Fermentors under 60 Gallons

Lid for the WE507 Bucket, really nice to keep things from falling into the fermenting wine. 20" in Diameter.

Read more less

White FDA approved food grade fermenters for the intitial ferment of wine, especially red wines. 24.25" round by 27.5" tall. (Handles stick out 2.5" on two sides)

Read more less

Half gallon clear glass jug with finger handle molded into glass. Uses 38mm screw tops (sold separately). Bottle Specifications: Capacity: 64 fl Oz Height: 10.4 inches Outside Diameter: 4.8 inches

Read more less

Prevent spillage and overflowing with this uniquely designed funnel with high backsplash. Fits carboy necks.

Read more less

Replaces lid o-ring for all sizes of Fermonster Plastic Carboys.

Read more less

For modifying yourself when making a fermenter or a lid for a grain storage container. Note: This lid is not an air tight seal. There is no gasket in this lid.

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after.  They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system.  Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning.  The Fermonster leaves all these problems behind, and still sells for less than $30.  These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  The smooth ribless walls are a feature that reduces yeast and sediment buildup, and imbedded are volume markers at five, six, and 7 gallons.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  The 7 gallon is a monster of a fermenter, reducing blowoff issues seen with standard carboys.  Glass carboys are fragile, and this is nothing like that.  The hefty plastic construction will hold up to brew day abuse; and while movement is manageable, these can be upgraded with our Carboy Carrier. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is impermeable to Oxygen penetration Volume Markers at 5, 6, and 7 Gallons O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after.  They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system.  Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning.  The Fermonster leaves all these problems behind. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Glass carboys are fragile, and this is nothing like that.  The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.   Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT514). Also compatible with shielded thermowell for digital temperature controller probes (FE622). Speidel Quality Features: Rubber Lid Gaskets: Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 550mm D x 999mm H (21.6" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.  

Read more less

Heavy-duty HDPE plastic fermentation and stoarge tank Made from food-safe materials with extra thick walls to preserve the aroma of your beverage Rotating plastic spigot eliminates the need to use an auto-siphon or racking arm to transfer liquid Wide top port opening for easy cleaning Airlock & stopper included Made in Germany by Speidel The future is here today, and the future is HDPE Fermentation & Storage Tanks from Speidel. Made in Germany from nothing but undyed and food-safe plastic, these tanks are produced with particularly thick walls which preserves the aroma and the alcohol for a markedly long time. The stable carrying handles have been tried and tested for decades and are extremely durable. Are you tired of carboys? Hate siphoning to transfer? Wish you could ferment larger batches in a single container? Sick of lifting 50lbs by a small metal handle? Done with worrying about shattered glass, injury and lost product? Well then have we got the solution for you! These heavy duty plastic tanks offer a fantastic fermentation & storage solution at a great price. Key Features: Heavy duty HDPE construction is durable and resists oxygen transfer. None of the risks of working with glass. Small footprint makes them easy to store - take better advantage of the space you have to dedicate to wine & beer making. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand - say goodbye to your carboy brush! All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot, airlock and stopper. Designed and manufactured in Germany by Speidel, the makers of our legendary commercial wine tanks Suggested Applications: 12L: Perfect for storing small lots and experimental batches or taking some of your beer or wine along with you to your next party. 20L: Ideal for secondary fermentation and storage of 5 gallon batches. 30L: The vessel for fermenting wine kits and 5 gallon batches of beer with plenty of headspace and no need for a blowoff tube. 60L: Perfect for fermenting larger batches of wine or 10 gallon batches of beer in a single container! Only 4" larger in diameter than a 6.5 gallon carboy! 120L: Ferment & Store large batches of anything - your creativity is the only limit! Approximate Dimensions: 10in Diameter x 14in Height (w/out airlock in place). Note - The maximum temperature that these plastic fermenters can handle is 140F. FAQ: Can filled containers be carried by the handles? Depending on the weight—barrels up to 30L are no problem—60L is the limit and should not be carried when completely full. The handles have a weight capacity of 30kg (66 lbs). Is there an upper limit on the alcohol content of the stored liquid? In principle, there is not. However, it should be noted that the higher the alcohol content, the faster the seals and, to a lesser extent, the tank itself will wear out. Up to what temperature can the containers be used? For short periods of time the containers can withstand temperatures of up to 80°C (176°F). This temperature should not be exceeded. For longer periods of time the containers can be used at temperatures up to 60°C (140°F).

Read more less

Silicone gasket to fit our Speidel plastic tank adapters (FE740, FE741, FE742, FE745, FE746).

Read more less

The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version inlcudes spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom for less sediment transfer during racking O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Replaces the spigot and collar that come with our Speidel plastic tanks.

Read more less

A set of replacement pads and washers for The Carboy Cleaner™.  Eventually when your original pads have cleaned enough carboys and kegs, they'll need to be retired and replaced by a set of these new ones! Set of 2 replacement pads and 4 washers for The Carboy Cleaner™.

Read more less

Got a stuck lid on your Fermonster? Get it open much easier with this specially designed lid opener. It easily slides onto the lid and gives you comfortable hand grips to open a stuck lid. Note: We do not recommend using this tool to tighten the lid because the seal is made by the o-ring and not the pressure between the lid and neck.

Read more less

Sansone Fusti tanks are crafted from high-quality stainless steel with welded handles for long-lasting performance and easy transport La Nuova Sansone has been crafting high-quality stainless steel containers in Italy for over 40 years, earning a reputation for exceptional design and quality NSF certified stainless steel spigot available for purchase separately The Sansone Europa model Fusti tank is made from 304 stainless steel with a mirror polish finish and welded handles. La Nuova Sansone has been making high-quality stainless steel containers in Italy for over 40 years, building a reputation for exceptional design and quality. If you intend to use the tank for water dispensing, we highly recommend the Europa-AQ model. This tank undergoes an additional pickling and polishing process that improves corrosion resistance. Specifications: Capacity - 100L (26.4 gal) Diameter - 460mm (18.11") Height - 690mm (27.16") Opening - 230mm (9.05") Empty Weight - 16.9 lbs Outlet - 1/2" BSP NSF Certified Made in Italy Stainless valve sold separately

Read more less

Made in Italy, these are premium glass carboys are set apart from others because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This 6 gallon size works great as a primary fermenter for beer, wine and mead. Our line of Itailan carboy is our top recommendation for glass carboys.    Specifications: Weight: 14.0 pounds each Dimensions 21" x 11" Country of origin: Italy  

Read more less

A 30L (7.9 gal) food-grade plastic bucket. Ideal for all fermentations, but especially ideal for wine kits, beers that tend to have a high krausen (Hefe) and any fermentation that is slightly too large for your 6-gallon pail. These buckets come molded with a threaded hole for a spigot to screw into. Our FE356 spigot threads in perfectly.  Why Polypropylene? These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less flavor carry over from batch to batch. Approximate Dimensions: 15.75" Wide x 16.25" Tall Click here for optional lid (FE357B) or full fermentation kit (FE357). Please note: the spigot hole comes pre-molded into the bucket and needs to be drilled out before installing the spigot. We recommend using a 5/8" drill bit and taking care not to strip the female threads that accept the spigot. The spigot includes a back nut that won't be needed—simply remove the back nut and thread in the spigot with the gasket in between the neck of the spigot and the bucket. The lid forms a very tight seal and requires a decent amount of downward force to lock in place. KegLand Part number: KL01588

Read more less

Plastic lid for FE357A. Includes hole and grommet for airlock. Made from Polypropylene. Why Polypropylene?   These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less favour carry over from batch to batch.   Kegland Part number: KL01571

Read more less

The Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported version includes Spigot for easy racking Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after.  They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system.  Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning.  The Fermonster leaves all these problems behind! These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that.  The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.   Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

Replacement lock nut that comes with the Speidel plastic tanks.

Read more less

Replacement Lid with hole for all sizes of Fermonster Plastic Carboys. The lid was recently redesigned and reinforced to be stronger and prevent cracking issues reported by customers. The design was also updated to improve how the o-ring sits in the lid. Does not include o-ring.

Read more less