Wine Barrel Accessories

Replacement Lees Pin for Gas Transfer Tool

Read more less

A stackable, powder-coated metal barrel rack for storing two 30 gallon barrels. Made from powder coated steel in the USA by Western Square. These racks are stable up to 6  racks high. Dimensions 44.5" W x 24" L x 13.75" H.  Barrels will be raised approximately 11.75" off the ground

Read more less

Most winemakers appreciate the simplicity of using a keg for topping up barrels... apply nitrogen or argon gas pressure and you top up your barrels as needed. The Kegmenter fills this need perfectly with a large 4" TC lid and ball lock posts. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Features: Rated up to 3.5 BAR (50 psi) 4 in tri-clamp lid Ball lock posts built into lid Floating dip tube Pressure Relief Valve Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 10 gallon ferments Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing co2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures As a cellar keg for topping up barrels Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130)   Warning: Always depressurize keg before removing lid. Does not come with spunding valve show in example photo. See FIL42A. Kegland Part number: KL04572

Read more less

#8 stopper - solid. Top diameter 1.59 inches (40.5 mm), bottom diameter 1.31 inches (33 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).  

Read more less

This is our preferred tubing for use in Barrel Topping Systems. Because of its high elasticity this tubing is easy to attach to/detach from barbed fittings without having to cut the tubing to remove it or use hose clamps to install it (in low pressure applications). This feature allows the user to disassemble the tubing set used to deliver the top-up wine for both sanitation as well as cleaning after use. Cleans up easily and does not get stiff at low temperatures. OD is approximately 3/8" Specs: Working Pressure - 20 psi Burst Pressure - 60 psi Platinum Cured

Read more less

#8.5 stopper - solid. Top diameter 1.66 inches (43 mm), bottom diameter 1.43 inches (36 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).

Read more less

Barrel Oxyfresh is great for cleaning out oak barrels or breaking in new barrels. It is much safer and easier to work with than soda ash. Formulated especially for commercial and home wineries.  Directions: Fill barrel halfway with cold water and dissolve 0.2 - 0.6 oz. per gallon of barrel capacity. Agitate to dissolve the product, then top with cold water and loosely bung barrel. Allow barrel to soak for 24 hours prior to draining and rinsing.  Cleans with oxygen; does not contain chlorine, bisulfites, organic compounds or phosphates.  

Read more less

A new take on an old favorite! Most winemakers appreciate the simplicity of using a keg for topping up barrels... apply nitrogen or argon gas pressure and you top up your barrels as needed. Our version of the cellar keg has a couple unique twists, designed after using most others on the market. We start with a brand new 50 Liter Stainless Steel Keg.  We cut out the original valve and weld in a 4" tri-clamp ferrule. Some winemakers have told us they do not need the 4" opening. However, the cost difference between a keg with a 2" or 4" opening is very little, and boy is the 4" opening nice when you want to clean it quick by hand. The larger opening also comes in handy for small producers who may need to add oak staves into a cellar keg for structuring. A unique feature of our Cellar Keg is the 1.5" tri-clamp wine-out connection positioned at a 90 degree angle to the keg. Clamp on a butterfly valve for a consistently sanitary, easy-to-use connection. If you buy a Cellar Keg with a threaded connection the ball-valve that you attach gets contaminated and is hard to clean. Need a little help moving the Cellar Keg from barrel to barrel? Check out this custom-welded Rolling Cart! Features New Stainless steel 50 liter capacity keg 4" opening with Tri-Clamp connection 4" Clamp and gasket included 1.5" Tri-Clamp wine output 1/4" NPT threaded coupler welded into lid for gas connection Pressure relief "blow-off" valve to protect against over pressurizing Typically you will need hardware to connect the gas line and hardware to connect a liquid line to a hand-held barrel filling tool. We have listed all these items in the "you might need" section below. Please note we use 1' of the 1/4" beverage line as gas line(rated to 60psi) to connect to the 1/4" gas barb on the keg. On the end of the one foot connect the quick-disconnect set for an easy way to connect and disconnect your gas line.  

Read more less

The Duotight In-Line Regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718).  Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL15035  

Read more less

Due to high demand, the 2.5  and 5 gal are currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in late October.       The Slimline Torpedo Keg series features a smaller diameter to maximize the space in your kegerator or keezer Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Brand new, all-stainless construction ball lock keg Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Torpedo Kegs too wide? Want to squeeze another keg in your kegerator? The patented design, D794,899, of the Slimline Torpedo Keg is 9% more slim than the classic model with all the same great features. Coming in at about 1/4" thinner than standard Ball Lock Cornelius Kegs, this keg has welded stainless handles and the ability to stack kegs with fittings still in place all at a great price. Quality First Here at MoreBeer! we love nothing more than quality interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. Torpedo kegs are machine welded and exceed our standards for quality. This weld quality is possible because these kegs are made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Taking your keg on the go? Don't leave home without a custom tailored Slimline Torpedo Keg Sleeve! Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel Dimensions:   Height (in.) Diameter (in.) 1.5 Gal 11 8 3/8 2.5 Gal 15 5/8 8 3/8 5 Gal 25 1/2 8 3/8   For a slightly shorter keg, see our Standard Torpedo Kegs!  

Read more less

This stainless 4" tri-clover ball lock lid is a direct replacement to the lid that comes on our kegmenters.  Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty Kegmenter, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the keg.

Read more less

Most winemakers appreciate the simplicity of using a keg for topping up barrels... apply nitrogen or argon gas pressure and you top up your barrels as needed. The Kegmenter fills this need perfectly with a large 4" TC lid and ball lock posts. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Features: Rated up to 3.5 BAR (50 psi) 4 in tri-clamp lid Ball lock posts built into lid Floating dip tube Pressure Relief Valve Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 5 gallon ferments Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing co2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures As a cellar keg for topping up barrels Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130)   Warning: Always depressurize keg before removing lid. Does not include spunding valve shown in example photo. Please see FIL42A. Kegland Part number: KL05906

Read more less

Due to high demand, the 1.5 and 2.5 gal are currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in late October.       Brand new, all-stainless construction ball lock keg Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Set your sights on a brand new Torpedo Keg! The patented, D794,899, sleek all-stainless design represents the pinnacle of quality in ball lock homebrew kegs. With features like welded stainless handles, the ability to stack with fittings in place, amazing quality and a great price we think these kegs will become the standard by which other kegs are measured.    Quality First The first thing we at MoreBeer! check out is interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. These kegs are machine welded and exceed our standards for quality. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. In and Out is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Taking your keg on the go? Don't leave home without a custom fitted Torpedo Keg Sleeve! Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel Dimensions:   Height (in.) Diameter (in.) 1.5 Gal 10.25 9 2.5 Gal 14.75 9 5 Gal 23 9 Please Note: These are about 1/2" wider than standard Ball Lock Cornelius Kegs. Need something a bit slimmer?  Check out our lineup of Slimline Torpedo Kegs!  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. These stainless steel vessels are designed just like a keg but with a large 4" tri-clamp opening at the top and two 2" tri-clamps ports at the bottom. The large 4" opening at the top makes it easy to get inside the keg for cleaning, and the 2" ports at the bottom can be fitted with valves, heating elements, or other TC accessories and fittings. The kegmenter is well suited for use as a fermenter, brite tank, or top-up barrel. The 1 bbl Kegmeneter comes with end caps and clamps to plug the bottom ports, and a pre-drilled 4" cap for the top opening with a stopper and airlock included. You also have the option to use the Ball Lock Post lid with floating dip tube, which can be used for pressure fermentations or transfers. Also a 4" x 2" TC reducer would allow for adding a Reflux or Pot Still for distillation. Also consider the Kegmenter Hop Bong Pressure Pack which allows for oxygen-free dry hopping and also features ball lock posts for Gas & Liquid. Specifications: Volume: 1 bbl (31 gal) Working Pressure: 3 bar (43.5 psi) Made from stainless steel 41" H x 15.5 Ø   Kegland Part number: KL04541  

Read more less

Includes ball lock gas-in quick disconnect (barb), 5 ft of 1/4" ID tubing, and two hose clamps.

Read more less

Most winemakers appreciate the simplicity of using a keg for topping up barrels... apply nitrogen or argon gas pressure and you top up your barrels as needed. The Kegmenter fills this need perfectly with a large 4" TC lid and ball lock posts. The posts are recessed which allows you to stack these kegs up to 4 high. A 4" T.C. end cap with pre drilled hole is also available (H691), which can be paired with a #3 stopper and airlock. Features: Rated up to 3.5 BAR (50 psi) 4 in tri-clamp lid Ball lock posts built into lid Floating dip tube Pressure Relief Valve Stainless steel 1.8 mm thick Use: As a stainless steel fermenter that is easy to clean Great choice for 10 gallon ferments Easy to pressurize the kegmenter after fermentation to push through a filter and into another keg Fermenting under pressure, allowing co2 to exit via the relief valve, reduces esters and fusel alcohol production allowing you to ferment at warmer temperatures As a cellar keg for topping up barrels Distillation - with the addition of a T.C. reducer and condenser (H701 / DS120 / DS130)   Warning: Always depressurize keg before removing lid. Does not come with spunding valve show in example photo. See FIL42A. Kegland Part number: KL04565

Read more less

Replacement barrel plug for the 5L American White Oak Barrel (OAK805). KegLand Part Number: KL14533-5L

Read more less

Powdered citric acid. Adjusts pH, without a large impact in overall flavor.

Read more less

The most advanced Beer Tubing Assembly we offer, featuring EVABarrier double-walled draft tubing and Duotight push-to-connect fittings. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can dispense beer on the go with the same first-class tubing. Includes 5.5 ft. of 4mm ID x 8mm OD EVABarrier, which should give you the perfect back pressure to control foaming issues. The hand held faucet features a Duotight compatible barb so it can connect directly to the Duotight reducer. At the other end is a ball lock quick disconnect with flare Duotight fitting. Inner Diameter - 4 mm (5/32") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up   *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. ** Unit does not come pre-assebmled.  

Read more less

Replacement barrel plug for the 10L American White Oak Barrel (OAK806). KegLand Part Number: KL14533-10L

Read more less

The ideal companion to the MoreWine!® Cellar Keg! This heavy-duty rolling cart is custom welded to fit a stainless steel kegs and a gas cylinder. Easily push a full keg from barrel to barrel and top up as needed. Rather than caster wheels, this rolling cart features flat-free polyurethane foam wheels that provide excellent shock absorption and won't go flat if punctured. Perfect for rolling over uneven surfaces, and you can rest assured you won't damage the wheels if they come into contact with sharp edges or debris around your winery. Your tools are never out of reach thanks to the removable accessory tray located in front of the handle bar. Hooks on either side are perfect for routing your gas lines from cylinder to cellar keg, or hanging additional accessories you may need to complete your task. Custom-welded stainless steel frame Flat-free foam tires Fits all full-diameter kegs 50L Cellar Keg 7.75- & 15.5-gal Yeast Brinks 1/2 bbl Sanke & short 1/4 bbl Sanke 1 bbl Fermentation Keg Double-ring bracket for small Nitrogen or CO2 bottle Handle bar allows for easily lifting the wheels over hoses

Read more less

The KOMOS Homebrew keg is the perfect option for beer, cold brew coffee, kombucha, cider, or any other beverage you want to serve under pressure. Built in an ISO 9001-certified facility and made from beverage-grade 304 stainless steel with robotically welded seams. Features a single steel handle and rubber boot at the bottom, so they're easy to move around and won't damage floors, and they can be stacked on top of other homebrew kegs with a rubber top. The lid's pull ring PRV provides both manual and automatic pressure relief. Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams Single Ergonomic Steel Handle Rubber Boot Bottom ISO9001 Quality Assurance NSF Approved Made from 304 Stainless Steel 25.25" H x 8.75" D  

Read more less