ForgeFit

The most popular choice for sanitary connections. Tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection.  1.5" tri-clamp Made from 304 stainless steel

Read more less

Silicone gasket for 1.5" tri-clamp connection. Temperature rated from -58°F to 446°F.  

Read more less

EPDM gasket for 1.5" tri-clamp connection. Temperature rated from -30°F to 300°F. Use color-coded gaskets for different applications to avoid cross contamination. Available in Black, Red, and Blue. Red is commonly used to mark Brettanomyces rubber in breweries that separate brett from brewing yeasts.

Read more less

End cap for 1.5" tri-clamp fittings. Made from 304 stainless steel.

Read more less

The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 2" tri-clamp Made from 304 stainless steel  

Read more less

Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 10.5" allowing you to draw from roughly 8" above or below the valve level. The arm measures 9.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. Manufactured from 304-type stainless steel with a polished finish. 1.5" tri-clover connection.

Read more less

Teflon gasket for 1.5" tri-clamp connection. Temperature rated from -100°F to 500°F.  

Read more less

Convert 1.5" tri-clamp to 1" barb for connecting 1" ID tubing. Made from 304 stainless steel.

Read more less

Convert 1.5" tri-clamp to 3/4" barb for connecting 3/4" ID tubing. Made from 304 stainless steel.

Read more less

Plunger-style sample valve with 1.5" tri-clamp connection and 1/2" barb. Made from 304 stainless steel.

Read more less

This 1.5" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The plastic handle can be rotated 180° for right or left hand operation.  

Read more less

EPDM gasket for 2" tri-clamp connection. Temperature rated from -30°F to 300°F.  

Read more less

Convert 1.5" tri-clamp to 1/2" Male Pipe Thread. Made from 304 stainless steel.

Read more less

The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 3" tri-clamp Made from 304 stainless steel  

Read more less

Convert 1.5" tri-clamp to 1/2" barb for connecting 1/2" ID tubing. Made from 304 stainless steel.

Read more less

Silicone gasket for 2" tri-clamp connection. Temperature rated from -58°F to 446°F.  

Read more less

2" x 1.5" tri-clamp concentric reducer. Made from 304 stainless steel.

Read more less

Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 14" allowing you to draw from roughly 10" above or below the valve level. The arm measures 13.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. Manufactured from 304-type stainless steel with a polished finish. 2" tri-clover connection.

Read more less

1.5" tri-clamp sight glass. Made from 304 stainless steel. Completely disassembles for easy cleaning. Approximately 6.25" long.

Read more less

Teflon gasket for 2" tri-clamp connection. Temperature rated from -100°F to 500°F.  

Read more less

EPDM gasket for 3" tri-clamp connection. Temperature rated from -30°F to 300°F.  

Read more less

End cap for 2" tri-clamp fittings. Made from 304 stainless steel.

Read more less