Stocked Wine Tanks

Purpose built for high-quality, small-lot, red wine fermentation Tippable tank allows you to ferment, pump out the juice through the embedded filter screen, and dump remaining skins into your press Manway includes a perforated screen for removing free run Forklift channels allow for easy transportation of the tank around your facility Laser-welded full coverage jacket for cooling or heating Optional Variable Volume Lid Kit available for special order Designed by Speidel and MoreWine! Pro specifically for high-quality, small-lot, red wine fermentation. Modeled after stainless fermentation tanks used in Napa, Sonoma, the North Coast, and elsewhere throughout California but with specific upgrades that set this tank apart. These are tippable tanks which allow you ferment, pump out the juice through the embedded filter screen, and dump remaining skins into your press.  The built in, full-coverage cooling jacket allows for temperature control which is critical for making the very best reds.  An optional variable volume lid allows you to use the tanks for storage after fermentation and can also make extended maceration far more safe.  Quality All the famous quality features German made Speidel tanks are famous for. The 2R finish is the best in the industry and can be cleaned quickly with cold water, saving valuable time during harvest. Amazing weld seams eliminate pockets for bacteria to hide.  Speidel only uses the highest quality stainless steel and offers a 25-year warranty on all tanks.  The marbled outside does not show dirt or smears, always looks good and is visually impressive. Built-In Screen for Free Run Pump Out The manway has a removable screen on the backside.  This allows you to connect to the tri-clamp fitting welded into the manway and pump out all the free run juice before dumping in the press. Alternatively, if you are not going to tip the tank, the manway is still handy for easily removing skins.  The internal perforated screen is discretely mounted on the inside of the manway, allowing it to be out of the way during punch downs. When you swing the door open after the tank is empty, the screen is easily removed for cleaning. Cooling The full coverage cooling jacket allows you to control fermentation temperature for long contact, controlled fermentations. Alternatively in cold environments the jacket allows you to heat.    Useful after Harvest With the built in cooling jacket and an optional variable volume lid, this tank can be used for wine storage after the harvest. This enables the tank to be utilized year round whereas some wineries use their fermentation tanks only during crush season and never again through the rest of the year. Features Stainless forklift Channels 140 x 80 Mash door Perforated screen for removing free run Sampling port Reinforced racking outlet Thermometer Laser-welded full coverage jacket holds pressure to 6 bar / 87psi Speidel IIId (2R) famous 304 stainless interior finish Marbled outside always looks good Flared strengthening rim on top, width of rim approx. 42 mm Optional Variable Volume Lid Kit available for special order Specs 1600L / 422 Gallons Must Capacity at 75% = 316 Gallons or approximately 2 tons of crushed fruit 47in diameter x 65in height (1200mm x 1653mm)  

Read more less

Premium quality laser-welded stainless steel sealed tank wine, beer, spirits, cider, kombucha, and other beverages Cooling jacket covers the entire tank of efficient glycol cooling Top hatch provides a large, convenient opening for adding oak or other additions Conical-shaped complete drainage bottom for maximum product yield and easy cleaning Tri-clamp ferrule ports with thermometer and thermowell combo included Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel beverage storage. We've found that these tanks work well for beer, wine, spirits, cider, and more! Convenient top hatch makes cleaning and oaking easy. Heavy duty sealing mechanism and thick gasket ensure an air tight seal. The tanks will support a few p.s.i. of pressure, however they are not pressure rated or designed to be used under pressure. The inside is finished to Speidel quality standards. Bottom drain fittings are 1.5" Tri-Clamp. Flat bottom tanks do not have legs; conical tanks come standard with legs. Speidel Quality Features: Full Jacket - Equipped with a jacket that covers all accessible areas of the tank and is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control!   Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume.   Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5 in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 2350 L.  Open top, 2435 L Manway Lower Jacket: 2.0 m² (4x 1" MPT connections) Upper Jacket: 2.8 m² (2x 1" MPT connections) Complete Drainage Dish Bottom Reinforced Racking valve 2" TC connections Thermometer and Thermowell Combo included Sample Valve included Tank Dimensions: 1200mm D x 2690mm H (47.2" D x 105.9" H)  

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Pulley rope for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume.   Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted for use with 1.5in TC. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1100 L.  Open top, 1183 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation, and transportation Designed with a palletized base, built-in forklift channels, and a sturdy galvanized cage for easy movement and stacking up to 2-high Made from high-quality 304 stainless steel, ensuring durability and a hygienic environment for fermenting or aging beverages Lid features a 1.5" T.C. ferrule, allowing for the addition of a spunding valve, CIP spray ball, or other accessories Full draining bottom outlet with a 1.5" T.C. butterfly valve for efficient liquid transfer External cooling jacket with 1.5" T.C. inlet and outlet Also available without the cooling jacket Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation and transportation. Crafted from high-quality 304 stainless steel, these tanks ensure an airtight, hygienic environment that preserves the quality of both raw ingredients and finished beverages. The built-in forklift channels and robust outer cage make them easy to move around your facility, even when full, and allow them to be stacked on top of each other 2-high. These tanks feature a wide 15.75" lid opening with a 1.5" tri-clamp ferrule in the lid, allowing you to add a spunding valve for fermentation or CIP spray ball of cleaning. The 1.5" T.C. bottom outlet includes a stainless steel butterfly valve. Stainless steel IBC tote 1,000 L / 265 Gallons / 8.5 bbl capacity 1040L / 275 gallons Nominal Capacity (filled to brim) Welded cooling jacket with 1.5" T.C. In/Out 2mm thick 304 stainless steel Passivated Internal BA finish External satin finish Full draining bottom with 1.5" T.C. butterfly valve Upper lid diameter: 15.75" (400mm) 1.5" T.C. ferrule in lid Palletized base with fork lift slots Galvanized cage 44.6" x 44.6" x 57.4" Please Note: Do not stack more than 2 tanks, even when empty. Only move one tank at a time. Never move stacked tanks whether full or empty. The tank must be handled by means of the forks only from the front side. Never use the forks from the side.  

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Hand crank lifting arm for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 3850 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Hand crank lifting arm for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 2200 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Partial coverage cooling jacket for glycol cooling Swinging manyway door for easy removal of grape skins Pulley rope for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a partial jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Manway - The "red wine" manway allows you to easily remove skins. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1600 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Variable capacity tank well-suited for fermentation, wine aging, kombucha, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Double jacket for glycol cooling Pulley rope for lowering and lifting the floating lid Made in Germany by Speidel We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. Speidel Quality Features: Cooling Jacket - Fermenters are equipped with a double jacket that is designed for an operating pressure of 2.5 to 6 bar. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY410) for complete temperature control! Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartrate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!   Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.   Thickness - Speidel tanks are designed to be the correct thickness for the tank's total volume. Complete Drainage Bottoms - All Speidel tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. *Please note that smaller, flat-bottomed tanks do not feature total drainage bottoms.   Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Tanks up to 1600L capacity are outfitted with 1.5" TC racking outlet and bottom outlet. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings.   Rubber Lid Gaskets - The white rubber gaskets used by Speidel are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines!   Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Features: Volume: Sealed, 1100 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections NW10 fitting for use with Sample Valve or Thermometer and Thermowell Combo (Sample Valve or  Thermometer and Thermowell not included)   Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.    

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.  The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.  Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. Speidel Quality Features Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.  Tank Features: Full Volume of 525 L (138 gal) Perfect for blending two barrels of wine 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo Tank Dimensions: 820mm D x 1466mm H (32.25" D x 57.7" H)

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.  The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.  Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. Speidel Quality Features Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.  Tank Features: Full Volume of 240 L (63.4 gal) Perfect for blending two barrels of wine 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo Tank Dimensions: 550mm D x 1524mm H (21.6" D x 60" H)

Read more less

Please​ note: the primary image is an example image and does not exactly match this tank. See below for features and specifications. Premium quality laser-welded 304 stainless steel closed tank  Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish.  The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure.  Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. Speidel Quality Features Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap.  Tank Features: Full Volume of 100 L (26.4 gal) Perfect for blending two barrels of wine 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo Tank Dimensions: 440mm D x 1141mm H (17.3" D x 45" H)

Read more less

Stainless steel storage rack for Speidel Flat Bottom Tanks 550mm in diameter. Raise your tank off the ground to a comfortable operating height. Compatible with 650L tank GER650VF. Base Height: 15.9"

Read more less

In Stock and Ready to Ship! Speidel’s cuboid tanks are the ideal solution for small spaces. They fit perfectly, have curves that are easy to clean and have flawless weld seams. Both tanks have cooling jackets in L51 Layout with C6 Connection. The 1400L tanks has a 0.7 m² jacket and the 1650L has a 1.1 m² jacket. In a few words: our rectangular models are always first choice! They allow you the perfect utilisation of space and guarantee Speidel’s top quality! Enjoy optimal fit with best hygiene and easy cleaning. Standard Accessories: Tank shell and tank bottom made of AISI 304 stainless steel, surface IIId (2R), marbled outside Tank top made of AISI 316 stainless steel, surface IIId (2R), marbled outside With lifting lugs Base tank from 2,000 mm tank height upwards and stacking tank with ladder safety bow Vaulted, stable tank top with moulded-on forward up-slope for complete filling and ventilation assuring a very small air contact area Moulded connection neck with filling and vent neck, 2" T.C. Free-standing base tank on 4 welded-on stacking legs Sampling Weld-on thread NW 10 DIN 11851 with sealing cap (for the installation of sample tap). Manhole Stable manhole neck seamlessly moulded from the tank shell, 420 x 320 mm, door with butterfly bow and hand wheel. Racking Outlet With welded-on reinforcing plate with 2" tri-clamp connection. Fill Level Weld-on thread NW 10 DIN 11851 with sealing cap including fastening points at tank shell (for the installation of fill level indicator). Bottom Outlet Vaulted, stable tank bottom with integrally moulded forward down-slope for complete draining with moulded connection neck, inhibiting suction effect with bottom 2" T.C. outlet.

Read more less

The FO Variable Volume tank is Speidel's flagship Variable Volume tank for storage. Available in 28 different capacities from 1,100L up to over 15,000L. This preconfigured tank comes with: Racking outlet with a 2 in TC connection Bottom outlet with a 2 in. TC connection Floating lid with transparent sealing hose, air pump and pressure gauge Crane with cable for the floating lid Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L (larger tanks available with special shipping arrangements) 1,100L & 1,650L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks have welded-on mounting points for lid lifting arms. Tanks from 1,650L include a lifting arm; from 2,200L up the arm is winch-operated Click Here for more information on the key features of all Speidel Tanks.

Read more less