Beer Making
Shop By Collection
-
KOMOS® | Check Valve | 1/4 in. MPT x 5/16 in. Barb
Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 1/4" or 5/16" ID gas line.
$10.99
-
KOMOS® | Check Valve | 1/4 in. MPT x 1/4 in. Barb
Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 3/16" or 1/4" ID gas line.
$10.99
-
KOMOS® | Stainless Barb | 1/4 in. MPT x 1/4 in. Barb | 2-Pack
Stainless steel barb adapter for 1/4" female pipe thread connections. For use with 3/16" or 1/4" ID tubing. Pack of 2.
$7.69
-
KOMOS® | 1/4 in. MPT x 1/4 in. Flare Adapter | 2-Pack
Adapt 1/4" male pipe thread to 1/4" male flare thread, making any 1/4" FPT fitting compatible with flare fittings or flare threaded Duotight fittings. Made from chrome plated brass.
$7.69
-
Replacement Wrench Set for Cannular Can Seamer
Replacement wrenches that comes included with the Cannular Can Seamer. KegLand Part Number: KL13192
$8.79
-
Cannular Replacement Operation Switch | Momentary Switch | Cannular Pro Semi-Auto
Replacement Operation Switch (Momentary Switch) for Cannular can seamer. This switch is only compatible with the Cannular Pro Semi-Auto unit. NOTE: the switch might be yellow or blue. You can tell the Operation Switch from the Power Switch by testing the button. The Operation Switch can be depressed/pushed in while the Power Switch will only click when pressed. KegLand Part Number: KL16445
$6.59
-
Temp Twister Lid for Bucket Buddy Fermenters | 65L
This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 65L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28110
$43.99
-
Temp Twister Lid for Bucket Buddy Fermenters | 35L
This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 35L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28103
$38.49
-
CMBecker Shank Tailpiece | 10mm (3/8") Barb | Beer Nut Included
The CMBecker International Inline Flow Control 10mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/8". It is slightly smaller than 1/2", but it will fit a 1/2" ID Hose if properly clamped. Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 10mm which is between 1/2" and 3/8". When using with 3/8" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) When using with 1/2" it will be loose, but we have used it with syphon hose and thicker high heat (EJ beverage or silicone) hose. Just make sure you clamp it properly to get a good seal. This will not work with a standard shank, it works with CMBecker shanks
$5.99
-
CMBecker Shank Tailpiece | 7mm (1/4") Barb | Beer Nut Included
The CMBecker Inline Flow Control 7mm Barb is necessary for those looking to use tubing that has an inner diameter of 5/16 or 3/8" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 7mm which is slightly wider than 1/4" at 0.27" This will not work with a standard shank, it works with CMBecker shanks.
$6.49
-
CMBecker Shank Tailpiece | 4mm (5/16") Barb | Beer Nut Included
The CMBecker Inline Flow Control 4mm Barb is necessary for those looking to use tubing that has an inner diameter of 3/16" Use with CMBecker In-Line Flow Control Compensator Stainless steel nipple, only stainless steel touches your beverage Works with CMBecker International shanks. Includes CMBecker beer nut The size is 4mm. When using with 3/16" hose you may need to slightly heat hose (using hot water) to stretch hose over barb (this is how we do it!) Just make sure you clamp it properly to get a good seal This will not work with a standard shank, it works with CMBecker shanks. These seal at two places and do not have a flat end (see photo)
$5.99
-
KegLand Ball Lock Quick Disconnect (QD) | Replacement Seal
Replacement seal for barbed or flareed stainless ball lock quick disconnects from KegLand. Compatible with KEG732, KEG734, KEG745, & KEG746.
$1.09
-
Vista Hop Rhizome
9.1-11.3% AA. Grows well in all climates. Ripe honeydew, papaya and tropical melange, white peach and fleshy pear. Vista hops are the most recent release from the USDA public breeding program. The public hop breeding program is unique in that it exists to broadly benefit the entire hop and brewing industries, whereas private programs look more at explicit private financial gain. The USDA public breeding program bred the genetic hop base on which American craft beer was built: Cascade, Centennial, Cluster. And continues to innovate to adapt towards new DDH hazy, juicy IPA brewer and consumer preferences with releases like Cashmere, Triumph, and now Vista. Rhizomes should be planted immediately for best results. If your area is still experiencing frost then you can plant them in a planter indoors until it is safe to transplant outside. The first years crop will generally be smaller than subsequent years. Since these are live plants, we cannot guarantee they will grow, so we recommend buying two of each type to help ensure their success. Shipping Restrictions: Due to agricultural restrictions, we can only ship rhizomes to addresses that are in the United States, excepting Hawaii, Oregon, Washington, and the counties of Bonner and Kootenai in Idaho. Unfortunately, we cannot ship these to international locations including APO/FPO addresses.
$6.99
-
Replacement Actuator Pin for KegLand Core 360 Mini CO2 Regulator
Replacement Actuator Pin / Thumb Screw Assembly for KegLand Core 360 Mini CO2 Regulator. KegLand Part Number: KL20039
$10.99
-
Replacement Duotight Barb for KegLand Core 360 Mini CO2 Regulator
Replacement Duotight Barb for KegLand Core 360 Mini CO2 Regulator. KegLand Part Number: KL22835
$5.49
-
Replacement FFL Outlet for KegLand Core 360 Mini CO2 Regulator
Replacement FFL Outlet for KegLand Core 360 Mini CO2 Regulator KegLand Part Number: KL22828
$5.49
-
Replacement Seal Kit for KegLand Core 360 Mini CO2 Regulator
Contains the o-rings for the piston, the red inlet washer, MK4 seat assembly o-ring, 2 x barb MFL outlet o-rings and a thumb screw o-ring. For instructions on replacing the seals and/or general maintenance please refer to the product manual below. KegLand Part Number: KL12584
$7.69
-
Solenoid Valve | Duotight Compatible | 12V | 0-115 psi | 6.35 mm
This super handy Solenoid Valve is compatible with 1/4" or 6.35 mm OD PE Water Line or EVABarrier tubing. This size tubing is often used on water filtering systems or reverse osmosis systems, and can be used with an Inline Regulator to drop your mains water pressure if needed. Unlike some other solenoid valves this is a direct acting solenoid valve meaning the solenoid valve can go down to 0 pressure. This makes it quite handy for controlling CO2 flow or other low-pressure gasses. Suitable for pressures up to 115 psi (8 bar) so it will handle water pressure with no problem at all. Made from high-quality metal and POM engineering plastics so it is durable and suitable for contact with a wide range of chemicals and beverages. Specs: Inlet/Outlet: 6.35 mm (1/4") Pressure Rating: 0-115 psi (0-8 Bar) Mode: Normally Closed (NC) Solenoid Coil Voltage: 12V Solenoid Coil Amp Draw: 1.1A KegLand Part Number: KL09478
$10.99 $8.29
-
KOMOS® Double-Wide Drip Tray - 29.5 in. Countertop (Stainless)
This extra-long drip tray is well-suited for the KOMOS Double-Wide kegerator and home bar countertops. Made from stainless steel with a removable grill. Good for up to 8 horizontally mounted draft faucets. Features: Removable grill Made from stainless steel 29.5" L x 6.7" W x 0.9" D
$109.99
-
Asco Root™ – Root Growth Enhancer for Hop Rhizomes
Asco Root™ is a granular slow release extract of cold water seaweed (Ascophyllum nodosum). It greatly helps to aid in root growth and set, stress tolerance, and overall plant health while providing a strong potassium source. It has shown exceptional yield increases in field trials, and provides a great head start to help first year rhizome planting. You will receive a bag to cover the volume need of 5 rhizomes, and it should be planted in the hole with your rhizomes when planting.
$19.99
-
KOMOS® Draft Line Kit
The KOMOS draft line kit includes lengths of EVABarrier draft tubing, the same tubing used in all KOMOS kegerators. Each kit includes beer line and gas line, and Duotight tee fittings to split your gas line (excluding single tap kit). See below for recommended Duotight fittings. EVABarrier tubing is a high-quality double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! The outer barrier gives the tubing a nice stiffness that makes it extremely kink resistant and perfect for use with push-in fittings. The inner wall is an excellent gas barrier, keeping oxygen out and CO2 in. The internal surface of the tubing is extremely smooth, making it difficult for bacteria and microbes to cling to. Kits Include: Beverage line Measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line Measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap kit includes uncut rolls of bev & gas line We recommend cutting bev lines to 5.5-6.5 ft. lengths Gas lines can be cut to whatever length best suits your needs Duotight tee fittings to split gas line (for 2-Tap and higher)
$10.99 $4.99
-
Replacement Table Spacer for Cannular Pro Can Seamer
Replacement table spacer for the Cannular Pro Semi-Auto Can Seamer (CAN110). Suitable for 500mL, 330mL aluminum cans and tin cans. It is not compatible with the manual seamer model (CAN100). KegLand Part Number: KL17879
$27.49
-
Step Drill Bit | Self-Starting | HSS High Speed Steel | Titanium Nitride Coated | 0.15 – 0.78 in.
If you want to install the Temp Twister & Thermowell on your FermZilla's plastic lid, this step drill bit is the recommended tool for the job. Suitable for drilling holes in plastic, wood, stainless steel, and other metals. You can use this drill bit to install valves or bulkheads on a stainless kettle, bore out a hole for a draft shank, or drill out the pilot hole found on many KegLand drip trays. For best results when drilling through metal, make sure to drill slowly (less than 600 rpm). Apply significant pressure behind the drill as you cut through. Cutting lubricant is recommended. Note that fast drill speeds will cause the metal and the bit to heat up which can shorten the lifespan of the drill bit. Specs: Drill Speed: 200-800 RPM Can Drill Hole Sizes: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm Hole Size Range (Imperial): 0.15" – 0.78" Coating: Titanium Nitride Suitable for: Metal, wood, plastic Tip: Self starting tip (no pilot hole required or center punch) KegLand Part Number: KL09447
$10.99
-
Liquid Chalk Markers
This Set of 12 Mini Liquid Chalk Markers utilize water-based pigment ink so you can mark on windows, glass, mirrors, plastic and metal surfaces with ease. The ink won’t wash off in the rain, yet is easy to remove with a damp cloth. For permanent application the markers can also be used on chalkboards for a bold statement. If using the Chalkboard Tap Handle, we recommend using these chalk pens on the back of the tap handle rather than the chalkboard insert. The chalkboard insert is porous and will let the ink set in, whereas the back of the tap handle is smooth and will wipe clean more easily. Each marker has a 1.5 mm bullet tip The markers are ideal for signage and can be used indoor and outdoor The ink is made using a water-based formula and each color is vibrant and opaque This marker contains white colored ink The ink is removable on non-porous surfaces KegLand Item Number: KL20206
$5.49
