Beer Making
Shop By Collection
-
Brewtools | Inline Oxygenation Kit
An inline oxygenation kit designed to inject oxygen during transfer to fermenter. We recommend placing a sight glass after the TC tee, to keep an eye on the O2 flow. Requires an oxygen tank with a pressure regulator. Included: TC 34mm Tee Barbed O2/CO2 stone holder, 6-10mm tube O2/CO2 stone, 0.5micron. G1/8" threads 3 TC 34mm clamps 1 5-pack of TC 34mm gaskets 1 gasket for the stone
$119.00
-
Brewtools | Stainless Filter Holder | 30mm, M16
Filter holder in stailess steel for use in all temperatures. For 180mmx30mm filters. Holds the Brewtools 30mm filter in place in M16 ball locks or other M16 holders.
$43.00
-
Brewtools | Laser Cut Filter | B80pro
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability. Gap width: 1.3mm Pre-cut hole for weldless fitting to use with future accessories.
$137.00
-
Brewtools | Laser Cut Filter | B40pro
Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability. Gap width: 1.3mm Pre-cut hole for weldless fitting to use with future accessories.
$87.00
-
Brewtools | Laser Cut Filter | B150pro
Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability. Gap width: 1.3mm Pre-cut hole for weldless fitting to use with future accessories.
$149.00
-
Brewtools | Pigtail Coil for Sample Valve
The sample valve coil (Pigtail) reduces foam when drawing samples from a pressurized tank.
$119.00
-
Brewtools | CIP Adapter | 4 in. T.C.
4" CIP adapter with 1/2" MPT threads for CIP spray ball with or without extension pipe. Used for CIP via the 4" port on Brewtools Steam Hats or the F150 Unitank. Fluid input is TC 34mm. Remember 34mm Tri-Clamp and gasket are needed, and also the fitting of choice for connecting fluid input.
$39.00
-
Brewtools | CIP Adapter | 3 in. T.C.
3" CIP adapter with 1/2" MPT threads for CIP spray ball with or without extension pipe. This is the correct size for the Brewtools F40 and F80 Unitanks. Fluid input is TC 34mm. Remember 34mm Tri-Clamp and gasket are needed, and also the fitting of choice for connecting fluid input.
$39.00
-
Brewtools | 3-Way Ball Valve | 34 mm T.C. DN15
Brewtools valves are used to customize the system. All the valves have a T-type ball, which makes it close only the port opposite of the handle direction. All the ports on the valve are 34mm TC and they are made from high quality stainless steel (SS304).
$99.00
-
Brewtools | Gas-In Ball Lock Adapter | 34mm T.C.
Ball Lock adapter (Gas) to TC 34mm. The adapter is made for CMB or other gas-fittings. M16x1.5mm inside threads for accessories. The Gas model is identified with a groove near the TC connector.
$21.00
-
Brewtools | Tri-Clamp Barb | 12mm x 34mm T.C. | 0.47" Barb
TC 34mm to 12mm (0.47") hose barb. Normally used for garden hoses or smaller tubes.
$15.00
-
Brewtools | T.C. Gaskets | 34mm, DN20 | 5-Pack
5x TC-gaskets for use between TC 34mm fittings. DN20 is used where the inner dimensions of the fittings exceeds 16mm. Made from food grade silicone.
$9.00
-
Brewtools | T.C. Gaskets | 34mm, DN15 | 5-Pack
5x TC-gaskets for use between TC 34mm fittings. DN15 is used where the inner dimensions of the fittings is 16mm or less. Made from food grade silicone.
$9.00
-
Brewtools | 2 in. Tri-Clamp
Tri-Clamp for connecting two TC 2" fittings. Gasket is sold separately.
$13.00
-
Brewtools | Temp. Sensor | Inline | M10
Digital (DS18B20) Inline sensor with M10 threads. Used with an inline sensor holder to measure temperature on liquids passing the sensor. Gasket is included.
$59.00
-
Brewtools | Spunding Valve | 34mm Tri-Clamp | 0-2.2 BAR | 0-32 PSI
Spunding valve for manual pressure setting. Adjustable from 0-2.2 bar (0-32 PSI) with a maximum deviation of 0.2 bar. We recommend disassembling the valve and lubricating all silicone parts with silicone grease before use. The polycarbonate glass should not be cleaned with PBW or other caustic chemicals.
$189.00
-
Brewtools | Heating Element | 2 in. Tri-Clamp | 500W, 110V
2" TC Sanitary heating element designed for use in santary applications where ease of cleaning is important. The heating element is designed to get the lowest possible watt density and is very easy to clean. Perfect for use with Brewtools Unitanks with kveik yeast or other high temperature fermentation applications. Can also be used in cominbation with 2" TC pipes for RIMS applications. Note that the product comes without any temperature or power control. The manufacturer does not take responsibility for incorrect use or use with too much power output. A PID-regulator may be needed to maintain accurate temperatures. Diameter: Ø42mm (1.65") Length: ~300mm (~11.8") Included: Heating element Power cable 2 meter
$199.00
-
Brewtools | Heating Element | 2 in. Tri-Clamp | 500W, 230V
2" TC Sanitary heating element designed for use in santary applications where ease of cleaning is important. The heating element is designed to get the lowest possible watt density and is very easy to clean. Perfect for use with Brewtools Unitanks with kveik yeast or other high temperature fermentation applications. Can also be used in cominbation with 2" TC pipes for RIMS applications. Note that the product comes without any temperature or power control. The manufacturer does not take responsibility for incorrect use or use with too much power output. A PID-regulator may be needed to maintain accurate temperatures. Diameter: Ø42mm (1.65") Length: ~300mm (~11.8") Included: Heating element Power cable 2 meter
$209.00
-
Brewtools | Steam Condenser
The Brewtools Steam Condenser fits the Brewtools Steam Hat and uses cold water to cool the steam until it becomes a liquid that runs out of the condenser to a bucket or directly to the drain. The unit is an excellent alternative to a ventilation system. The unit ships with a nozzle that supplies 1.1 liters of water per minute at 4 bar pressure. We also offer other nozzles that offers higher or lower flow depending on the water pressure where the system is used and other factors (sold separately). Included: TC 4" to TC 2" adapter (1 pcs) 20cm straight TC 2" pipe (2 pcs) TC 2" Tee (1 pcs) TC 2" Elbow (1 pcs) TC 2" 1/8" nozzle adapter with TC34mm input (1 pcs) TC 2" to 19mm hose barb adapter (1 pcs) TC 2" Clamp (6 pcs) TC 2" Gasket (6 pcs) 1/8" BSP-T nozzle, 30 degrees, 1.1 liters per minute @ 4 bar (1 pcs) You Will Also Need: Steam hat for your system TC 4" Clamp and gasket Water inlet adapter (TC34mm to hose or garden connector etc) Outlet tube (16x25mm) A TC34mm elbow is recommended for the water inlet Please take not that you need much less power to keep the boil going with this device, and the risk of the wort boiling over is high when too much power is used, so make sure to take the necessary precautions. To sustain the vacuum, the drain tube from the condenser must not have any counterpressure. We recommend draining to a bucket where the tube is not submerged in the water, or suspend the tube directly over a floor drain. For User Manuals and support, please follow this link to Brewtools Docs.
$299.00
-
Brewtools | Steam Hat | B40pro
Brewtools pro steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through when boiling, 2 silicone covered handles and a 4 inch accessory mount on top. The silicone plug for the inspection hole is included. Remember to order clamp and gasket for the top port. For User Manuals and support, please follow this link to Brewtools Docs.
$199.00
-
Brewtools | Steam Hat | B80pro
Brewtools pro steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through when boiling, 2 silicone covered handles and a 4 inch accessory mount on top. The silicone plug for the inspection hole is included. Remember to order clamp and gasket for the top port. For User Manuals and support, please follow this link to Brewtools Docs.
$259.00
-
Brewtools | Steam Hat | B150pro
Brewtools pro steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through when boiling, 2 silicone covered handles and a 4 inch accessory mount on top. The silicone plug for the inspection hole is included. Remember to order clamp and gasket for the top port. For User Manuals and support, please follow this link to Brewtools Docs.
$309.00
-
Brewtools | Trubinator™ | Small
Trubinator is a product for use in your brewing system or boil kettle. During whirlpool, hops and other particles will gather in the middle of the filter, making it possible to pumpe more clean wort to your fermenter. A single wingnut and bolt holds the filter in place, so it's easy to disassemble for cleaning. Diameter: 320mm (12.6") Height: 90mm (3.5") Standard filter: R2x5 For User Manuals and support, please follow this link to Brewtools Docs.
$89.00
-
Brewtools | Trubinator™ | Medium
Trubinator is a product for use in your brewing system or boil kettle. During whirlpool, hops and other particles will gather in the middle of the filter, making it possible to pumpe more clean wort to your fermenter. A single wingnut and bolt holds the filter in place, so it's easy to disassemble for cleaning. Diameter: 420mm (16.5") Height: 90mm (3.5") Standard filter: R2x5 For User Manuals and support, please follow this link to Brewtools Docs.
$129.00
