ForgeFit
-
ForgeFit® Stainless Tri-Clamp End Cap Reducer | 4" x 1.5"
4" x 1.5" tri-clamp reducer. Made from 304 stainless steel.
$52.49
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 3" x 2.5"
3" x 2.5" tri-clamp concentric reducer. Made from 304 stainless steel.
$29.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 18" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 18" long.
$34.99
-
ForgeFit® Soft Rubber Bumper for Brewery Hose Ends | 1"
This ForgeFit silicone hose bumper protects your fittings and the brewery floor from damage from constantly picking up and dropping the hose end. It also holds the end off the floor to keep it from getting contaminated, and has two large handles so you don't have to grab a hot hose to move it. This bumper requires some forceful stretching to get over the 1.5" TC fitting. 1.49" ID to stretch over most 1" brewery hoses.
$24.99
-
ForgeFit® Stainless Tri-Clamp End Cap | 2.5"
End cap for 2.5" tri-clamp fittings. Made from 304 stainless steel.
$6.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 12" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 12" long.
$26.49
-
ForgeFit® Stainless Tri-Clamp 4-Position Manifold | 1.5"
304-type stainless steel tri-clamp manifold with 1.5" clamp ends. Used for keg filling or wort distribution aplications. 22" L x 3.75" H
$148.49
-
ForgeFit® Stainless Tri-Clamp Hose End | 1" Barb x 1.5" T.C.
This ForgeFit barb hose end is intended for use with 1" professional beverage tubing. This is the same fitting we use on our pre-fabricated beverage hose assemblies. When designing this fitting, we made sure it has all the features we wanted in a barb intended for professional applications. The hose barb has a shoulder to keep the hose from creeping up towards the fitting end. The long barb promotes solid engagement with the hose and the end has a gentle internal taper to transition the product flow smoothly from the fitting to the tubing. 1.5" tri-clamp connection with 1" OD 2.62" long barb. Overall length 3.25". 3A certified 304 stainless.
$32.99
-
ForgeFit® Stainless Beer Thread Adapter | 5/8" Female Beer Thread x 1.5" T.C.
Convert standard 5/8" beer thread to 1.5" tri-clamp. Made from 304 stainless steel.
$17.99
-
ForgeFit® Stainless Ball Valve | 2" T.C. | Rebuild Kit
This rebuild kit includes a 3.5" T.C. Gasket and 3mm x 77mm O-ring to aid in the repair of the ForgeFit 2" T.C. Ball Valve. The 3.5" T.C. Gasket requires a food grade grease for assembly with the FF190 Ball Valve.
$5.49
-
ForgeFit® Stainless Ball Valve | Full Port | 2" T.C.
This 2" tri-clamp ball valve is full port and completely disassembles for easy sanitation. It is perfect for inserting a mixer into a wine tank or for mixing hops in a beer tank. No tools are required for disassembly. Simply turn the valve to the closed position, remove the 3.5" tri-clamp, remove the bottom thumb screw (drain), and tilt the ball out of the socket by rotating the top towards you. Reassemble in reverse order. Use food safe grease on all surfaces. Note: Take care to not allow fermentation inside the valve. Do not open the valve during fermentation. The drain screw can be removed while the valve is closed to drain the valve. 2" tri-clamp 3.5" T.C. assembly Made from 304 stainless steel
$175.99
-
ForgeFit® Stainless Tri-Clamp Elbow | 45° | 1.5"
304-type stainless steel tri-clamp 45° elbow with 1.5" clamp ends.
$27.49
-
Replacement Gasket for ForgeFit® Tri-Clamp Sight Glass - 2 in.
Replacement internal gasket for the ForgeFit 2" T.C. Sight Glass. There is a gasket at both ends of the sight glass, so be sure to order two if you need to replace both gaskets.
$2.99
-
Replacement Gasket for ForgeFit® Tri-Clamp Sight Glass - 1.5 in.
Replacement internal gasket for the ForgeFit 1.5" T.C. Sight Glass. There is a gasket at both ends of the sight glass, so be sure to order two if you need to replace both gaskets.
$2.99
-
ForgeFit® 3 in. Butterfly Valve Gasket
Replacement gasket for the ForgeFit® 3" butterfly valve. We recommend replacing your butterfly gasket at least every 3 years. If you wait until you have a leak, your valve has already been unsanitary for some time.
$6.59
-
ForgeFit® Stainless Tri-Clamp Eccentric Reducer | 3" x 2.5"
3" x 2.5" tri-clamp eccentric reducer. Made from 304 stainless steel.
$32.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 2" T.C. | 24" Long
304-type stainless steel tri-clamp extension tube with 2" clamp ends. 24" long.
$59.49
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 2" T.C. | 18" Long
304-type stainless steel tri-clamp extension tube with 2" clamp ends. 18" long.
$54.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 2" T.C. | 12" Long
304-type stainless steel tri-clamp extension tube with 2" clamp ends. 12" long.
$43.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 2" T.C. | 7" Long
304-type stainless steel tri-clamp extension tube with 2" clamp ends. 7" long.
$29.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 24" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 24" long.
$39.99
-
ForgeFit® Stainless Tri-Clamp Eccentric Reducer | 2" x 1.5"
2" x 1.5" tri-clamp eccentric reducer. Made from 304 stainless steel.
$30.49
