Wine Making Glassware & Labware

Take temperature readings instantly and from a safe distance with this infrared thermometer gun. Use it to check how close you are to the hot break before your boil, or measure the temp of your empty mash tun and grains to help predict temperature loss when you add strike water and mash in. Dual lasers is an important feature when choosing infrared thermometers because it allows for much higher accuracy. When measuring an object, a dual laser thermometer gun will help you greatly in finding the convergence point of the measured target and spot ratio. This can only be achieved with a dual laser unit. Features: Double Laser pointer for higher accuracy Simple one-handed operation Laser ON/OFF switch Low battery indication LED backlight Reads in °F / °C Automatic shutdown after 15 seconds Display hold, Scan function FCC, CE, ROHS Certified Notes: 1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly. 2. If you want to use boiled water to measure the unit's accuracy, do not allow smoke or water vapor to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.   KegLand Item Number: KL21883  

Read more less

This brew thermometer conveniently clips to the inside of your kettle so you can constantly monitor your mash or boil kettle temps. Features a 2" dial face and 12" stem. Measures from 0–220°F.  

Read more less

If you're new to brewing you'll soon learn that healthy yeast makes better beer. The best place to start with making healthy yeast is to build up their numbers. This compact stir plate works with Erlenmeyer flasks up to 5000mL in size. Depending on the volume of your yeast starter, you can use the adjustment knob to dial in the speed of the stir bar. We recommend using just enough power to keep yeast in suspension, a full vortex isn't really necessary. Stir bar included.   KegLand Part Number: KL05555

Read more less

Capable of reading from 50°F - 550°F degrees. Includes sleeve and is calibratable via a nut on the back of the dial.

Read more less

This weldless thermowell is made from solid 304 stainless steel.  It has a 1/2" BSP thread which is 40mm long (1.57 inches). Includes silicone o-ring, stainless steel slimline nut and also the extra long nut for mounting a thermometer. Kegland Part number: KL01908  

Read more less

Never need batteries again for your High Precision Series Scale. For the American Weigh product AMW LB-501, our MT353. Input: 120V at 60Hz Output: 9V DC at 100mA

Read more less

Made with durable borosilicate 3.3 glass, these Erlenmeyer flasks are suitable for most applications. They feature a heavy-duty beaded rim to help prevent breakage and have easy-to-read graduations. Able to withstand temperatures of -50 to 550 °C (-58 to 1022 °F), they are autoclavable for sterilization. In the lab world, these flasks are known as "Student Grade". Student grade is not the highest grade flasks and will have minor defects. Please note this 125mL flask has a narrow neck compared to our Y402 unit and will not accept a #5 stopper. This unit will need a #3 stopper. Specs: Material: Borosilicate Glass Capacity (mL): 125 Capacity (oz): 4 Min Graduation (mL): 50 Max Graduation (mL): 125 Graduation Interval (mL): 20 Overall Height (in): 4 59/64 Overall Height (cm): 12.5 Top Outside Diameter (mm): 22 Autoclavable: Yes Base Diameter (cm): 7.2 Inside Rim Diameter (mm): 20

Read more less

With 1/2" MPT threads, the Brewmaster dial thermometer is ready to be easily installed on most kettles, mash tuns, and hot liquor tanks. More low profile than it's bigger brother, this unit has a 2" face and 1.875" probe. Measures from 0–220°F. Made from 304 stainless steel. 2” Dial face Waterproof Range: 0-220°F 1/2" MPT

Read more less

For our MT355. Input: 120V at 60Hz Output: 9V DC at 300mA

Read more less

HI731319 is a set of 10 magnetic stir bars that are used with a magnetic stirrer whether independent or built into a meter. Each stir bar is coated with polytetrafluoroethylene (PTFE ) to provide chemical resistance to a wide variety of chemicals including aggressive substances. The HI731319 set of 10 magnetic stir bars made for a variety of applications. Used in a laboratory setting, a magnetic stirrer together with magnetic stir bars continually stir buffers and/or samples to keep them homogeneous. By keeping samples uniform during measurement and titration, erroneous results are eliminated by preventing any temperature gradients or inadequate mixing when chemicals are added to a sample. Chemically resistant PTFE coating Small size (1 " x 0.3 ") 10 piece set  

Read more less

This reagent bottle is made from durable borosilicate perfect for storing anything you need. Borosilicate is great because unlike ordinary glass it won't crack with rapid changes in temperature.

Read more less

BrewBuilt Bi-Metal Thermometers are top-of-the-line measuring instruments, made in the USA by Tel-Tru manufacturing.  Maintain the overall precision of your brew system with these incredibly accurate and generally superior thermometers.  These are produced according to strict standards, comparable to ISO9000 quality, and are set up with an 8 year manufacturers warranty boasting that quality. Bi-metal thermometers are the level of quality you want when a few degree difference results in a completely different malt profile on your beer.  While a bit more expensive, you won't ever mess up a batch because of incorrect temperature readings.  The 2.5" Stem is a perfect balance of being long enough to get accurate readings, while not protruding far enough to get hit by a wandering mash paddle or spoon. Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 3" 304 s/s housing, a hermetically sealed water proof case, glass face, external calibration capabilities, and a unique anti-parallax dial that provides for easy reading. The reading is actually taken from the last 2.5" of the probe. Features: Large 3" Dial Face for easy readings 2.5" Stem perfect for Boil Kettles and HLTs High Grade Stainless Steel Construction and hermetically sealed casing Can be calibrated with 1/16" Allen Wrench (Though should never be needed) Dual Scale Range: 0-220° F, -10 to 100° C Back Connection is 1/2" MPT, stem is 1/4" SS 8 year Manufacturer Warranty  

Read more less

1.5 in Tri-Clamp thermometer. Made for Ss Brewtech's Brewmaster Edition Kettles. Specifications: 1.5 in Tri-Clamp 3 in dial face +/- 1% accuracy Farenheit and Celcius

Read more less

With 1/2" MPT threads, the Brewmaster dial thermometer is ready to be easily installed on most kettles, mash tuns, and hot liquor tanks. The 2" probe takes accurate readings while staying out of the way. Large 3" face is easy to read. Measures from 0–220°F. Made from 304 stainless steel. 3” Dial face Waterproof Range: 0-220°F 1/2" MPT

Read more less

The Tel-Tru SD3 digital thermometer is designed to deliver industry-leading value. It is rugged and dependable for use in sanitary applications, available in NPT or Tri-Clamp configurations to meet customer needs. All models are NIST traceable and include a lithium battery that lasts a minimum of 8 years.* The SD3 meets 3-A Sanitary Standard 74-07 requirements, making it suitable for commercial applications ranging from food & beverage to pharmaceutical or petrochemical, and more. Available with a 2.5" or 4.5" long probe. Heavy-duty 3" 304SS hermetically sealed case Digital sensor for maximum precision Response rate of 1 second 8-year lithium battery* Temperature Range: -67 to 302°F Accuracy: ±0.4°F High-visibility 0.4" tall LCD display 316SS probe Glass lens 1.5" TC connection Made in USA *Battery life expectancy is eight years at normal room temperature.

Read more less

The HI76405 is an electrode holder with a large steel base that holds up to three electrodes in any position. Holds up to 3 electrodes Adjustable arm position Stable steel base The HI76405 cantilever electrode stand features a large and sturdy steel base. The rectangular base provides a great level of strength and stability when adjusting the electrode arm. The electrode arm is able to hold up to three 12 mm diameter or less electrodes. When paired with a multichannel meter, this feature allows simultaneous measurements of a single sample to be performed and viewed. For measurements that require temperature compensation, a Hanna temperature probe can be placed in the electrode holder to obtain accurately compensated readings.    

Read more less

Powdered citric acid. Adjusts pH, without a large impact in overall flavor.

Read more less

This compact dial thermometer comes with a pocket clip protective sleeve so you can keep it easily accessible in your work shirt breast pocket. Reads from 0-220°F. NSF approved. Probe made from stainless steel.

Read more less

The Tel-Tru ND3 digital thermometer is designed to deliver industry-leading value. It is rugged and dependable for use in industrial applications, and is available in a wide range of configurations to meet customer needs. All models are NIST traceable and include a lithium battery that lasts a minimum of 8 years.* Available with a 2.5" or 4" long probe. Heavy-duty 3" 304SS hermetically sealed case Digital sensor for maximum precision Response rate of 1 second 8-year lithium battery* Temperature Range: -67 to 302°F Accuracy: ±0.4°F High-visibility 0.4" tall LCD display 316SS probe Glass lens 1/2" NPT connection Made in USA *Battery life expectancy is eight years at normal room temperature.

Read more less

The HI900125 is a 25 mL burette assembly for the HI901 or HI902C automatic titration systems. The assembly includes the 25 mL syringe, aspiration tubes, and dispensing tubes, complete with blue protection tubes, gaskets, and tube locks. Rotating light block shield Easy to install Chemically resistant materials Clip-Lock™ Exchangeable Burette System With Clip-Lock™ Exchangeable Burette System, it only takes a few seconds to exchange the reagent or titrant burettes to perform a different titration. With conventional titrators, there is a risk of cross-contamination; this specialized system prevents cross-contamination by eliminating the need for purging, cleaning, and refilling the burettes. Simply sliding out the burette and detaching the dispensing tubes from the overhead assembly allows for quick and easy burette exchange. Having several prepared burettes on hand will make the Hanna titration systems the fastest and most versatile on the market. Light Block Shield For applications that require the use of light-sensitive solutions, the burette of the HI900150 features a light block shield that can be rotated in front of the exposed glass. This shield helps prevent degradation of the titrant or reagent being used, ensuring titrations remain accurate each time. Once the HI900150 burette is connected to the dosing pump, the titrator automatically recognizes the burette volume. In addition to the 50 mL burette, Hanna offers 5 mL, 10 mL, and 25 mL burettes for a wide variety of applications. Each burette is made from chemically resistant material, ensuring users many years of trouble-free operation. The HI900150 also comes with an aspiration and dispensing tube. The aspiration tube features a fitting to ensure the titrant or reagent is securely taken up into the burette. The dispensing tube features a fitting on one end and a tapered dispensing tip on the opposite end to ensure the titrant or reagent is accurately dosed into the sample beaker. A durable blue protection tube covers the clear tubing to prevent kinks and to protect light-sensitive solutions from degradation. The aspiration and dispensing tubes also come with a gasket and tube lock, and can easily be replaced on any of the Hanna burette syringes.  

Read more less