Inert Gas Wine Transfer System

Allows for easy and efficient gas transfers, ensuring minimal oxygen exposure and preserving the delicate flavors and aromas of your barrel-aged creations! Stainless lock down mechanism to adjust height Compression Silicone Bung to form airtight seal with barrel Adjustable lees pin Transfer wine out of a barrel using inert gas to reduce oxidization with our Gas Transfer Tool. After using most all similar tools on themarket, we took what we liked and disliked and made our own. Obviously we love the price!... but perhaps more impressive is the polished finish and the excellent quality welds. We sell it without a sight-gauge welded in or attached. We found it easier to clean without a welded in place sight-gauge. We also found that most wineries already had other sight-gauges in the winery and did not need it included. Of course it is available as an option, (sight-gauge H664, clamp H652, gasket, h656.) Replacement gaskets and parts in stock and available.   Quality Features Stainless lock down mechanism to adjust height Polished stainless tube Compression Silicone Bung to form airtight seal with barrel Adjustable lees pin Made from 304 stainless steel Specifications 1.5" Tri-Clover Outlet 1/4" Stainless Steel Ball Valve with FPT inlet for inert gas 31" height from lees pin to pictured stopper

Read more less

1" diameter stainless racking tube with 1.5" tri-clover connection and welded in adjustable lees pin. 30 inches of straight tubing. Set the pin height at the bottom of the racking tube to leave lees behind.

Read more less

A nitrogren regulator used for Nitrogen and Argon - it will fit both tanks. A nitrogen regulator has a higher high-pressure gauge than a CO2 regulator. (The starting pressure in a Nitrogen/Argon tank will be about 2200 p.s.i. as opposed to 800 p.s.i for a CO2 tank.) CGA580. Tap-Rite brand nitrogen regulator. 5/16" barb. For more information on using gas for flushing vessels, please refer to MoreWine!'s Guide to Inert Gas in Winemaking

Read more less

These quick disconnects feature 1/4" barbed fittings which can be used with either 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n. For the male side, see our H550A.

Read more less

These quick disconnects feature 1/4" barbed fittings which can be used with either 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n.

Read more less

These quick disconnects feature 1/4" barbed fittings which can be used with either 3/16", 1/4" or 5/16" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n. For the female side, see our H550B.

Read more less

Replacement Internal O-Ring for Gas Transfer Tool Please note: Gasket may be red or black.

Read more less

Replacement silicone barrel sealing bung for gas transfer tool.

Read more less

O Ring for Beer & Gas Line QD (for H550A)

Read more less

Replacement Lees Pin for Gas Transfer Tool

Read more less

Use Nitrogen or Argon for flushing tanks or pushing wine from kegs for topping up barrels or serving Perfect for serving still wine, cold brew coffee, Sangria and premixed cocktails on draft Can be filled with Nitrogen, Argon, or Beer Gas Mix Brand new, high-strength aluminum tank with CGA580 valve Ships empty—fill at a welding shop or swap at your local beer & winemaking supply store Brand new aluminum 22 cubic feet Nitrogen tank made from high strength aluminum alloy and high quality CGA580 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. This is the tank you need for flushing vessels or pushing wine from kegs using either Nitrogen or Argon. Gas flushing is a very useful process for giving added protection to wines by helping to minimize contact with oxygen in your storage containers. Also, wine stored in kegs for either topping up barrels or for serving should be pushed with Nitrogen or Argon rather than CO2 to prevent adding carbonation to your wine (unless you want all your wines to be sparklers!). Generally speaking, we recommend using Argon instead of Nitrogen around your winery, mainly because it is denser than air and so is much more effective when it comes to flushing vessels. Though it is more expensive than Nitrogen, we feel that the added expense is worth it when it comes to protecting our wines. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls DOT approved New high quality CGA-580 valve Light weight compared to steel tanks Rated to 2216 PSI service / 3360 PSI test pressure PSI (allowing for Nitrogen fill) Can also be filled with Argon or Beer Gas Mix (Nitrogen/CO2) NOTE: You will need at Nitrogen/Argon Regulator to go with this tank, a standard CO2 regulator will not work.

Read more less

These quick disconnects feature 3/8" barbed fittings which can be used with 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n.   This is a direct replacement to the Female Quick Disconnect with 3/8" Barbs that is featured on the BrewBuilt CoolStix™.

Read more less

Plastic quick disconnect with 3/8" barb which can be used with either 1/4", 5/16" or 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch on the female QD. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The o-ring is food grade buna-n. This is a non-valved QD. It does not have an internal shut-off like H550A. For the female side, see our H550B.

Read more less