Products

TC34mm 90° elbow to 3/8" (10 mm) hose barb Fits 8.5x14mm EVA tubes for glycol For more information on building a cooling system for your Brewtools fermenter, click here.

Read more less

34mm Tri-Clamp 90° elbow with 12mm (0.47") hose barb. Use with 3/8" ID tubing.

Read more less

TC34mm elbow, 90° ID: 16.2mm OD: 19mm

Read more less

Adapter from G3/4" threads to 12mm hose barb. Mainly used with MiniChilly 17 for glycol loops. Gasket sold separately.

Read more less

Adapter from G3/4" threads to TC34mm Mainly used with MiniChilly 17 for glycol loops. Gasket sold separately.

Read more less

The adjustable dip tube allows you to adjust the angle of the dip tube from outside the tank. Useful for adjusting the pump inlet dip tube and also for adjusting the whirlpool return dip tube, to optimize and experiment with different angles during use. Fitted between the valve and the outlet ports on the right and/or left side on the brewing systems. The dip tube should be pulled out of the housing slowly to avoid o-ring damage.

Read more less

2-part airlock with 34mm Tri-Clamp. Perfect for FCS with a solenoid valve or as a simple airlock. Manufactured in transparent polycarbonate.

Read more less

The B150pro – the largest Brewtools pro-series system, is a brewing system without compromise. Built for enthusiasts, nano breweries and brewpubs. 170-liter (44 gal) tank volume and 35kg (77 lb) malt capacity 6.6kW heating power (2x3.3kW) utilizing two mains inputs High accuracy with 2 digital sensors Conical bottom with center draining for fast and easy cleaning Powerful control system with 7" touch-screen, Wifi and Bluetooth 4.2 The B150pro has an 150 liter (40 gal) boil capacity and about 35 kg (77 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full. The malt pipe has latches that folds out when you hoist it to secure it for draining. To lift the malt pipe on this system you require a lifting system. This is being developed with a custom brewing table and will be ready in the near future. Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess. After brewing with the B150pro, cleaning is fast and easy. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals. The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0,5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right. All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone. The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi. Note that with the added capacity of this system, heating to strike temperature and boiling will take more time compared to our other Pro systems. Specifications: Dimensions excl. packaging: 31.1" H x 28.3" W x 28.3" D Dimensions with one side valve: 31.1" H x 32.2 W x 28.3" D Dimensions with two valves: 31.1" H x 36.2 W x 28.3" D Packaging dimensions: 38.1" H x 28.3" W x 28.3" D Weight excl. packaging: 83 lbs Weight incl. packaging: 99 lbs Tank dimensions: Ø23.6", height 23.6" Tank volume: 44.6 gal (rec maximum boil volume – 39.6 gal) Malt pipe dimensions: Ø19.6", height 21.6" Malt pipe volume: 28.5 gal Max recommended grain quantity: 77 lbs Minimum liquid volume: 9.2 gal Build material: 1.0/1.2 mm stainless steel (SS304) Heating elements: 230V, 6600W (2x3300W) (two individual circuits) Pump: 24VDC brushless, max 6.6 gal/min, max head 14.7 ft, stainless steel head, stepless speed control from touch display Controller: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food grade What's included: Complete brewing system with controller, pump, tank sensor, heaters and lid Malt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube 2 Nema 6-20 power cables, 2 meter 5 year manufacturer's warranty Please note that some parts of Brewtools systems are made by hand, and might have some minor cosmetic imperfections. This will not affect the functionality of the product. For User Manuals and support, please follow this link to Brewtools Docs.

Read more less

The B40pro is a brewing system without compromise. Built for enthusiasts. 46-liter (12 gal) tank volume and 9kg (20 lb) malt capacity 20-40 liter (5-11 gal) pre-boil volume for flexibility 3.2kW heating power (2x1.6kW) utilizing two mains inputs makes heating and boiling fast High accuracy with 2 digital sensors Conical bottom with center draining for fast and easy cleaning Powerful control system with 7" touch-screen, Wifi and Bluetooth 4.2 The B40pro has an 40 liter (10 gal) boil capacity and about 9kg (20 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full. The malt pipe has latches that folds out when you lift it, so you can use both your hands for lifting. Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess. After brewing with the B40pro, you never have to turn it upside down for cleaning. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals. The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0,5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right. With powerful heating elements combining over 3,2kW (two individual 110V circuits) of power, heating the water or wort is very fast. During the boil, the PID system is deactivated and you can adjust the power output to achieve the perfect rolling boil. You can also adjust the maximum current of each mains input, to 10, 13, 15 and 16 Amps, to make sure you never blow a fuse. All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone. The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi. Specifications: Dimensions excl. packaging: 22.8" H x 20.5" W x 20.5" D Dimensions with one side valve: 22.8" H x 24.4 W x 20.5" D Dimensions with two valves: 22.8" H x 28.3 W x 20.5" D Packaging dimensions: 27.5" H x 21.6" W x 21.6" D Weight excl. packaging: 44 lbs Weight incl. packaging: 54 lbs Tank dimensions: Ø15.75", height 14.1" Tank volume: 12.1 gal (rec maximum boil volume – 10.5 gal) Malt pipe dimensions: Ø12.5", height 12.5" Malt pipe volume: 6.78 gal Max recommended grain quantity: 19.8 lbs Minimum liquid volume: 4 gal Build material: 1.0 mm stainless steel (SS304) Heating elements: 110V, 3200W (2x1600W) (two individual circuits) Pump: 24VDC brushless, max 6.6 gal/min, max head 14.7 ft, stainless steel head, stepless speed control from touch display Controller: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food grade What's included: Complete brewing system with controller, pump, tank sensor, heaters and lid Malt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube 2 Nema 5-15 power cables, 2 meter 5 year manufacturer's warranty Please note that some parts of Brewtools systems are made by hand, and might have some minor cosmetic imperfections. This will not affect the functionality of the product. For User Manuals and support, please follow this link to Brewtools Docs.

Read more less

The B40pro is a brewing system without compromise. Built for enthusiasts. 46-liter (12 gal) tank volume and 9kg (20 lb) malt capacity 20-40 liter (5-11 gal) pre-boil volume for flexibility 3.2kW heating power makes heating and boiling fast High accuracy with 2 digital sensors Conical bottom with center draining for fast and easy cleaning Powerful control system with 7" touch-screen, Wifi and Bluetooth 4.2 The B40pro has an 40 liter (10 gal) boil capacity and about 9kg (20 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full. The malt pipe has latches that folds out when you lift it, so you can use both your hands for lifting. Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess. After brewing with the B40pro, you never have to turn it upside down for cleaning. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals. The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0,5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right. With powerful heating elements combining over 3,2kW (230V) of power, heating the water or wort is very fast. During the boil, the PID system is deactivated and you can adjust the power output to achieve the perfect rolling boil. You can also adjust the maximum current of each mains input, to 10, 13, 15 and 16 Amps, to make sure you never blow a fuse. All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone. The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi. Specifications: Dimensions excl. packaging: 22.8" H x 20.5" W x 20.5" D Dimensions with one side valve: 22.8" H x 24.4 W x 20.5" D Dimensions with two valves: 22.8" H x 28.3 W x 20.5" D Packaging dimensions: 27.5" H x 21.6" W x 21.6" D Weight excl. packaging: 44 lbs Weight incl. packaging: 54 lbs Tank dimensions: Ø15.75", height 14.1" Tank volume: 12.1 gal (rec maximum boil volume – 10.5 gal) Malt pipe dimensions: Ø12.5", height 12.5" Malt pipe volume: 6.78 gal Max recommended grain quantity: 19.8 lbs Minimum liquid volume: 4 gal Build material: 1.0 mm stainless steel (SS304) Heating elements: 230V, 3200W (2x1600W) Pump: 24VDC brushless, max 6.6 gal/min, max head 14.7 ft, stainless steel head, stepless speed control from touch display Controller: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food grade What's included: Complete brewing system with controller, pump, tank sensor, heaters and lid Malt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube 1 pcs Nema 6-20 power cable, 2 meter 5 year manufacturer's warranty Please note that some parts of Brewtools systems are made by hand, and might have some minor cosmetic imperfections. This will not affect the functionality of the product. For User Manuals and support, please follow this link to Brewtools Docs.

Read more less

The B80pro is a brewing system without compromise. Built for enthusiasts. 90-liter (23 gal) tank volume and 20kg (44 lb) malt capacity 30-80 liter (8-21 gal) pre-boil volume for flexibility 6kW heating power (2x3kW) utilizing two mains inputs makes heating and boiling fast High accuracy with 2 digital sensors Conical bottom with center draining for fast and easy cleaning Powerful control system with 7" touch-screen, Wifi and Bluetooth 4.2 The B80pro has an 80 liter (21 gal) boil capacity and about 20kg (44 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full. The malt pipe has latches that folds out when you lift it, so you can use both your hands for lifting. Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess. After brewing with the B80pro, you never have to turn it upside down for cleaning. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals. The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0,5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right. With powerful heating elements combining over 6kW (230V) of power, heating the water or wort is very fast. During the boil, the PID system is deactivated and you can adjust the power output to achieve the perfect rolling boil. You can also adjust the maximum current of each mains input, to 10, 13, 15 and 16 Amps, to make sure you never blow a fuse. All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone. The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi. Specifications: Dimensions excl. packaging: 26.5" H x 24.4" W x 24.4" D Dimensions with one side valve: 26.5" H x 28.3 W x 24.4" D Dimensions with two valves: 26.5" H x 32.3 W x 24.4" D Packaging dimensions: 32.6" H x 24.4" W x 24.4" D Weight excl. packaging: 60 lbs Weight incl. packaging: 75 lbs Tank dimensions: Ø19.6", height 18.1" Tank volume: 23.7 gal (rec maximum boil volume – 21.1 gal) Malt pipe dimensions: Ø16.5", height 16.5" Malt pipe volume: 15.3 gal Max recommended grain quantity: 44 lbs Minimum liquid volume: 6.6 gal Build material: 1.0 mm stainless steel (SS304) Heating elements: 230V, 6000W (2x3000W) Pump: 24VDC brushless, max 6.6 gal/min, max head 14.7 ft, stainless steel head, stepless speed control from touch display Controller: ARM Cortex M4 180mhz, 7" Touch display Connectivity: WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD Hoses: 16x25mm silicone, food grade What's included: Complete brewing system with controller, pump, tank sensor, heaters and lid Malt pipe with handle and latches 1 pcs expanded metal filter 1 pcs 3-way valve Temperature sensor with adapter for pump line 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup) 3 pcs 34mm TC blind caps 1 pcs dip tube, short type 1 pcs mash hat for spreading the wort 1 pcs sparge tube 150cm 16x25mm silicone tube 1 pcs 34mm TC to 19mm hose barb adapter O-rings for the center pipe and dip tube 2 Nema 6-20 power cables, 2 meter 5 year manufacturer's warranty Please note that some parts of Brewtools systems are made by hand, and might have some minor cosmetic imperfections. This will not affect the functionality of the product. For User Manuals and support, please follow this link to Brewtools Docs.

Read more less

1" Ball Clamp Connecting Rod. 60mm. Connects 2 ball joints.

Read more less

1" Ball Clamp Quick Clamp for Pipes. Pipe dimension Ø 18-35mm. Compatible with pipes with outer diameter 0.70" to 1.37".

Read more less

Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 44.8" Packaging size: 42.5" (h) x 23.6" (w) x 23.6 (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 19.6" Ø Gross volume: 40.6 gallons Max rec. volume: 36.9 gallons Min rec. volume: 11.8 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 55.5" Packaging size: 52.3" (h) x 28.3" (w) x 28.3" (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 23.6" Ø Gross volume: 79.2 gallons Max rec. volume: 72.6 gallons Min rec. volume: 18.4 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com Please Note: Example photo of Brite 150 model shown.

Read more less

Brite Light offers the same tank body as the standard Brewtools Brite Tank with a slight difference in included accessories for a more affordable price Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brite Light is the same tank body as the standard Brewtools Brite Tank, but with a different pressure relief valve and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Brite Light can be upgraded to a standard brite tank where you prefer. Key Differences: CleanCore butterfly valve made from Polyketone Barbed blow-off PRV Can be set to open for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Does not include neoprene insulation jacket Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 28.3" (72 cm) Packaging size: 25.1" (h) x 19.6" (w) x 19.6" (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 12.1 gallons Max rec. volume: 10.5 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The Light version of the tank does not include the insulation jacket, and has the Brewtools CleanCore butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

Brite Light offers the same tank body as the standard Brewtools Brite Tank with a slight difference in included accessories for a more affordable price Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brite Light is the same tank body as the standard Brewtools Brite Tank, but with a different pressure relief valve and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Brite Light can be upgraded to a standard brite tank where you prefer. Key Differences: CleanCore butterfly valve made from Polyketone Barbed blow-off PRV Can be set to open for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Does not include neoprene insulation jacket Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 39.3" Packaging size: 36.2" (h) x 19.6" (w) x 19.6 (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 21.3 gallons Max rec. volume: 19.8 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The Light version of the tank does not include the insulation jacket, and has the Brewtools CleanCore butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 39.3" Packaging size: 36.2" (h) x 19.6" (w) x 19.6 (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 21.3 gallons Max rec. volume: 19.8 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

Kit contains what you need to carbonate in Brewtools Unitanks using CO2 and a ball lock connector. Contents: Ball Lock Adapter, Gas, TC34mm Carb. stone 4.7" (120 mm), 0.5 micron Gaskets M16 O2/CO2 stone holder for ball lock

Read more less

3" CIP adapter with 1/2" MPT threads for CIP spray ball with or without extension pipe. This is the correct size for the Brewtools F40 and F80 Unitanks. Fluid input is TC 34mm. Remember 34mm Tri-Clamp and gasket are needed, and also the fitting of choice for connecting fluid input.

Read more less

4" CIP adapter with 1/2" MPT threads for CIP spray ball with or without extension pipe. Used for CIP via the 4" port on Brewtools Steam Hats or the F150 Unitank.  Fluid input is TC 34mm. Remember 34mm Tri-Clamp and gasket are needed, and also the fitting of choice for connecting fluid input.

Read more less

CIP-ball for easy cleaning. Fits all Brewtools CIP adapters and center pipes with 1/2" NPT threads. Does not include the adapter shown in the example photo.

Read more less

Circulation manifold for mashing and sparging. Fastened around the sparge pipe and can be adjusted to sit at the top of the grain bed. Included: Manifold Sparge adapter with 1/2" (12 mm) hose barb Silicone core Silicone tube 3/8" x 5/8", 3.2' (10mm x 16 mm, 1 meter) Tri Clamp, 34mm

Read more less