Products

The insulation jacket reduces heat loss during brewing. Recommended for use outdoor or in colder environments. For B150pro brewing system.

Read more less

The insulation jacket reduces heat loss during brewing. Recommended for use outdoor or in colder environments. For B40pro brewing system.

Read more less

The insulation jacket reduces heat loss during brewing. Recommended for use outdoor or in colder environments. For B80pro brewing system.

Read more less

Insulation Jacket for MiniUni™ standard model fermenter. Reduces condensation on the tank during big differences in temperature. Made from 5mm neoprene.

Read more less

Insulation Jacket for MiniUni™ "plus" model fermenter. Reduces condensation on the tank during big differences in temperature Made from 5mm neoprene.

Read more less

Panel mounted fitting from TC34mm to 12mm barb with M28 threads and nut. Used with MiniChilly 17 for glycol loops.

Read more less

The sample valve coil (Pigtail) reduces foam when drawing samples from a pressurized tank.

Read more less

The Brewtools LP20-3-Pin Power Cable is available for pre-order. Place your order now and we will automatically ship it to you when it becomes available. The current estimated availability is early 2026.   Power cable for use between FCS relay module (5A) and sanitary heaters or water heater.   Connector A: LP20, 3-pin male plug Connector B: LP20, 3-pin female plug Color: Black Length: 2m (6.5 ft.)

Read more less

Power supply with DIN 43650-connector for solenoid valves. Made for use with solenoid valves directly from an AC outlet in an Inkbird or equivalent systems. Adapters for global use included. Specifications: Input: 100-240V AC, 50/60 hz Output: 24V DC, 1.66A (39.84W) Cord Length: 3m (9.8')  

Read more less

The Brewtools Power Supply for Gas Release Solenoid Valve is available for pre-order. Place your order now and we will automatically ship it to you when it becomes available. The current estimated availability is early 2026.   24V, 40W Power supply with LP12 2-pin plug.

Read more less

The push-fit sample valve coil reduces foam when drawings samples from a pressurized tank. Made for use with the sample valve included with the Brewtools Unitank Light.  You will also need the JG Push-fit Adapter to connect to the sample valve. Outside diameter: 4mm Designed for 4mm pushfit.

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

Digital tank sensor (DS18B20) with gasket. Recommended hole size: 22mm

Read more less

High quality transparent silicone tube. Recommended for Brewtools Brewing Systems. Use with 19mm barb x 34mm tri-clamp (BT1092). Food grade silicone Inside diameter: 16mm (0.62") Outside diameter: 25mm (0.98") Sold in 1.5m lengths (4.9')

Read more less

High quality transparent silicone tube. Recommended for dumping yeast. Use with 30mm barb x 2" tri-clamp (BT1074). Food grade silicone Inside diameter: 25mm (0.98") Outside diameter: 34mm (1.3") Sold in 1.5m lengths (4.9')

Read more less

DIN 43650 Type A connector for solenoid valves. PG9 gland for cable Ø6-8mm IP65

Read more less

Solenoid valve made from stainless steel. Designed for glycol, water and air/co2. TC3mm ports in both ends for maximum flexibility. Coil and plunger Italian-made by ACL. The valve can easily ble disassembled and cleaned. Coil has DIN 43650 Type A connector (not included). Specifications: Ports: TC 1.5" / TC 1.5" Operation: NC (normally closed) Power supply: DC24V, 10W Orifice: Ø4.5mm Pressure rating: Max 3 bar / 43 PSI

Read more less

Solenoid valve made from stainless steel. Designed for glycol, water and air/co2. T.C. 34mm ports in both ends for maximum flexibility. Coil and plunger Italian-made by ACL. The valve can easily ble disassembled and cleaned. Coil has DIN 43650 Type A connector (not included). Normally used with T.C. 34mm to 3/8" NPT threaded adapter and leak-free quick connectors on one or both sides depending on setup. Specifications: Ports: TC34mm / TC34mm Operation: NC (normally closed) Power supply: DC24V, 10W Orifice: Ø4.5mm Pressure rating: Max 3 bar / 43 PSI

Read more less

The Brewtools Gas Release Solenoid Valve is available for pre-order. Place your order now and we will automatically ship it to you when it becomes available. The current estimated availability is early 2026.   Solenoid valve made from stainless steel. Designed for air/co2. TC3mm ports in both ends for maximum flexibility. Coil and plunger Italian-made by ACL. The valve can easily be disassembled and cleaned. Coil has DIN 43650 Type B connector (not included). Specifications: Ports: TC34mm / TC34mm Operation: NC (normally closed) Power supply: DC24V, 6.5W Orifice: Ø2.0mm Pressure rating: Max 3 bar / 43 PSI

Read more less

Spunding valve for manual pressure setting. Adjustable from 0-2.2 bar (0-32 PSI) with a maximum deviation of 0.2 bar. We recommend disassembling the valve and lubricating all silicone parts with silicone grease before use. The polycarbonate glass should not be cleaned with PBW or other caustic chemicals.

Read more less