Products
-
Stainless - 1/4 in. Coupler
Stainless 1/4" Coupler
$6.59
-
Stainless - 1/4 in. FNPT Elbow
Stainless 1/4 in. FNPT Elbow
$5.49
-
$3.29
-
Stainless - 1/4" Ball Valve Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Here at MoreFlavor! we think this ball valve is actually easier to clean than 3-piece ball valves (such as our H602D).
$16.49
-
Stainless - 2 in. T.C. Check Valve (1 PSI)
This is a Stainless Steel one way Check Valve. It has 2" T.C. Fittings on either side, and releases pressure at ~1 p.s.i. Can be used to inhibit a siphon in certain applications, or to vent gas pressure in a tank.
$109.99 $49.99
-
Stainless - 2" T.C. x 1" MPT
Adapts 2" Tri-Clover fitting to 1" Male Pipe Thread. 304-type stainless steel.
$30.99
-
Stainless - 2" TC x 2" Barb
Convert 2" tri-clover fitting to 2" long barb for connection of tubing. 304-type stainless steel.
$27.49
-
Stainless - 2.5" T.C. x 2" T.C. Concentric Reducer
Concentric Reducer from 2.5" to 2" clover clamp. 304-type stainless steel.
$35.49
-
Stainless - 2.5" TC x 2.5" Barb
2.5" Stainless clover clamp x 2.5" Long Barb for hose connection. 304-Type Stainless Steel.
$32.99
-
Stainless - 3/4 in mpt x 3/4 in Barb
3/4 inch mpt and 3/4 inch barb. Made from 304 stainless. Will work on Ss Brewing technologies line of Chronical Fermenters, as well as with many 20x20 cm Plate & Frame Filters.
$6.99
-
Stainless - 3/8" Comp. x 1/2" MPT
A great way to set up a homemade Mash Tun. These fittings are designed to thread into the inside of a bulkhead fitting, and clamp down on a copper or stainless tube to allow for a hard-plumbed false bottom! Simply thread the fitting into your bulkhead, loosen the nut, and slide your tubing in! Tightening down the nut with tubing inside will clamp the internal locking mechanism onto your metal tube, creating a seal, and insuring a happy mash tun, happy beer, and happier drinkers! 304-Type Stainless Steel compression fitting. 1/2" Male Pipe Thread with a 3/8" compression fitting on the other side.
$16.49
-
Stainless - 4 in. T.C. x 2 in. T.C. Concentric Reducer
Stainless steel Tri-Clamp reducer going from 4" T.C. to 2" T.C. Kegland Part Number: KL06156
$54.99
-
Stainless - 5/8" Comp. x 1/2" FPT
304-Type stainless steel compression fitting.
$32.99
-
Stainless - Cross - 1/2" FPT
Stainless Cross, all 4 openings are 1/2" Female Pipe Thread. Max pressure rating of 150 psi.
$7.69
-
Stainless - Elbow - 1/2 in. FPT x 1/2 in. FPT
Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet. Max pressure rating of 150 psi.
$6.09
-
Stainless - Full Coupler (1 in.)
Full Coupler with 1" Female Pipe Thread. Full couplers have threads for insertion from both sides.
$5.49
-
Stainless - Full Coupler - 1/2 in.
Full Coupler with 1/2" Female Pipe Thread. Full couplers have threads for insertion from both sides. 304 stainless. Also used to connect fittings. We use with our polysulphone brewing pump, H315 to connect other fittings like quick disconnects. Length is approximately 1.5" Max pressure rating of 150 psi.
$4.39
-
Stainless - Full Coupler - 1/2 in.(BSPP)
Full Coupler with 1/2" Female British Standard Pipe Parallel Thread. Full couplers have threads for insertion from both sides.
$5.49
-
Stainless - Nipple - 1/2 in. x 1.5 in.
A stainless steel nipple used to combine two fittings with 1/2" FPT threads. There is a 1/2'' space between threads.
$3.29
-
Stainless - T.C. Clamp (2.5 in)
Used to connect two tri-clamp fittings together to make a sanitary connection. 304 stainless steel. For 2.5" tri-clamp fittings.
$10.99
-
Stainless - Tri-Clamp Tee (2")
304-Polished Stainless tee with 2" tri-clamp connections.
$40.99
-
Stainless - Weldless Ball Valve
Do you have a kettle or cooler but would like the ease and convenience of using a ball valve to easily drain liquid? Are you a Do It Yourself Type person? At a fraction of the cost of having a spigot welded into your kettle you can drill a whole and install a weldless ball valve. The problem with most weldless fittings is they are thrown together from assorted hardware. Common issues include leaking and lots of flex when you use the ball valve. These new weldless fittings feature are designed for brewing. There is no comparison to the weldless fittings of yesterday with their rock-solid feel and a solid leak free connection. This unit is also unique in that it feature 1/2" female threads on the inside. This allows you to thread in various other fittings that you can see below. Want to later make a mashtun... no problem just thread in our stainless screen. want to fully drain your boil kettle? No problem, just add our kettle maximizer! This allows for unlimited flexibility. Weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use. Full installation directions included. This product replaces our WL101. Manufactured by Fermentap. You will need to drill a 1" hole in your kettle for installation of this weldless spigot. We recommend a Step Drill Bit for this. For cooler installation instructions, please see "Installing A Weldless Spigot In Your Cooler" under the documents tab.
$38.49
-
Stainless - Weldless Sight Gauge (11 in.)
The Fermentap Weldless Sight Gauge features a glass sight gauge encased in a chrome-plated sheath. All metal parts in contact with the beer are 100% stainless steel, and the gasket is a high temp, food-grade material. You will need to drill a 1" hole in your kettle. This sight gauge features our new Fermentap Bulkhead, which is a beefy bulkhead with a full port hole. This means that you can actually upgrade this setup with a thermometer which will thread into the body, allowing you to check temperature and fluid level off the same upgrade! Features: 11" Sight Gauge is perfect for up to 10 gallon kettles (dependent upon dimensions!). Monitor liquid level visually without opening up your kettle! Extremely useful for HLTs on the top tier of a sculpture. Stainless construction means the product will last for years. Sight Gauge disassembles easily for cleaning. 1/2" FPT on sight gauge base means you can upgrade with a thermometer! Replaces our WL116.
$74.99
-
Stainless - Weldless Sight Gauge (20 in.)
The Fermentap Weldless Sight Gauge features a glass sight gauge encased in a chrome-plated sheath. All metal parts in contact with the beer are 100% stainless steel, and the gasket is a high temp, food-grade material. You will need to drill a 1" hole in your kettle. This sight gauge features our new Fermentap Bulkhead, which is a beefy bulkhead with a full port hole. This means that you can actually upgrade this setup with a thermometer which will thread into the body, allowing you to check temperature and fluid level off the same upgrade! Features: 20" Sight Gauge is perfect for up to 30 gallon kettles(dependent upon dimensions!). Monitor liquid level visually without opening up your kettle! Extremely useful for HLTs on the top tier of a sculpture. Stainless construction means the product will last for years. Sight Gauge disassembles easily for cleaning. 1/2" FPT on sight gauge base means you can upgrade with a thermometer! Replaces our WL126.
$82.99
