Beer Making

The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation. Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories. Key Features: PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation Easy cleaning with a 4" T.C. top port and 2" T.C. bottom port Pressure rated for 2 bar / 30 PSI. Wall bracket included If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit. MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Packaging size: 13.3" (w) x 13.3" (d) x 16.9" (h)   Net weight: 13.4 lbs Gross weight: 15.9 lbs Tank diameter (inside): Ø11" Max volume: 2.6 gal Cone volume: 0.4 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2 bar / 30 PSI In the Box: MiniUni™ Tank Base with silicone gasket Wall bracket and wall support Wall bracket safety pin Composite T.C. adapter 4" to 34mm Airlock, 3-piece with holder 4" tri-clamp 2" tri-clamp 2" T.C. blind cap T.C. gaskets For User Manuals and support, please follow this link to Brewtools Docs.  

Read more less

Replacement lever collar for Intertap or NukaTap faucets. This beer faucet part threads onto the lever and sits above the friction bonnet. Used to help adjust your tap handle to face forward if it is oriented at an angle when fully threaded onto the faucet lever.

Read more less

Replacement glass manway handle nut for 7 bbl MB Electric Boil Kettle.

Read more less

This blend incorporates multiple Belgian and saison strains to produce pear-like esters backed by spicy, earthy and clove-like flavors and aromas. The cultures encourage complete fermentation in a timely manner and create harmony and complexity throughout its ester and phenol production. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Attenuation: 70-80% Flocculation: Medium Alcohol Tolerance: 5-10% ABV Optimum Fermentation Temp: 68-85°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

Replacement o-ring for the ball valve included with the KegLand Bucket Buddy stainless fermenter. Please note the color of the O-ring recently changed to white/clear. Updated images coming soon. KegLand Part Number: KL29186  

Read more less

Replacement telescopic dip tube for the Nukatap Counter Pressure Bottle Filler.

Read more less

With the rolling base for the 20L Braumeister, you can easily move the unit around your brewing area and lock it in place with the castor brakes. Do your brewing in one area, then wheel it over to where it's more convenient to clean without ever needing to pick the system up. There's plenty of clearance between the rolling base and the Braumeister, which allows you to open the pump for cleaning and dry it after brewing. A reservoir molded into the base will collect drips and splashes, and then you can position it near a drain to unplug and drain the reservoir. Features: Flexible costers with locking brakes Perfect height for mashing, lautering, and cleaning More clearance under the Braumeister for better access to the pump For transferring the wort to the fermenter, we recommend the Wort Pump accessory Drip pan function for catching boiled over wort or cleaning water Molded-in reservoir for retaining water until you're near a drain 3/4" female threaded outlet for mounting a valve if desired (not included) Base is made and molded out of high-quality, easy-to-clean polyethylene 17.71" H x 22.44" Ø   

Read more less

Sight glass with TC 2" (64mm) connectors Length: 3.8" (98 mm) Inside diameter: 1.8" (47.8 mm)

Read more less

Kit contains what you need to carbonate in Brewtools Unitanks using CO2 and a ball lock connector. Contents: Ball Lock Adapter, Gas, TC34mm Carb. stone 4.7" (120 mm), 0.5 micron Gaskets M16 O2/CO2 stone holder for ball lock

Read more less

TC34mm elbow, 45° ID: 16.2mm OD: 19mm

Read more less

Extremely versatile and well fit for IPAs, Pale Ales, Hazys, Stouts, and Lagers Aroma Profile: Citrus, Dank, Earthy, Woody Alpha Acids: 15.0 – 18.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor.  It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 15.0 – 18.0% Beta Acids: 4.5 – 6.0% Total Oil: 2.0 – 4.0%   Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.

Read more less

Dual purpose hops popularly used in American styles including Pale Ales and West Coast IPAs Aroma Profile: Berry, Grapefruit, Pine, Stone Fruit, Tropical Alpha Acids: 18.0 – 24.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor.  It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 18.0 – 24.0% Beta Acids: 6.0 – 9.0% Total Oil: 1.5 – 4.0%   Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.

Read more less

The pressurizable Flex Chamber attaches directly to any 2" butterfly dump valve and can be used for monitoring yeast activity, removing trub, harvesting and storing yeast, and many other tasks. Ball lock adapters can be attached to the 28 mm PCO 1881 threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into the fermenter. 2" tri-clamp, gasket and end cap included. The Flex Chamber is also fully compatible with the Gen 3 FermZilla Tri-Conical fermenters. Please note: never remove the Flex Chamber while your conical is under pressure. Always release pressure before removing the Flex Chamber. 

Read more less

The BrewBuilt Pressure Pack for Brewbuilt Conicals features a unique floating racking tube that can be used for taking samples, keg transfers, or serving finished beer. The Clear Float Technology draws beer from the top down, which means it only pulls the clearest, most sediment-free beer possible. And with the included filter attachment, any floating vegetal matter will be blocked from ever entering the dip tube. Using pressure to draw a sample from the floating dip tube will also eliminate micro-oxidation that can occur with traditional sample valves. Replaces the 4" T.C. end cap on the lid of the BrewBuilt X-Series Uni Conical. The 1.5" T.C. port of the pressure lid can be used for adding dry hops, installing the CoolStix™ for temperature control, or attaching a T.C. pressure relief valve during pressure fermentations. The welded hook underneath the pressure lid can be used to hang bags of hops, oak chips, and other additions. To ferment under pressure, we recommend pairing the Pressure Pack with the Pressure Fermentation Kit. 4" T.C. Pressure Lid w/ 1.5" T.C. Port Gas In & Bev Out ball lock posts Clear Float dip tube Floating Dip Tube Filter Attachment included Welded hook for hanging drawstring bags 1.5" tri-clamp, gasket and end cap included Made from 304 stainless steel Warning! The BrewBuilt Pressure Pack is only designed to be used with BrewBuilt conicals that feature a pressure relief valve built into the lid. Failure to release pressure in the conical before remove fittings or the band clamp could result in injury or death.   

Read more less

The Chilling Coil kit can be used to update the 14 gal Brew Buckets for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller. Features: Thick 5 mm zippered neoprene jacket Immersion chiller coil mounted to 6" TC cap Cap | 3” TC with ½” Blow-Off 3/8" hose barbs on the chiller coil Included hose clamps (for chiller coil), TC Clamps, TC Gaskets Kit not compatible with Brite Tanks, Chronical Series, or Unitanks. Specs: Assembled Dimensions: 30"H x 16.5"W x 16.5"D (on Bucket) Assembled Weight: 30lbs / 13.5kgs (on Bucket)

Read more less

The Chilling Coil kit can be used to update the 7 gal Brew Buckets for temperature control. Then you can add an FTSs Touch kit for use with the Ss Glycol Chiller. Features: Thick 5 mm zippered neoprene jacket Immersion chiller coil mounted to 6" TC cap Cap | 3” TC with ½” Blow-Off and 300mm Thermowell 3/8" hose barbs on the chiller coil 17mm Plug for Brew Bucket Brewmaster Edition Included hose clamps (for chiller coil), TC Clamps, TC Gaskets Kit not compatible with Brite Tanks, Chronical Series, or Unitanks. Specs: Assembled Dimensions: 27.5"H x 13"W x 13"D (on Bucket) Assembled Weight: 22lbs / 10kgs (on Bucket)  

Read more less

Replacement handles for all BrewZilla Gen 4 glass lids. Also compatible with Gen 3.1.1 BrewZilla lids if you want to upgrade. Sold as a set of 2. KegLand Part Number: KL29537

Read more less

Used with Brewtools glycol chiller adapter fittings. 27mm x 16mm x 2.5mm. 2 pieces.

Read more less

Designed to work with the FTSs Touch to heat fermenting wort in colder climates. Includes XT30 Connector - Will not work with legacy FTSs controllers.

Read more less

A properly controlled fermentation temperature is critical to producing quality beer. The now-iconic original Fermentation Temperature Stabilization System (FTSs) resulted from many napkin sketches that applied advanced thermodynamics to traditional brewing practices. The system is elegant in its simplicity and incredibly efficient, yet it was the third product we ever designed at Ss Brewtech, just after the Brew Bucket and Chronical. For an encore performance to the classic FTSs, we wanted to reimagine what homebrewing temperature control could be. Your chill source can be as simple as a cooler with ice or as sophisticated as the Ss Glycol Chiller. If your setup requires temperatures to be corrected both up and down, check out the optional FTSs Touch | Heating Pad. The FTSs Touch is designed to be paired with systems like the Unitank, Chronical BME, and Brite Tank BME, which already have a cooling coil and neoprene jacket. What's Included: FTSs Touch Display FTSs Nub (junction box) FTSs Pump Digital Thermoprobe 3/8" Silicone Tubing FTSs Pump Ice Guard  Silicone Thermoprobe Holder Stand Mount TC Mount Cable/Tubing Management Ties Hose Clamps Power Supply

Read more less