-
Get your brew day started faster with the MB commercial grain mill
-
Differential roller speed applies enough force to open the grain kernels as they pass through the rollers without damaging the husk, improving efficiency and lauter performance
-
Slotted rollers more effectively expose the starchy endosperm inside the kernel compared to knurled rollers
-
Rollers made from steel alloy which is harder and longer lasting than stainless steel
-
0.4mm to 5mm (.016"-0.19") mill gap is easily dialed in with adjustment lever
-
Professional quality grain mill with stainless steel construction throughout
The MB commercial-grade mill can process 1,760 lbs of grain per hour and features large diameter slotted alloy rollers for an excellent crush and long life. This mill can easily power through whatever you throw at it, including barley, wheat, rye, and corn.
Differential Roller Speed
Rotating the rollers at different speeds is the key to a superior crush. Standard grain mills rotate the rollers at the same speed, creating a pinch point between them where the grain kernels are cracked open. Although effective, this can often lead to an excess of flour and damaged grain husks. The MB pro mill drives the rollers at different speeds to apply enough force to open the grain kernels as they pass through the rollers without damaging the husk. This action results in a better crush that will improve efficiency and lauter performance.
Slotted Rollers
Many grain mills feature hardened steel knurled rollers due to the lower cost, but they don't provide the best crush possible. Rather than shredding the grain into submission, slotted rollers (also known as fluted rollers) are more effective at shearing the grain husk to expose the endosperm while leaving the hull intact. The rollers are made from steel alloy which are harder and longer lasting than stainless steel. This roller features a 180mm diameter, which lowers the angle of attack on the kernel and allows the mill pull grain more efficiently.
Professional Quality
The MB Pro Mill is an industrial workhorse and the best value for a commercial mill on the market. The hopper capacity is 25 lbs of grain and large adjustment wheels make for easy gap adjustments. Stainless steel construction throughout, and anchor holes in the feet allow the unit to be bolted to the ground.
Specifications:
-
Processing Speed: approx. 1,760 lbs/hr
-
Hopper Capacity: 25 lbs
-
Voltage: 208V/220V 3-phase motor
-
Power: 3 HP
-
Amperage: 9 amps
-
Mill Gap: 0.4mm - 5mm
-
Mill Roller Size: 180mm diameter, 180mm long
Please Note: The unit will arrive bare without a power cord, plug, or controls to power the motor on or off. You will need an electrician to wire the appropriate power cord and shutoff switch to the motor.
Please Note: This unit REQUIRES 208-220V Three Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician install a fused shutoff and wire directly to the included on/off switch.
This item does not qualify for free shipping.
WARNING
: This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to
www.p65warnings.ca.gov.
