Wine Making Crush Additives

Potassium Metabisulfite, (often referred to as "SO2", "sulfites" "meta", or "meta-bi") has several uses in winemaking. At the crush, sulfites are generally used to help control the spoilage bacteria and indigenous yeast that may already be present both on the fruit and in the winery (i.e. on the picking bins, processing equipment, tanks, tubing, etc). The amount generally used is enough to inhibit most of the unwanted organisms but not enough to hinder a cultured yeast, which has a higher tolerance to sulfites than most of the indigenous organisms do. This inhibition effectively "wipes the slate clean" for the cultured yeast to step in and rapidly colonize the must so that it can effectively dominate the subsequent fermentation. In addition, sulfites also help to inhibit the enzymatic browning of both musts and finished wines so that all of their delicate complexities can be preserved. Later, during storage and in the bottle, sulfites at the proper levels will further protect a wine by continuing to inhibit spoilage organisms, as well as by scavenging oxygen. Note that the exact amount needed to effectively do the job is determined by the pH of the wine. Refer to our MoreManuals! on Red or White Winemaking or one of the winemaking books that we offer for a complete explanation on how to properly manage sulfites. In addition, it's important to keep in mind that free SO2 levels fall faster in wood cooperage than in glass or stainless, so if you are using a barrel you will most likely need to manage sulfite levels more closely. The most common form of Metabisulfite is as a powder which is fixed with potassium or sodium. 1/4 tsp of Potassium Metabisulfite adds 50ppm to 5 gallons of must. Old Metabisulfite loses potency with time and should be replaced every year to assure that you are getting correct levels. You can use old Metabisulfite to make solutions for sanitizing equipment.

Read more less

OptiRED – Lallemand Yeast Derivative for Color, Body & Tannin Integration in Red Wines Enhances early formation of polysaccharide–polyphenol complexes for more intense, stable color Rounds and smooths tannins to reduce harshness and astringency Builds fuller body and improved mouthfeel without altering varietal expression Can be used at the start or during fermentation for flexible control over tannin structure Outperforms generic inactivated yeast products by delivering high‑molecular‑weight mannoproteins via MEX™ processing OptiRED is a tailored inactivated yeast derivative produced by Lallemand using an innovative MEX™ method that makes high-molecular-weight polysaccharides immediately available in the must. When introduced early during maceration or alcohol fermentation, these compounds complex with freshly released anthocyanins and tannins, protecting color integrity and creating softer, more integrated tannin profiles. The result is a red wine with enhanced intensity, smoother palate, improved structural balance, and longer-term color stability—without over‑manipulating varietal character. This effect is particularly noticeable in light‑ to medium‑bodied reds or in vintages with lower phenolic maturity. Protocol Suspend the recommended dose in 10× its weight of clean must or water. Stir thoroughly to ensure full dispersion, then add at one of these points: • At the beginning of maceration or alcoholic fermentation for enhanced color protection and tannin integration • Toward the end of fermentation to smooth out persistent harshness without affecting initial extraction. Usage Rates Recommended dosage: 20–40 g per hectoliter = 0.2–0.4 g per liter = 0.76–1.5 g per gallon For standard use, 30 g/hL (0.3 g/L or ~1.14 g/gal) provides excellent balance between color enhancement and mouthfeel refinement. For home users a rough approximate of weight is 1 tsp = 2.6 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

Read more less

MoreWine!'s Tartaric Acid is processed naturally in Europe from grapes and is the preferred acid for adjusting acid levels in wine. Be aware that a lot Tartaric Acid available to home winemakers is artificially made, comes from China, and does not integrate into the wine as well. Some of this tartaric includes the designation of "food-grade". Because MoreWine! packages this product you can be assured you are getting the highest winery-grade quality. 3.8g per gallon adjusts acidity by +.1%. As a note: some tartaric acid will drop out of suspension as potassium bitartrate if you are doing any cold stabilization. You might want to re-test total acidity after cold stabilization.

Read more less

Specially formulated enzyme preparation for improved color intensity and stability, greater mouthfeel, and enhanced fruity, floral, spicy flavors in wine. Used primarily in red wines for the aforementioned reasons, it can also be used in white wines for increased extraction (however we recommend Lallzyme C-Max for whites because it helps the solids settle out as well). Based on the activity of a blend of cellulases, hemicellulases, and pectinases, this preparation aids in the extraction, then stabilization of water soluble phenols found in cells of grape skins. A dry, granular product requiring no special storage conditions prior to use. We have used this enzyme on our wine here at MoreWine and found the difference to be nothing short of amazing. Currently only available at MoreWine in this size! To use dissolve Lallzyme EX into a sufficient amount of water (usual ration is 1:100) and add to must with your other additions prior to the onset of fermentation. Dosage is 0.1g Lallzyme per gallon of must. Store dry enzyme at room temperature, around  25 C° (77 F°). Once rehydrated use within a few hours.

Read more less

This product replaces our TAN120 - Tannin VR Supra Enological tannins offer the winemaker the possibility to add refined, highly-bindable tannin to your wine at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency. We offer four types of oenolgical tannins, two for use during fermentation, and two for use during the aging phase. How Fermentation Tannins Work Designed specifically for North American red wine fermentations, Scott'Tan FT Rouge is composed of exotic wood and chestnut tannins. These highly reactive tannins bind with anthocyanins (color compounds) in the first 3-4 days of fermentation. If sufficient natural tannins are not present in must, anthocyanins may precipitate, resulting in a loss of color. Using an enzyme like Lallzyme EX in conjunction with FT Rouge can enhance this binding of color. The continual bonding going on throughout the ferment will also improve the mid palate structure and help either significantly reduce or eliminate vegetal/herbaceous characters. Tannin additions at this early stage prove to be most efficient and are better integrated into the wine. Important!: If being used in conjunction with one another, tannins should be added 6-8 hours after the addition of the enzymes or you run the risk of having the tannins reacting with and removing the enzymes before they have had a chance to do their job!. To Use Sprinkle directly onto must and either mix well with your punch down tool or pump over to ensure thorough mixing. If adding to the wine post-fermentation we recommend allowing 3-6 weeks for full integration before racking, fining, filtering or bottling. Recommended dosage rate: 0.8-1.9 g/gal. Use at an initial rate of 1.3 gram per gallon during punch down/pump over. If you want additional tannin add at a rate of .25 g/gal. A rough approximate of weight is 1 tsp = 2.4 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates. Unopened the shelf life is 5 years at 18ºC(65ºF).

Read more less

A OptiWHITE – Lallemand Yeast Derivative for Freshness, Mouthfeel, and Oxidation Protection in White and Rosé Wines Protects delicate white and rosé wines from oxidation during fermentation Enhances freshness, aroma longevity, and color stability Improves mouthfeel and softness without adding bitterness Reduces the risk of browning and premature aging Outperforms generic inactivated yeasts due to its targeted composition and polysaccharide profile OptiWHITE is a specific yeast derivative developed by Lallemand through a proprietary production method that preserves functional compounds like glutathione precursors and polysaccharides. Added at the beginning of fermentation, OptiWHITE helps protect varietal aromas and prevents oxidative damage in white and rosé wines. This is especially valuable for wines with thiol or terpene-driven profiles, such as Sauvignon Blanc, Riesling, and Muscat. It contributes to a round, full palate with reduced astringency and bitterness, while preserving brightness and youthful aromas through aging. Compared to standard yeast hulls or inactivated yeast products, OptiWHITE delivers a cleaner fermentation environment with more reliable sensory impact. Protocol Add OptiWHITE directly to the juice or must at the beginning of alcoholic fermentation. Disperse in ten times its weight of clean water or must, then mix thoroughly into the tank. Best used before or during the first stages of fermentation. Do not co-add with bentonite or tannins. Usage Rates Recommended dosage: 20–40 grams per hectoliter = 0.2–0.4 grams per liter = 0.76–1.5 grams per gallon For home users a rough approximate of weight is 1 tsp = 3.4 grams  

Read more less

Lallzyme EX-V – Enzyme for Structured Red Wines with Enhanced Color and Tannin Stability Extracts color and tannins with improved integration for wines destined for aging Promotes stable anthocyanin-tannin bonding for long-lasting color Enhances mouthfeel, midpalate weight, and structural balance Improves juice yield and reduces solids through efficient cell wall degradation Balanced enzyme activity supports both extraction and finesse in premium red wines Lallzyme EX-V is a precision enzyme blend developed by Lallemand for red wine fermentations where structure, balance, and ageability are desired. It combines strong pectolytic activity with targeted cellulase and hemicellulase functions to break down grape skin cell walls, facilitating the release of anthocyanins and seed-derived tannins in a controlled, integrative manner. EX-V is ideal for varietals with moderate to firm skins or when crafting red wines intended for barrel aging, as it enhances phenolic complexity without over-extracting bitterness or astringency. Wines fermented with EX-V tend to show refined texture, vivid color, and excellent long-term stability. Comparison to Other Lallemand Maceration Enzymes: Compared to EX, which is best for early-drinking, fruit-forward reds, EX-V is designed for more structured, age-worthy styles with higher tannin and color stability.  EX = softer, fruit-driven reds for early release EX-V = structured, balanced reds with aging potential Protocol Dilute Lallzyme EX-V in 10 times its weight of chlorine-free water. Add to crushed grapes or must at the beginning of fermentation. Mix thoroughly for even dispersion. Optimal temperature range: 20–30°C. Avoid adding below 10°C or after alcoholic fermentation begins. Usage Rates Recommended dosage: 30–40 grams per ton of grapes = 0.66–0.88 grams per hectoliter (assuming 450 L/ton) = 0.0066–0.0088 grams per liter = 0.025–0.033 grams per gallon Use the lower end of the range for moderately structured fruit or extended maceration. Use the higher range for tighter-skinned grapes, shorter fermentations, or when greater phenolic extraction and color stability are required for barrel-aged or long-lived reds.

Read more less

This product replaces our TAN150 - Tannin Galalcool Enological tannins offer the winemaker, cider maker, or mead maker the possibility to add refined, highly-bindable tannin at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency. We offer four types of oenolgical tannins, two for use during fermentation, and two for use during the aging phase. Protection & Improved Structure! Designed for white/rose wine fermentations (including fruit wines, ciders, and mead), Scott'Tan FT Blanc Soft is a specially formulated, colorless tannin derived from Gall Nuts. When used at the beginning of the fermentation, FT Blanc Soft helps provide protection from oxidation so more of the wines delicate aromas and flavors are preserved. In addition, FT Blanc Soft's continual bonding going on throughout the fermentation improves mouthfeel and help significantly reduce or eliminate vegetal/herbaceous characters and bitterness. FT Blanc Soft imparts a perception of sweetness without contributing any sugars, along with a low-level, beneficial minerality. Note: FT Blanc Soft can also be used as an ageing tannin post-fermentation as well! To Use Add directly to the grapes at the crusher or to the juice/wine. Mix thoroughly to ensure homogenization. Note: If using FT Blanc Soft as an aging tannin, final addition should be made 3-6 weeks before bottling to allow for complete polymerization and settling. Recommended dosage rate: 0.2-0.6 g/gal (5-15 g/hL) A rough approximate of weight is 1 tsp = 2.3 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

Read more less

Used to reduce the hazing effect of pectin's when using real fruit in your beer, wines, or meads. Mix 2 tsp with cold water and add to 5 - 6 gallon of must before the start of fermentation. Enzymes denature above 150 Fahrenheit (approximately) thus if you are doing any heating of your product add them after the product has cooled.  

Read more less

Enhances clarification and static settling of white and rosé musts under extreme conditions Active and fast depectinisation at low temperature, low pH, or high total pectin content Produces rapid, compact lees and improves juice quality consistently Requires lower dosage for effective results compared to standard enzymes Cinnamyl-esterase-free pectinase blend minimizes ethylphenol precursor release Lallzyme C-MAX™ is a micro-granulated pectolytic enzyme derived from Aspergillus niger, formulated for use in white and rosé wine production where settling conditions may be difficult. With high activities of pectin lyase, pectin methyl esterase, and polygalacturonase, it provides fast, efficient breakdown of pectin, even at low temperatures (as low as 8 °C / 46 °F) or low pH. Its action reduces must viscosity, speeds up clarification, and generates compact, easy-to-rack lees. Because it contains no cinnamyl esterase, Lallzyme C-MAX™ also limits the formation of ethylphenol precursors, contributing to cleaner, more varietally expressive wines. Protocol for Use: Add after pressing or directly into the settling tank. Dilute the enzyme in 10 times its weight in water or juice before use. Mix thoroughly for uniform distribution. Do not add bentonite during enzyme treatment. Clarification typically completes within 24 hours depending on temperature and juice conditions. Usage Rates: Standard conditions (>12 °C / 54 °F): 0.5–1.0 g/hL = 0.005–0.01 g/L = 0.019–0.038 g/gal Cold or high-pectin conditions (8–12 °C / 46–54 °F): 1.0–2.0 g/hL = 0.01–0.02 g/L = 0.038–0.076 g/gal Store in original sealed packaging at 5–15 °C (41–59 °F) in a dry place. Suitable for organic and vegan wine production.

Read more less

Lallzyme Cuvee Blanc – Enzyme for Aroma Release and Finesse in White and Sparkling Wines Enhances aroma expression by unlocking bound terpene and thiol precursors Improves clarification and filterability through efficient pectin breakdown Increases finesse and texture by gently releasing polysaccharides Ideal for varietal whites and sparkling base wines where delicacy is key Balanced glycosidase activity preserves freshness without compromising stability Lallzyme Cuvee Blanc is a highly specific enzyme developed by Lallemand for the production of elegant, aromatic white and sparkling wines. It offers a delicate balance of pectinase and glycosidase activity that breaks down grape cell walls to improve clarification while simultaneously releasing aroma precursors trapped in glycosidic form. This selective activity enhances varietal expression—especially in terpene- and thiol-rich varieties—without producing off-flavors or excessive bitterness. The result is a wine with lifted aromatics, better mouthfeel, and improved stability, ideal for styles requiring precision and finesse. Protocol Dilute Lallzyme Cuvee Blanc in 10 times its weight of chlorine-free water. Add to juice or wine at the preferred stage—either pre-fermentation for aroma release and settling, or post-fermentation for finishing and clarification. Ensure even distribution by mixing thoroughly. Optimal temperature range is 12–20°C. Avoid use below 10°C or in combination with bentonite or SO₂ during addition. Usage Rates Recommended dosage: 2–4 grams per hectoliter = 0.02–0.04 grams per liter = 0.076–0.151 grams per gallon Use 2 g/hL for lighter aromatics or wines already showing good varietal character. Increase to 4 g/hL in more neutral juices or when maximizing aromatic potential is desired. Allow adequate contact time—typically 24 to 48 hours—depending on the winemaking stage and style.

Read more less

Scottzyme PEC5L – Pectinase Enzyme for Enhanced Settling and Juice Yield Rapidly breaks down soluble pectins for faster settling and improved clarity Increases free-run and press yield by reducing viscosity and cell wall resistance Improves flotation efficiency and tightens lees compaction Effective across a wide pH range and performs well at low temperatures Ideal for white, rosé, and fruit wines requiring fast clarification and clean separation Scottzyme PEC5L is a highly active liquid pectinase enzyme formulated to reduce pectin-related haze and increase processing efficiency in juice production. By breaking down soluble pectins, PEC5L dramatically improves juice release during pressing, reduces must viscosity, and accelerates settling or flotation. The result is clearer juice, more compact lees, and higher overall yield. Its formulation is optimized for cool-temperature performance and a broad pH range, making it a versatile tool in grape and non-grape juice clarification. Unlike general pectinases, PEC5L is designed to act quickly and cleanly, without over-extraction of phenolics or bitterness. Protocol Dilute Scottzyme PEC5L in 10 times its volume of chlorine-free water or juice. Add to must or juice immediately after crushing or during transfer to settling tank. Mix well to ensure even distribution. For flotation, add just before or during the flotation process. Avoid adding at the same time as SO₂ or bentonite. Usage Rates Recommended dosage: 1.5–4.0 mL per 1000 lb of fruit or 0.075–0.2 mL per gallon of juice = approximately 0.02–0.05 mL per liter Use lower rates for clean, low-pectin fruit or warmer temperatures. Use higher rates for pectin-rich grapes, low temperatures, or difficult-to-settle musts. Allow contact time of 2 to 12 hours depending on conditions and desired level of clarification.  

Read more less

Scottzyme HC is a blend of assorted enzymes designed to increase yield in apple, pear, stone fruits, and wetter grapes (such as concords). This enzyme will assist in breaking down the fruit you work with to help extract more flavor and juice, as well as improving filterability and overall clarity. This Scottzyme works best in conjunction with PEC5L.

Read more less

cottzyme KS – High-Power Enzyme for Complex Pectin Breakdown in Red, White, and Problem Wines Breaks down complex, highly esterified pectins that standard pectinases cannot Enhances clarification, settling, and filterability in challenging juices and wines Boosts juice and wine yield by improving extraction from thick-skinned or high-pectin fruit Ideal for problem fermentations or hazy wines that resist fining and filtration Performs well at low temperatures and in a broad pH range Scottzyme KS is a specialized pectolytic enzyme designed to break down complex pectin structures found in high-pectin varietals and difficult ferments. While standard enzymes like PEC5L target simple soluble pectins, KS is formulated with enhanced side-chain cleaving activity that attacks esterified pectins and heavily branched structures. This makes it particularly effective on cultivars like Pinot Gris, Riesling, Gewürztraminer, Muscat, and in juice or wine where haze persists despite prior enzymatic treatment. KS improves clarification, tightens lees, increases press and wine yields, and boosts filtration efficiency—especially in wines that defy typical settling protocols. Comparison to Scottzyme PEC5L: Scottzyme PEC5L is a fast-acting general-purpose pectinase for typical clarification tasks, such as settling and flotation of white and rosé juices. It’s ideal for clean juice production from standard grapes and most fruit wines. In contrast, KS is the go-to choice when PEC5L isn’t enough—it’s stronger on stubborn, esterified pectins and delivers better results with problematic varieties or ferments that remain hazy even after PEC5L. While PEC5L is excellent for fast juice prep, KS excels in the most difficult cases, including post-fermentation haze and challenging press fractions. Protocol Dilute Scottzyme KS in 10 times its volume of chlorine-free water or juice. Add to must, juice, or wine and mix well. Suitable for use before or after fermentation. Do not add simultaneously with bentonite or high SO₂. Works effectively at 10–20°C. Usage Rates Recommended dosage: 1.5–4.0 mL per 1000 lb of fruit or 0.075–0.2 mL per gallon = approximately 0.02–0.05 mL per liter Use lower rates for moderate haze and extended contact time. Use higher rates in cold settling, high-pectin juices, or persistent post-fermentation hazes. Allow 4–24 hours of contact time depending on application.

Read more less

This product replaces our TAN150 - Tannin Galalcool Enological tannins offer the winemaker the possibility to add refined, highly-bindable tannin to your wine at any stage during the process. Benefits can include increased structure and mouthfeel, color stabilization, stability, anti-oxidative qualities, and overall complexity. Tannins can reduce vegetal/herbaceous characteristics and perceived astringency. We offer four types of oenolgical tannins, two for use during fermentation, and two for use during the aging phase. Protection & Improved Structure! Designed for white/rose wine fermentations (including fruit wines and mead), Scott'Tan FT Blanc Soft is a specially formulated, colorless tannin derived from Gall Nuts. When used at the beginning of the fermentation, FT Blanc Soft helps provide protection from oxidation so more of the wines delicate aromas and flavors are preserved. In addition, FT Blanc Soft's continual bonding going on throughout the fermentation improves mouthfeel and help significantly reduce or eliminate vegetal/herbaceous characters and bitterness. FT Blanc Soft imparts a perception of sweetness without contributing any sugars, along with a low-level, beneficial minerality. Note: FT Blanc Soft can also be used as an ageing tannin post-fermentation as well! To Use Add directly to the grapes at the crusher or to the juice/wine. Mix thoroughly to ensure homogenization. Note: If using FT Blanc Soft as an aging tannin, final addition should be made 3-6 weeks before bottling to allow for complete polymerization and settling. Recommended dosage rate: 0.20-0.60 g/gal (5-15 g/hL) A rough approximate of weight is 1 tsp = 2.3 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.

Read more less

Due to high demand, the 50 lb is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Rice Hulls are used to aid in filterability when you are doing all-grain brewing and using a high percentage of wheat or oats and have had lautering problems. They do not impart any flavor to the finished beer. Use at a percentage not greater than 5% of the total grain bill.

Read more less