Products

Upgrade any vessel and enjoy monitoring temperature from a safe distance! Gone are the days of opening kettle lids to check wort or mash temperatures! With the new Fermentap Weldless Thermometer, you can now upgrade any existing kettle or keg to read temperature from the outside! The Fermentap Weldless Thermometer has a 2 inch probe, making it ideal for use in your Hot Liquor Tank or Boil Kettle. The 2 inch stem is much shorter than our 6 inch version, making this product a better suite for vessels with immersion heat exchangers. This Weldless Thermometer will work in Kettles & Kegs! The thermometer is our Fermentap Dial Thermometer, and features a hermetically sealed face, all stainless construction, and a fast response to temperature change! Features: Thermometer with 2" Probe and 3" Dial Face. 2" probe is short enough to stay out of the way of Immersion Chillers or heat exchangers. All Stainless Construction. High Temperature Food Grade Silicone Gasket. Will work great with Kettles & Kegs! Requires a 1" hole to be drilled in the vessel for installation. Replaces our WL113.

Read more less

Upgrade any vessel and enjoy monitoring temperature from a safe distance! Gone are the days of opening kettle lids to check wort or mash temperatures! With the new Fermentap Weldless Thermometer, you can now upgrade any existing kettle or keg to read temperature from the outside! The Fermentap Weldless Thermometer has a 6 inch probe, making it ideal for use in your mash tun. The 6 inch stem is positioned more towards the middle of the mash, giving the thermometer probe more exposure resulting in a more accurate reading. This Weldless Thermometer will work in Kettles & Kegs! The thermometer is our Fermentap Dial Thermometer, and features a hermetically sealed face, all stainless construction, and a fast response to temperature change! Features: Thermometer with 6" Probe and 3" Dial Face. 6" probe is long enough to get an accurate reading in Mash. All Stainless Construction. High Temperature Food Grade Silicone Gasket. Will work great with Kettles & Kegs! Requires a 1" hole to be drilled in the vessel for installation. Replaces our WL111.

Read more less

Need clearer wort? Quicker chilling times? Perhaps higher hop utilization during flameout? Achieve all these desires and more, with the new Weldless Whirlpool Arm by Fermentap! Designed for installation underneath the handle of your kettle, this piece of equipment will allow you to achieve a perfect whirlpool in your Boil Kettle. Simply pump your wort from your ball valve, into this piece, which will jet around the inside of the kettle, forming a strong whirlpool. The advantages to a whirlpool are many. It will settle Trub in the center of your kettle, making it easy to pull clear wort from your ball valve. The whirlpool will result in a much higher chilling efficiency if using an immersion chiller, due to the increased turbulation of wort. On top of this, the increased flow will result in higher extraction of hop oils and flavor during flameout additions! The Fermentap Weldless Spigot is made of 100% stainless steel, ensuring it will be used in your brewing for years to come. It features a 1/2" Full Port ball valve and a 1/2" barb. The inner barbed elbow is 3/8". The bulkhead is a specifically engineered piece of stainless, made for brewing! It features a 1/2" MPT outlet for hooking up your ball valve directly, along with FPT on the inside for connection of any brewing accessory you might want! You will need to drill a 1" hole for installation of this weldless spigot. We recommend a Step Drill Bit for this.   Please note: this item is a kit of our Weldless Ball Valve and a MPT x Barb Elbow fitting. You will need to to thread the elbow into the bulkhead after installing it on your kettle.  

Read more less

Stainless 1/2 in MPT Plug. Hollow behind threads

Read more less

This attachement can be used to replace the spigot or the airlock on your Speidel plastic fermenter and give you a 1/2 in. MPT to the outside and a 1/2 in. FPT on the inside. This allows you to attach a variety of components on the inside and outside of your fermenter. This coupling uses the standard speidel lock ring and gasket.

Read more less

Stainless steel 3 way ball valve with 1/2" female BSP at all ends. The T Port configuration has multiple open and closed positions. Please refer to see the function of each handle position. KegLand Part Number: KL15882  

Read more less

Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Please Note: the ball valve may be difficult to turn at first, but it will become less resistant after it is rotated back and forth a couple times.

Read more less

1.5 in TC x 1/2 in. NPT Stainless Ball Valve Features: 3 piece body Made from 304 stainless steel 1/2 in ID valve body 1.5 in TC 1/2 in. female NPT

Read more less

304 grade stainless steel ball valve. Full port for maximum flow rate. 1,000 psi rating for water, oil, or gas. 1/2" BSP female threads at inlet and outlet. KegLand Part Number: KL03681  

Read more less

Heavy duty ball-valve that can be taken apart for easy cleaning. 1/2" female pipe thread inlet and outlet. Made from 304-type stainless steel. Please note that while we sell plenty of these valves we consider our H602 2-piece ball valve easier to take apart and just as easy to sanitize.

Read more less

304 Stainless steel, full port, two piece ball valves that will last for years. Easy to clean with 1/2" FPT on input and output.. High grade 304-stainless made to last with1000psi rating. We've been selling these same valves from the same manufacturer for over 10 years. This is non-locking valve meaning that it does not come with the locking clip. Many users prefer this because you are not constantly lifting the clip to open and close the valve. If you would prefer a ball valve with a locking clip please see the Brewbuilt Ball Valve.  TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and the two PTFE gaskets that form the seal when closed.

Read more less

Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 3/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed.

Read more less

Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 3/8" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed.

Read more less

This ball valve with male and Female Beer Thread (5/8" BSP) is incredibly handy for those wanting to shut off flow of liquid and gas lines on keg couplers or shanks. Highly recommended if you are disconnecting your coupler and not re-attaching to another keg immediately. Made from 304 stainless steel. Kegland Part number: KL00406

Read more less

This stainless ball valve has a PCO 1881 female thread on one side for attaching to the male thread on the FermZilla lid or collection container and a 3/4" BSP Female thread on the other side for attaching other fittings. The 20mm bore (approx.) makes it possible to perform low oxygen dry hopping through the ball valve.  

Read more less

Use this valve with a standard soda bottle as an inexpensive and effective dry hopping solution Attaches to the PCO 1881 threaded port on the FermZilla fermenter's lid Carbonation Cap and Tee Piece can be added to allow for purging the hops with CO2 This really handy stainless adapter ball valve will enable you to connect two PCO 1881 threads with a valve in between. Each side has an integrated O-ring that will seal on the neck of the PCO1881 Thread. Ideally suited to making a dry hop device for FermZilla with a standard soda bottle or PET growler with PCO 1881 threaded neck. As shown in the photo, if you use this stainless ball valve in conjunction with the PCO 1881 Tee Piece and the Carbonation Cap, you will have the added advantage of being able to use CO2 to purge out oxygen from the hops before you dry hop. This assembly makes an inexpensive and very effective dry hopping tool. Please note: Dry hop pellets will require a bit of a shake to get them to fall through the 3/4" bore.  Tapping the PET bottle should be enough to make the hops fall down into the fermenter through the ball valve. KegLand Part Number: KL18074

Read more less

Stainless steel barb fitting. 1/2" female BSP x 13mm barb (0.51"). KegLand Part Number: KL03612  

Read more less

Stainless steel barb fitting. 1/2" male BSP x 13mm barb (0.51"). KegLand Part Number: KL03629  

Read more less

This Stainless Steel BSPP barb will connect any tubing with a 5/16" ID line to any fitting with a 1/4" Female BSPP connection. The barb is slightly oversized at 8mm (0.315") compared to 5/16" (0.3125") which will give you a tighter connection with your tubing. KegLand Part Number: KL06637

Read more less

This Stainless Steel BSPP barb will connect any tubing with a 3/4" ID line to any fitting with a 3/4" Female BSPP connection. The barb is slightly oversized at 20mm (0.78") compared to 3/4" (0.75") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06668  

Read more less

This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644  

Read more less

Stainless steel 1/4" BSP washer. KegLand Part Number: KL13574  

Read more less

Stainless steel 3/8" BSP washer. KegLand Part Number: KL13581  

Read more less

Stainless steel 1/2" BSP washer. KegLand Part Number: KL03698  

Read more less