Beer Making

Sterile packaged sleeve of 20 empty dishes. For making plates. Not for use in a pressure cooker. These dishes are plastic.  

Read more less

Originating from the village of Grodås in Norway, Espe offers the unique profile of lychee, pear, and tropical fruit cup. The strain bolsters the sweet aromatics of modern IPAs, but is versatile enough for your flagship pale ale or seasonal brew. Espe is most expressive when fermented at 90°F+ (32°C+), but still reveals its character at lower ale-pitching temperatures. Attenuation: 75-80% Flocculation: Medium Alcohol Tolerance: 12% ABV Optimum Fermentation Temp: 68-98°F Cell Count: 225 Billion   Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

Made specifically for whirlpooling, this fitting angles ricrculating wort along the kettle wall for a more efficient whirlpool effect Doubles as a kettle maximizer, allowing you to pull wort from below the depth of your kettle's bottom port Rotate to your preferred pick-up height in the kettle to leave trub behind when transferring to fermenter Compatible with kettles 12" in diameter and larger This unique tri-clamp fitting works perfectly for whirlpooling hops at the end of the boil and doubles as kettle maximizer when transferring out to your fermenter. When recirculating wort through the bottom port, wort will be returned to flow along the kettle wall for a more efficient whirlpool effect, drawing vegetal matter into the center of your kettle. When transferring wort out, the fitting will then pull from the side of the kettle where matter has been cleared, and by angling the end of the tube downwards, you'll be able to pull liquid from below the depth of your kettle's bottom port without the need to tip your vessel. 1.5" tri-clamp Length from T.C. to tube bend: 7" (approx.) Length from tube bend to outlet: 9" (approx.) Made from stainless steel

Read more less

Kettle Maximizer allows you to pull liquor or wort from below the depth of your kettle's bottom port Angle straight down in hot liquor tanks to maximize pick up Rotate to your preferred pick-up height in boil kettles to leave trub behind when transferring to fermenter The tri-clamp maximizer is recommended for boil kettles and hot liquor tanks with 1.5" T.C. bottom ports. This fitting will allow you to pull liquor or wort from below the depth of your kettle's bottom port without the need to tip your vessel. For hot liquor tanks, point the end of the tube straight down to maximize pick up. For boil kettles, you can rotate the maximizer to position the end of the tube at your preferred height above the bottom of the kettle, leaving room for a layer of trub that will be left behind in the kettle when you transfer wort to your fermenter. 1.5" tri-clamp Tube Length: 6.5" Overall Length: 8.18" Made from stainless steel

Read more less

This push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. Triple-scaled to read in psi, bar, and kPa.   Kegland Part number: KL07696  

Read more less

This push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to the BlowTie Diaphragm Spunding Valve (FE960), allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa.   KegLand Part number: KL14816  

Read more less

KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required. Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components. Specifications: Battery Life: More than 2 years (using the mini gauge once a day) Battery Type: CR2032 Auto Battery Saver: automatically turns off after 15 sec Size: 27mm x 27mm (1" x 1") Duotight Stem: 8 mm KegLand Part Number: KL18081 Please note: This gauge is not suitable for measuring pressure of liquids.  It is only for measuring gas pressure.  If liquid gets into the pressure transducer it will damage the gauge.  

Read more less

This matte black tower shank is the ideal match for the NukaTap Stealth Bomber faucet and comes with a Duotight-ready tailpiece. Quickly connect 8 mm OD draft line to the shank by pairing it with DUO100. Please note these shanks are not compatible with Perlick brand faucets. KegLand Part Number: KL20084

Read more less

Used with larger, more robust mini regulators. One canister will push between 1-4 five gallon Cornelius style homebrew kegs, depending on how it is used and the CO2 consumption required. With the 74g adapter piece, these cartridges can be used with the KegLand Core 360 Mini Regulator. 5/8-18 UNF threading Kegland Part Number: KL16889   Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.   

Read more less

Replacement Wort Chiller Tee Hose Secure Nut for The Grainfather.

Read more less

Replacement Wort Chiller Nut for The Grainfather  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Replacement glass lid for G30 Grainfather.

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   These are the internal components of the check valve, which is composed of a ball and spring. These are housed inside the check valve housing.  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The Grainfather - Tap Adapter Set

Read more less

Replacement Brass Tee for The Grainfather  

Read more less

Replacement Thermometer Probe Socket for The Grainfather  

Read more less

Replacement Thermometer Probe Molded Nut for The Grainfather  

Read more less

Replacement Bottom Overflow Tube (Long) & Overflow Outlet for The Grainfather  

Read more less

Replacement Ball Valve Tap for The Grainfather  

Read more less

Replacement Lower Perforated Filter for G30 Grainfather. Does not include seal.

Read more less

Replacement Recirculation Pipe for The Grainfather    

Read more less

Pump Cover for the Grainfather G30 All Grain Brewing System.

Read more less

The Grainfather - Check Valve Housing Part #23 in the anatomy/schematics diagram.

Read more less