12-foot long factory wired cable with a molded twist-lock L6-30P plug on one end and a removable plug on the other end, making it easy to clean because there are no dangling cords attached to the side of your heater. Best of all, the ultra low watt density ensures that you’ll never scorch your mash during the heating process!  Features: The RIMS-Rockettm heating element is 2000 W, 120V, ultra low watt density and is engineered to perform optimally in your RIMS system Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your heater and the terminal pins are spray-down capable!  The RIMS-Rockettm heater assembly clamps right into our HopRockettm canister for added versatility and lower cost. The RIMS-Rockettm includes a "plug and play" 12ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. Less than Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!) Please note: mounting bracket sold separately.  

Read more less

Easily connect multiple BrewBuilt AfterBurners together to create your very own brewing stand. Predrilled holes on every BrewBuilt Burner allow for easily assembly. Includes stainless straps for backside connection along wtih a laser cut plate for the front of the stand.  Front plate also includes predrilled holes for mounting a pump bracket. 8 bolt assemblies are included for a rocksolid connection. This beefy mounting plate is made in the US out of thick, 12 gauge 304 Stainless Steel.

Read more less

This SS handle option is a great upgrade to get your AfterBurner moving!  Combine this with the Caster Package and your AfterBurner will be an easily cartable brewery.  This handle is designed specifically for the Modular AfterBurner Packages, and has drilled holes for easy attaching. Comes with Stainless Steel Handle and Bolt connection packages.  Please note that this handle is designed specifically for the BrewBuilt AfterBurner.

Read more less

Add these super-duty casters directly to your BrewBuilt AfterBurner and save your back. Your BrewBuilt Burner comes with pre-drilled holes making installation super easy.  Includes two casters, two stainless steel mounting brackets, and four bolt packages.  When also used with the optional BrewBuilt Handle you will be able to easily wheel your burner into place.  

Read more less

A Pressure Relief Valve upgrade or replacement for the Chronical line of fermenters from Ss BrewTech. Features: Standard replacement part for Half Barrel Can be retrofitted to 7 Gal Chronical lid Releases pressure between 2-2.5 psi Food grade silicone O-ring Use Dewalt DWA1783IR step bit for retrofit For 7/32" inch hole diameter (in lid)

Read more less

A replacement gasket for the lids of Half Barrel Chronicals. Features: Brewer's Grade Silicone Replacement part for Brew Buckets and Chronical Series Fermenters

Read more less

A replacement gasket for the lids of 14 Gallon Chronicals.

Read more less

Tri-clamp racking arm adapter for 7, 14, and 1/2 BBL Chronical Conicals. Features: 304 Stainless Steel construction For those of you who want threadless/ TC fittings Custom designed for Chronical series fermenters! Use with 1.5" TC butterfly valve of your choice

Read more less

Replacement O-rings for the Chronical Racking Arm bought after September 2014.   

Read more less

Adjustable feet for Ss Brewtech chronicals. 3/8" threaded and comes in a set of 4. Does not work with standard 7 gal Chronical.

Read more less

Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the 14 Gallon Chronical Fermentor. Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Features: Custom lid w/ 304 Ss immersion chiller coil Pro grade (super quiet) submersible pump 110-240V power supply 304 Ss weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller

Read more less

Give your Chronical insulation to help with maintaining fermentation temp and assist with cold crashing. Specifically sized for the 10-clamp version of the 1/2 bbl unit.

Read more less

Replacement pre-drilled FTSs lid. Included with the the Ss BrewTech FTSs chilling system for the 1/2 bbl Chronical. Lid only. This does not include the other FTSs components.

Read more less

Replacement FTSs lid with pre-drilled holes. Fits the 7-gallon Ss Brewtech Chronical and Brew Bucket.

Read more less

Power Adapter from Blichmann Engineering. The adapter allows the 240V BoilBoil cable with L6-30P plug to be used with a 14-50P outlet. 14-50P outlets are commonly used for charging electric vehicles, RVs and electric ranges. 1.25 ft in length.

Read more less

Power Adapter from Blichmann Engineering. 1.25 ft in length. 6-30P.

Read more less

This Robust Porter recipe has a smooth roastiness that you will enjoy sip after sip Includes Fuggles and Cascade hops Estimated ABV: 5.8% Estimated IBUs: 22-27 Makes 5 gallons of finished beer The future of porters is here.  Introducing RoboPorter!  While this beer isn't going to stop crime or save lives*, it is definitely a robust porter that you need to try!   A noticeable, but not overwhelming roastiness covers your palate, making you want another sip as soon as you put down your glass.  The bottom line is, this is an amazing robust porter, and if it could talk, we're guessing it would say "extract or all grain, you're brewing with me"! *Note: It is possible that RoboPorter could stop crime or save lives, just not guaranteed. Makes 5 gallons Estimated Original Gravity:1.058-62 SRM (Color Range): 34 IBUs: 22-27 Estimated Alcohol Percentage: 5.8%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

This Robust Porter recipe has a smooth roastiness that you will enjoy sip after sip Includes Fuggles and Cascade hops Estimated ABV: 5.8% Estimated IBUs: 22-27 Makes 5 gallons of finished beer The future of porters is here.  Introducing RoboPorter!  While this beer isn't going to stop crime or save lives*, it is definitely a robust porter that you need to try!   A noticeable, but not overwhelming roastiness covers your palate, making you want another sip as soon as you put down your glass.  The bottom line is, this is an amazing robust porter, and if it could talk, we're guessing it would say "extract or all grain, you're brewing with me"! *Note: It is possible that RoboPorter could stop crime or save lives, just not guaranteed. Makes 5 gallons Estimated Original Gravity:1.058-62 SRM (Color Range): 34 IBUs: 22-27 Estimated Alcohol Percentage: 5.8%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.     Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

This is an extension that fits onto the Blichmann 55 Gallon BoilerMaker kettles. It has the G2 finish, matching their newest line of kettles. Using this extension, the 55 gallon BoilerMaker nearly doubles its volume to top out at slightly over 100 gallons! Comes with a gasket for a watertight seal between the BoilerMaker Kettle and its Extension. The extension comes with a sight gauge marked up to 100 gallons, and the original lid for your BoilerMaker will fit right on top. This is designed for 2 BBL batches, and is a great option for someone who wants to expand capacity without starting over with a new Brew Stand and set of kettles! We've found that using a StarSan solution around the gasket / 55 gallon kettle top helps to get the extension into the kettle.  NOTE - Does not come with 55 Gallon Kettle in picture. This is just for the extension (top half).  You will also need the Extension Removal tool to use this unit.

Read more less