Products

Maximize the purity of your distillate with high density spiral prismatic packing Prismatic spiral shape designed to maximize surface area One 500g bag is suitable for filling one 10" long 2" tri-clamp extension tube Take you distillation to the next level with super high density spiral prismatic packing. The packing maximizes the purity of the collected distillate from your reflux still, ensuring the best possible product is collected. The prismatic spiral shape is designed to maximize its surface area helping to separate out fractions in your reflux, resulting in a highly pure and neutral end product. It is not recommended for use with pot stills when producing flavored spirits. Standard spiral prismatic packing is recommended for home-sized columns like the AlcoEngine series. Large size packing is recommended for 4" diameter or larger columns. Note: We recommend soaking and washing the SPP before its first use with a 50:50 mix of vinegar or citric acid and warm to hot water to remove all manufacturing oils. Sizing: The SPP is approximately 3.35mm x 3.45mm. Suitable to fill a 10” x 2” T.C. Extension Tube. One 500g bag of SPP is enough to fill approximately 500 mL (16.9 oz) of volume. The HETP (Height Equivalent to a Theoretical Plate) for this packing is approximately 30mm. That is roughly 33 theoretical plates per meter. KegLand Part Number: KL25706

Read more less

Perfect for stirring the mash or wort. Spoon is 21" in length.

Read more less

24" long stainless steel spoon, great for stirring boiling liquids, mixing in hops, etc.  Features a wide stamped handle, and a hang hole at the end.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. A convenient bolt-together stand made from Stainless Steel to raise your tank off of the ground, allowing for easier sampling, racking, and cleaning! Fits tanks with approximate diameter of 50 cm (19.5".) Will raise your tank approximately 15" off the ground.

Read more less

A convenient bolt-together stand made from Stainless Steel to raise your tank off of the ground, allowing for easier sampling, racking, and cleaning! Fits tanks with approximate diameter of 65 cm (25.6".) Will raise your tank approximately 15" off the ground.

Read more less

A convenient bolt-together stand made from Stainless Steel to raise your tank off of the ground, allowing for easier sampling, racking, and cleaning! Fits tanks with approximate diameter of 80 cm (31.5".) Will raise your tank approximately 15" off the ground.

Read more less

This stainless steel steeping ball is great for making loose leaf tea or adding flavoring ingredients to your kombucha. Measures approximately 2.75" in diameter.  

Read more less

This stainless steel strainer is 10.25" in diameter, and features a double mesh basket with a wooden handle. Great for straining hops, wort, and adjuncts during the brewing process.  

Read more less

Made from 304 stainless steel.

Read more less

Made from 304 stainless steel.

Read more less

3 way stainless steel tee with 1/4 in barbed fittings. Use the tee to split gas lines to push multiple kegs with one CO2 tank.

Read more less

3-way stainless steel tee with 5/16" barbed ends. Use the tee to split gas lines to push multiple kegs with one CO2 tank. KegLand Part Number: KL04442  

Read more less

Extra long 16" stainless steel tongs perfect for grabbing hot things in a boil or for removing sanitized objects from sanitizing solution. Just handy to have in your home brewery. 

Read more less

There's never enough counterspace on brew day. The heavy-duty stainless steel work table is an excellent companion to carry water for you, and with the swivel rolling casters, it will be happy to follow you from station to station around your brewery. With a 400 lb top shelf weight capacity and 300 lb undershelf weight capacity, this humble work table is more than capable of being the Robin to your Batman. This is the very same table featured in the BrewBuilt X2 Jacketed Conical Ultimate Chilling Package. The top shelf is the perfect size for a 7 or 14 gallon X2 Conical, and the undershelf is the perfect hangout for an IceMaster Max 2 Glycol Chiller. The work table will not accommodate a 25 or 38 gallon X2 conical. Specs: Top Shelf Dimensions: 24" x 24" Height: 34" Top shelf Capacity: 400 lb Undershelf Capacity: 300 lb Tabletop made from 18-gauge, 304 stainless steel Undershelf and legs made from galvanized steel

Read more less

Few materials are more durable or more attractive than stainless steel, which is exactly what sets this Stainless Steel Wort Chiller apart from similar chillers. This high quality stainless wort chiller includes 8 feet of vinyl tubing attached to both the in and out using a female garden hose fitting on the “in” side, as well as 25 feet of stainless steel tubing measuring 3/8 inch diameter. Although stainless steel takes a little longer to cool your worth than comparable copper tubing, its advantage is that it won’t tarnish between uses. Stainless steel is also much more affordable than copper, which makes this an economical choice that won’t sacrifice quality or real-world effectiveness. This stainless steel wort chiller also contains a brass hose adapter for an even more attractive, high quality look and feel. The Stainless Steel Wort Chiller 25’ x 3/8” is made entirely in the U.S.  Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. As an upside, these do actually help turbulate the cooling water to eliminate laminar flow (helps increase the cooling capacity).   Product Specifications 25' Stainless tubing 8' Vinyl Tubing Brass Hose Adaptor 10" diameter 8" to the top coil 15" to the bend to go over the lip of the kettle.    

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. An affordable wort chiller made from 50' of 1/2'' Stainless Steel tubing. You can use our CE20 hose thread adaptor to attach to your sink. Uprights are held together by a single hose clamp rather than welding/soldering. Note: The inner bend on the coils  have small indentations that are a natural result of the winding process used during manufacturing. By enlarging the photos you can view.  As a bonus these actually help turbulate the cooling water to eliminate laminar flow. Approx. 12.75" diameter, 12" to the top coil, 23" to the bend to go over the lip of the kettle.

Read more less

1/2" Female thread on one side and 1/2" male thread on the other. Called a street elbow because of the female threads on one side and the male threads on the other. Made from 304 type Stainless Steel.

Read more less

For Making a tighter turn than a regular tail piece would. This stainless steel tailpiece will require 1-5/8" clearance behind the shank. ID - 3/16" OD - 1/4"

Read more less

1/4" Tailpiece Elbow that is used with hex nut (D1740). Requires 1-1/16" clearance. ID - 3/16" OD - 1/4"   Kegland Part number: KL05081

Read more less

3/8" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 5/16" OD - 3/8"  

Read more less

5/16" Tailpiece Elbow that is used with a 1" tailpiece hex nut (D1740 / D1741). Fits on couplers and shanks. Requires 1-5/8" clearance above the coupler or behind the shank. Made from stainless steel. ID - 1/4" OD - 5/16"  

Read more less

With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup. 1/2" Female BSPP on all three openings. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06606  

Read more less

With three places to attach tubing and accessories, this tee gives you the ability to customise your brewing setup. 1/4" Female BSPP on all three openings. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" and 3/4" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06590  

Read more less