Detecting your location...

FastFerment - 7.9 Gallon Conical Fermenter

    Description

    The FastFerment is an affordable conical fermenter that allows a brewer or winemaker to collect sediment in the included collection ball for easy removal. Easy to use and more affordable than stainless steel conicals. 

    During fermentation the bottom valve of the FastFerment is left open so that sediment will fall into the collection ball. After fermentation is over the valve is shut and the collection ball can be removed without introducing oxygen into the FastFerment. Typically with most small conical fermenters if you let trub dump out the bottom air has to come into to replace that volume.  After dumping sediment or trub the collection ball can be reattached and the valve opened again to allow clean yeast to settle into the ball. That yeast can then be used to ferment your next batch of beer. 

    If you are a brewer who likes to do a primary and secondary fermenter having a conical that allows you to avoid that transfer is going to save time and reduce oxidation. Made from HDPE plastic care should be taken when cleaning. Only use a chemical cleaner like PBW and do not use an abrasive cleaning pad that could scratch the interior. 

    Each FastFerment Includes:

    • 7.9 Gallon / 30L Capacity FastFerment Conical
    • Six inch removable threaded top for easy cleaning
    • Wall mounting bracket 
    • One inch bottom valve
    • SS Thermowell for optional temperature monitoring 
    • Half inch PVC tubing and hose clamp
    • Collection Ball
    • Airlock

     

    Measurements:

    Dimensions in wall mount bracket
    Height from bottom of collection ball to top of airlock: 35.5 inches / 90 cm
    Height from bottom of collection ball to top of lid: 32 inches / 81 cm
    Width with mounting bolts: 14.75 inches / 37.5 cm

    Dimensions in optional floor stand
    Overall Height from floor to top of airlock: 37 inches / 94 cm
    Overall Height from floor to top of lid: 33.5 inches / 85 cm
    Width: 14.25 inches / 36cm

     

     

    FastFerment - 7.9 Gallon Conical Fermenter

      Product form

      SKU: FE900

      $89.99

        Free Shipping on orders over $59

        WARNING : This product can expose you to chemicals including Di-n-butyl phthalate (DBP), which is/are known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.

        You're getting the best possible deal on this item, thanks to our Minimum Advertised Price (MAP) policy.

        Description

        The FastFerment is an affordable conical fermenter that allows a brewer or winemaker to collect sediment in the included collection ball for easy removal. Easy to use and more affordable than stainless steel conicals. 

        During fermentation the bottom valve of the FastFerment is left open so that sediment will fall into the collection ball. After fermentation is over the valve is shut and the collection ball can be removed without introducing oxygen into the FastFerment. Typically with most small conical fermenters if you let trub dump out the bottom air has to come into to replace that volume.  After dumping sediment or trub the collection ball can be reattached and the valve opened again to allow clean yeast to settle into the ball. That yeast can then be used to ferment your next batch of beer. 

        If you are a brewer who likes to do a primary and secondary fermenter having a conical that allows you to avoid that transfer is going to save time and reduce oxidation. Made from HDPE plastic care should be taken when cleaning. Only use a chemical cleaner like PBW and do not use an abrasive cleaning pad that could scratch the interior. 

        Each FastFerment Includes:

        • 7.9 Gallon / 30L Capacity FastFerment Conical
        • Six inch removable threaded top for easy cleaning
        • Wall mounting bracket 
        • One inch bottom valve
        • SS Thermowell for optional temperature monitoring 
        • Half inch PVC tubing and hose clamp
        • Collection Ball
        • Airlock

         

        Measurements:

        Dimensions in wall mount bracket
        Height from bottom of collection ball to top of airlock: 35.5 inches / 90 cm
        Height from bottom of collection ball to top of lid: 32 inches / 81 cm
        Width with mounting bolts: 14.75 inches / 37.5 cm

        Dimensions in optional floor stand
        Overall Height from floor to top of airlock: 37 inches / 94 cm
        Overall Height from floor to top of lid: 33.5 inches / 85 cm
        Width: 14.25 inches / 36cm

         

         

        Documents
        How to FastFerment
        Disassemble Union Valve

        Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account