Wine Pump Parts & Accessories
-
1/2in. Barb x 1/2in. Thread Plastic Hose Barb
This white plastic swivel fitting is made by Shurflo, manufacturers of our popular H305 Self Priming Diaphragm pump, and is designed specifically to fit with this pump. Features a 1/2" Barb x 1/2" Female Thread swivel fitting, which makes disconnecting your hoses from the pump a snap. Made from NSF Food Grade polypropylene.
$5.49
-
Quick Disconnect (QD) Pre-Filter for Super Transfer Pump
A replacement or spare Pre-Filter for the H308 diaphragm pump. The redesigned pre-filter is easier to remove and reattach with the need for tools, and fully disassembles for cleaning. Fully compatible with pre-2020 Super Transfer pumps that came with the original pre-filter.
$38.49
-
Replacement Pump Head for H308
A replacement pump head for the H308 diaphragm pump, should the diaphragms become worn or get damaged by passing particulate matter through them. Please Note: This pump head does not include the Pre-Filter or the Elbow fittings that are connected to your hoses, those will need to be transferred over from the existing pump head or purchased separately.
$69.99
-
Hose Barb - 1/2" barb, 90 degree elbow for H308
Replacement elbow fitting for the H308 diaphragm pump. This fitting is typically only used on the pump outlet, but can also be placed on the inlet in lieu of the Pre-Filter. Please note that doing so puts the pump head at increased risk of damage from particulate matter.
$4.99
-
Impeller for PMP530 & PMP535 Euro 30 Pumps
Replacement impeller for Euro 30 pump. In documents tab: Position: 12 EnoItalia Item #: E31
$120.99
-
Replacement Feet for H308 Super Transfer Pump
Replacement Feet for H308 Super Transfer Pump.
$3.99
-
Replacement Filter Screen for Quick Disconnect Pre-Filter
The redesigned quick disconnect pre-filter for the H308 Super Transfer pump now features a replaceable filter screen. Pick up a replacement or keep a spare on hand. When your filter mesh screen is past its prime, simply replace the screen rather than replace the whole pre-filter. Please note: this filter screen will only work with the current generation pre-filter. If you purchased the Super Transfer pump before 2020 and have the original pre-filter, you will need to upgrade to the newest version (H308C) to be compatible with this replacement mesh screen.
$14.99
-
Impeller for Euro 20 Pump (EPDM)
Replacement impeller for the Euro 20 pump. In documents tab: Position: 7
$65.99
-
Replacement Screen for Pre-Screen Filter
Replacement Screen for FIL26 and FIL27 pre-screen filters.
$34.99
-
O-Ring for PMP520 - Euro 20
Replacement O-ring for Euro 20 pump. In documents tab: Position: 2
$6.59
-
Body O-Ring for Euro 30 Pumps
Replacement body O-ring for Euro 30 pump. This O ring is slightly smaller than the O-Ring in the head of the PMP530 & PMP535. In Documents Tab: Position: 6 EnoItalia Item #: G2151
$6.59
-
Replacement O-Ring for Super Transfer Pump Pre-Filter
Replacement o-ring for the quick disconnect pre-filter that is used with the Super Transfer Diaphragm Pump.
$4.99
-
Head O-Ring for PMP530 & PMP535 Euro 30 Pumps
Replacement head Oring for Euro 30 pump. This O-Ring is slightly larger than the Body O-Ring. In documents tab: Position: 13 EnoItalia Item #: G8025
$6.59
-
Single Outlet GFCI Adapter
Prevent electrocution! This is the best way to plug in a pump or other brewing or winemaking equipment because it will trip the circuit when any water flows on the ground wire. 15 Amps 1875 Watts 125 VAC 60 Hz.
$15.99
-
Pre-Screen Filter - 3/4 in Inline Barbs
Inline mesh screen filter to pre filter liquids before passing through a pump. Will remove large particles and protect the pump mechanisms from contaminants. Features 3/4 inch barbs on the in and out sides. The clear plastic cover is removable for cleaning or replacement of the screen.
$34.99
-
Replacement Impeller for Euro 60 Must Pump
Flexible rubber impeller for the Euro 60 must pump, PMP565
$208.99
-
Super Sucker Filtered Racking Buoy | Transfer Top Down | Pre-Filter Solids | 10' Silicone Tubing Included
The Filtered Racking Buoy kit allows you to transfer the clearest liquid possible with the Super Sucker Transfer Pump. Whether you're transferring beer or wine, the clearest liquid will always be at the top of the vessel as solids fall out of suspension and settle to the bottom over time. The stainless steel float will position your transfer tubing at the top of the liquid so you can pull from the top down and cease transferring when you get near the sediment. The filter attachment will add a layer of protection for the pump and will leave solids behind in your fermenter or storage tank. Includes: Stainless float (1.75" Ø) Filter attachment 10' length of 3/8" ID silicone tubing (3) hose clamps
$32.99
-
ByPass for PMP100
Can be added to the PMP100 to slow down flow on command. Can reduce flow by up to 25% by taking liquid from the output and redirecting it back to the input. Also good if the pump is encounterin back pressure in your particular set up. Has 1.5" TC connection on both the in and the out.
$164.99
-
Rebuild Kit including replacement seals for PMP100
Complete internal gasket set to rebuild our PMP100 pump. Does not include the impeller.
$27.49
-
EnoItalia Euro 30 Pump | Replacement Mechanical Seal | Fixed + Rotating Seal
Mechanical Seal (Fixed + Rotating) for PMP530, PMP535, and PMP535S Euro 30 Pumps (Pos. 8 & 9) EnoItalia Item #: 7023-30 (G 96148 + G 91452)
$76.99
-
Replacement Mechanical Seal for EnoItalia Euro 60 Pump
Positions #8 and #9 for the Euro 60 wine pump. See the attached diagram.
$137.99
-
Replacement Starting Capacitor for EnoItalia Euro 30 Pumps
For Euro 30 pumps with start switch. Position #16 on the spare parts diagram. See the attached Euro 30 manual.
$49.49
-
Replacement Capacitor for EnoItalia Euro 30 Pumps
Position #15 on the spare parts diagram. See the attached Euro 30 manual.
$38.49
-
Set of Seals for PMP200
Set of Body Seal and Mechanical Seal needed to completely rebuild the pump head. We recommend changing these out at the same time you change your impeller (PMP200A).
$203.99
