Optimize your temperature control setup with our complete range of glycol system accessories. From insulated tubing and quick-disconnect fittings to hose clamps and flow meters, we have everything you need to customize or upgrade your system. Whether you're a home winemaker dialing in a single fermenter or a small winery managing multiple tanks, these reliable components ensure efficient, consistent cooling.
Glycol System Accessories
Shop By Collection
-
Hood Thermowell for 6.5 Gallon Threaded Neck Carboys - 15 in
Designed to work with the Ranco Digital temperature controllers (Johnsons will not fit). These allow you to control the core temperature of your fermentation instead of the air around the carboy. Fits the 6.5 gallon glass carboy with threads Note: The color of the hood you recieve may vary from the hood that is pictured.
$27.49
-
Temperature Sensor for Kreyer Glycol Chillers
Replacement Temperature Sensor for Kreyer Chilly 45, Chilly Max, and MCK units.
$65.99
-
Ranco Digital Two-Stage Temperature Controller - Wired
Now you can easily control two different temperature regulating devices. This all new, two-stage controller comes pre-wired with dual AC outlets. One outlet is controlled by one relay, the other by a second relay. The most common application is to use one stage to heat and the other to cool. This means you can simultaneously control a heater and a cooling device, never having to manually switch between heating and cooling modes. The included sensor probe monitors the temperature while the digital readout displays it in either Fahrenheit or Celsius. The sensor probe is 1/4 in diameter and works well with the Stopper or Coupler Thermowells. Temperature Range of -30 to 220F. Ranco base Model # ETC-112000-000. This controller has two sets of contacts the Normally Open contact is rated at: 115 Volts 208/240 Volts Full-Load Amps 16 Amps 8 Amps Locked Rotor Amps 96 Amps 48 Amps Ressistive Amps 15 Amps 8 Amps Horsepower 1 hp 1 hp The Normally Closed contact is rated at: 115 Volts 208/240 Volts Full-Load Amps 5.8 Amps 2.9 Amps Locked Rotor Amps 34.8 Amps 17.4 Amps Ressistive Amps 5.8 Amps 2.9 Amps Horsepower 1/4 hp 1/4 hp
$219.99
-
MKII Temperature Controller
The MKII temperature controller is a great way to control the temperature of your fermentation. Control both heating and cooling with two plugs on the back and create a temperature profile to step up or down the temperature over time. That ability to program in steps can be handy for wine fermentation or even storage if you want to lower or raise slowly. Features: 0.1 degree accuracy Dual plugs for simultaneous heating & cooling -49°F to 248°F temperature range Fully waterproof temperature probe Programmable temperature profiles Kegland Part number: KL01946
$82.99
-
Anvil Temperature Controller
The Anvil temperature controller is tuned and designed for home brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps! The unique design has an integral male plug on the back allowing it to be to plugged into any 120V wall receptacle greatly reducing cable clutter and eliminating the need to drill holes for mounting. Simply plug your refrigerator or pump into the front and you’re ready to go. The 9.5 ft long sensor cable reaches anywhere you need. We’ve also selected a robust 15A internal relay for long life and more capacity than the competition. All this at one cool price. Features: 120V 15A operation Control temps to +/- 1F Temperature Control Range: 16 - 220°F Fahrenheit display Selectable heat and cool modes (not dual stage) Plugs into any 120V wall receptacle – no mounting holes needed! Reduced cable clutter Plug can be inverted to match your receptacle 9.5 ft sensor cable length 1.5" sensor probe length
$27.49
-
1.5 in. T.C. Thermometer - 3.25 in. Face x 7.5 in. Probe
Stainless steel dial thermometer with 1.5" tri-clamp fitting. Dial face measures 3.25" and reads from 32-220°F (0-100°C). Probe measures 7.5" in length from the T.C. fitting.
$65.99
-
Ranco Hanger Bracket
Tired of your digital controller laying awkwardly in the way? Now there is a solution - hang it up! Our hanger screws into a vertical surface and allows you to hang the controller. The hanger bracket features two posts that fit the mounting holes that are a part of the Ranco Controller. This allows you to hang the unit when in use and the remove the unit when you want to clean. This can be handy when you are cleaning with water and could potentially get the controllers wet. Use it to hang your controller on a refrigerator, fermenter stand, brew system, or whatever else you have dreamed up. This is a custom piece made by MoreBeer!
$18.99
-
Non-Return Kit for Chilly Max Glycol Chillers
Replacement Non-Return Kit for Kreyer Chilly Max glcyol chillers. This kit comes standard on the Chilly Max 50 and Max 90. If your glycol system is positioned below the level of your jackets, heat exchangers or piping system, you may get back flow into the chiller's reservoir when the solenoid valves at all of your tanks are closed and the chiller's pump turns off. This Non-Return kit works with all Kreyer ChillyMax chillers to prevent this situation. The kit includes a one-way check valve which is installed inline on the chiller's outlet, and an electric solenoid valve installed on the chiller's inlet. The solenoid valve is wired to the relay that controls the chiller's pump such that when the pump turns off the valve closes. Simple to install and completely automatic, this kit allows you to keep the chiller's reservoir full and not worry about the placement in relation to the rest of your glycol system. Note: This only works with Chilly Max units. It will not work with any other chillers such as the Chilly 45. For the Chilly 45 Non-Return Kit, click here.
$309.99
-
Digital Oven Thermometer
Simple and easy to use probe thermometer with alarm. The cable on this thermometer isn't waterproof so you shouldn't allow the probe to be fully submerged. If this does occur and you are getting incorrect readings you can place the probe in the oven (leaving the plug outside) and bake for 1 hour at 190C to boil the moisture out of the probe. Broad temperature operating range (0 degrees C / 250 degrees C) High accuracy of 1 degree C (0-100C) 1.5 degree C (100-250C) Temperature display resolution 1 degree Timer range 99min 59sec Timer alarm function High temperature alarm function Celsius and Fahrenheit display option Battery operated 1xAAA
$12.49
-
Non-Return Kit for Chilly 45 Glycol Chiller
If your glycol system is positioned below the level of your jackets, heat exchangers or piping system, you may get back flow into the chiller's reservoir when the solenoid valves at all of your tanks are closed and the chiller's pump turns off. This Non-Return kit works with Kreyer Chilly chillers (25, 35, 45) to prevent this situation. The kit includes a one-way check valve which is installed inline on the chiller's outlet, and an electric solenoid valve installed on the chiller's inlet. The solenoid valve is wired to the relay that controls the chiller's pump such that when the pump turns off the valve closes. Simple to install and completely automatic, this kit allows you to keep the chiller's reservoir full and not worry about the placement in relation to the rest of your glycol system.
$299.99
-
Blichmann Temperature Controller
The Blichmann temperature controller is a simple and easy to use controller for home brewing. Plug it in and start controlling your temps right out of the box! Simply plug your refrigerator or pump into the front and you’re ready to go. This is a direct replacement to the controller found in the Blichmann Fermenator™ Pump & Controller Kit. Features: 120V 15A operation Control temps to +/- 1F Temperature Control Range: 16 - 220°F Fahrenheit display Selectable heat and cool modes (not dual stage) Plugs into any 120V wall receptacle – no mounting holes needed! Reduced cable clutter Plug can be inverted to match your receptacle 9.5 ft sensor cable length 1.5" sensor probe length Please note: this controller is not intended to be used with a heating element.
$27.49
-
RAPT Digital Temperature Controller | WiFi/Bluetooth Enabled | RAPT Portal Compatible
This RAPT wifi connected temperature controller box will enable you to monitor, track and control heating and cooling devices remotely through the internet. Set complex temperature profiles so the temperature will automatically change over time. The color screen clearly displays temperature, graph of future and past temperature settings and makes it much easier to perform profile temperature steps. The RAPT app can be downloaded from the Apple App Store for iPhone or Google Play for Android, or you can access the RAPT portal from any web browser here. This plug and play temperature controller box has two clearly marked blue and red power sockets for heating and cooling so you can control a fridge or heating device at the same time to completely monitor and control the temperature. For untethered probe readings, switch the temp reference to the RAPT Bluetooth Thermometer. PID Included This temp controller box comes with PID heating function often used for higher powered devices. This greatly reduces the chance of scorching and will deliver better temperature control with less fluctuation. Temperature Range The temperature range of this device will enable you to control devices from -4°F to 248°F (-20°C to 120°C). Various Mounting Options This innovative design enables you to panel mount this controller, mount to a hanging point or hook, mount on top of a fridge or brew system. Simply unscrew the mounting plate and switch the mounting to your preferred orientation. RAPT WiFi Compatible This product will connect with the RAPT portal. This portal will enable you to monitor, control and log past temperature and also show a future projection of temperature profiles that you might have running. Specs: WiFi & Bluetooth Enabled Free companion app available for iOS or Android devices Customize temp profiles and view logged data from the RAPT portal via web browser Simple plug and play design with LCD display Adjustable heating/cooling differentials Temp Range: -4–248°F (-20–120°C). Probe Relay Length: 6.5 ft. (2 m) Probe Diameter: 0.15" (4 mm) 110-120V 15A KegLand Part Number: KL26055
$137.99
-
Defrost Kit for Kreyer Fan Unit | MR 135
Defrost Kits are electric heating elements made of a set of thin metallic heating rods that are fitted into the suitable slots, under the coil of the thermo-fan. This layout simplifies the installation and guarantees homogenous dispersion of heat over the entire coil for even defrosting. The Defrost Kit melts the iced condensate, which accumulates on the airways when the fan is used for room cooling with Glycol-water set below the freezing point. Periodical defrosting enables the use of the thermo-fan for setting up cold-rooms, which are kept at low temperatures. The melted condense water drips to the fan's collection tray for drainage. When using a Defrost Kit, it is required to use the FermFlex-Defrost controller, which controls both the fan-valve for cooling and the heating element for defrosting.
$549.99
-
Defrost Kit for Kreyer Fan Unit | MR 75
Defrost Kits are electric heating elements made of a set of thin metallic heating rods that are fitted into the suitable slots, under the coil of the thermo-fan. This layout simplifies the installation and guarantees homogenous dispersion of heat over the entire coil for even defrosting. The Defrost Kit melts the iced condensate, which accumulates on the airways when the fan is used for room cooling with Glycol-water set below the freezing point. Periodical defrosting enables the use of the thermo-fan for setting up cold-rooms, which are kept at low temperatures. The melted condense water drips to the fan's collection tray for drainage. When using a Defrost Kit, it is required to use the FermFlex-Defrost controller, which controls both the fan-valve for cooling and the heating element for defrosting.
$494.99
-
LinkTech High Temp Plastic Female Quick Disconnect (QD) | 3/8" Barb w/ Shutoff Valve
The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects. These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path. O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug. It has a 3/8" Hose Barb on the other end for attaching any 3/8" ID tubing. This QD is equipped with a shutoff valve. When not connected to another QD, this will not allow any flow. While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages. These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems. The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 3/8" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series
$24.99
-
JoinTech Quick Disconnect (QD) | Auto Shutoff | Dry Break | Female QD x 1/2" Barb
Prevents leaks and spills when disconnected, ideal for pressurized systems Handles both hot and sub-zero fluids, from hot transfers to sub-zero glycol mixtures (-40°F to 280°F) Made with high-strength, chemically resistant polyketone plastic body, 316 stainless steel spring, and EPDM O-ring for long-lasting performance JoinTech Connectors offer a premium quick-disconnect solution for high and low-temperature beverage handling. These fittings are suitable for a wide range of applications, from hot transfers to sub-zero glycol mixtures. The connectors feature an automatic shut-off valve that prevents flow when disconnected, making them ideal for hoses used with pumps or glycol systems. Compatible with JoinTech Male QD x 1/2" Male BSPT. Features: Durable, UV-stable black design Automatic shut-off valve Vacuum rating of 60 psi Connections: JoinTech Female QD 13mm barb (0.51") Materials: Body: High-strength, chemically resistant polyketone plastic Spring: 316 stainless steel O-ring: EPDM Specifications: Operating pressure: Vacuum to 60 psi Temperature tolerance: -40°F to 280°F (-40°C to 138°C) Flow path: 3/8" KegLand Part Number: KL41102
$21.99
-
JoinTech Quick Disconnect (QD) | Auto Shutoff | Dry Break | Male QD x 1/2" Male BSPT
Prevents leaks and spills when disconnected, ideal for pressurized systems Handles both hot and sub-zero fluids, from hot transfers to sub-zero glycol mixtures (-40°F to 280°F) Made with high-strength, chemically resistant polyketone plastic body, 316 stainless steel spring, and EPDM O-ring for long-lasting performance JoinTech Connectors offer a premium quick-disconnect solution for high and low-temperature beverage handling. These fittings are suitable for a wide range of applications, from hot transfers to sub-zero glycol mixtures. The connectors feature an automatic shut-off valve that prevents flow when disconnected, making them ideal for hoses used with pumps or glycol systems. Compatible with JoinTech Female QD x 1/2" Barb. Features: Durable, UV-stable black design Automatic shut-off valve Vacuum rating of 60 psi Connections: JoinTech Male QD 1/2" Male BSPT Materials: Body: High-strength, chemically resistant polyketone plastic Spring: 316 stainless steel O-ring: EPDM Specifications: Operating pressure: Vacuum to 60 psi Temperature tolerance: -40°F to 280°F (-40°C to 138°C) Flow path: 3/8" KegLand Part Number: KL41096
$19.99