Beer Making

This is a dome lid for Ss Brewtech 7 gal Chronical and Brew Bucket fermenters. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.

Read more less

Gasket replacement for the Ss Brewtech Brew Bucket Mini. Made with brewer's grade silicone.

Read more less

Ss Brewtech Brew Bucket Mini replacement lid. Comes with a gasket and 17mm punched hole for an airlock or tubing. Made from 304 stainless steel.

Read more less

If you bought a 3" TC dome lid for your standard Chronical this covers up that large 3" tri clamp opening. 1/2" tubing or an airlock and #2 stopper fit nicely in the 17mm hole. This cap comes standard with Brewmaster Chronicals and only fits on a 3" tri clamp flange. Comes with a 1/2" hose barb and pressure relief valve. 3" tri clamp gasket and clamp not included.

Read more less

This Ss Brewtech fitting helps with recirculation in your mash tun. It has a 1/2" FPT on the mash tun side, a 1/2" MPT on the opposite side, and a 1/2" hose barb on the bottom of the tee. Made with 304 stainless steel.

Read more less

Used along with the Ss recirculation bulkhead, this fitting adds a 3/8" hose barb on your mash tun. It attaches with a 1/2" FPT knurled locking nut and is required if you are using the Ss recirculation manifold. Made from 304 stainless steel and silicone O-rings included.

Read more less

The Vorlauf Arm Assembly is great for recirculating your mash. It fits right into the Ss Brewtech recirculation bulkhead fitting with a 1/2" knurled FPT locking nut. Made from 304 stainless steel.

Read more less

These caster wheels are designed to move empty half bbl and under vessels. 1BBL vessels should use HD | Casters. Older 7 gal Legacy Chronicals do not have threaded feet and use the Caster Boots instead.  Kit includes 3 or 4 casters with leveling washers Compatible with Chronicals series, Unitanks, and Brite Tanks 3/8" x 1.5" stem Includes brake High-quality PP wheels Double bearing wheels Click here for Quick Ref *Not intended to be moved when full, damage can occur. *Not for Nano Jacketed Tanks.

Read more less

Works with older threaded coil kits like FTSs | Brew Bucket and FTSs | Chronical. Not compatible with TC lid coils like the Chilling Coil Kit or Chronical 2.0. Extends the lid-mounted FTSs coil into the fermenter which allows for partial batch brews. 304 Stainless Steel Long Extensions: 24 cm total length Partial Batch Sizes: 14 gal Chronical = 5 gal batch Half bbl Chronical = 7 gal batch  

Read more less

Works with older threaded coil kits like FTSs | Brew Bucket and FTSs | Chronical. Not compatible with TC lid coils like the Chilling Coil Kit or Chronical 2.0. Extends the lid-mounted FTSs coil into the fermenter which allows for partial batch brews. 304 Stainless Steel Long Extensions: 24 cm total length Partial Batch Sizes: 14 gal Chronical = 5 gal batch Half bbl Chronical = 7 gal batch  

Read more less

These chiller coil extensions extend the length of the Ss Brewtech FTSs chiller coil for Brew Bucket and 7 gallon Chronical fermenters. Very useful if you brew partial batches and/or there is a cool ambient temperature forcing you to mostly heat your fermenter. Mounts under the lid to drop the coils further down. Made from 304 stainless steel and leak tested.

Read more less

The MTSs is designed for use with Ss Brewtech’s Infusion Mash Tun.  During extended Mash periods or in relatively cold ambient temperatures, the mash will naturally drop in temperature.   With the MTSs you will be able to provide better controlled temperatures during the mash saccharification process.  Holding a consistent saccharification temperature will insure you are making the beer and flavor profiles you planned to produce. The MTSs is a low wattage silicone heater pad, which is bonded to the underside of the 5 degree sloped bottom on your Mash Tun using a strong adhesive backing on the heater pad.  The heater is controlled with a 12 volt digital temp controller.  You simply set your target temperature and the heater will cycle on and off to maintain your set point.  This system is NOT designed for heating water to strike temp and/or step mashing, though it can help with fine tuning your strike water temp those last few degrees and/or maintaining your strike water temp while you are preparing your grist or balancing your water chemistry.

Read more less

Another high quality intuitive piece of brewing gear from Ss BrewTech, the Ssparge Arm!  Simple design, with adjustable height and flow rate, this is a necessary add on for the Ss InfuSsion Mash Tuns.  Incredibly easy to use: Simply choose and thread on a flow rate disk, clip the unit to your mash tun, set the height just above your grain bed, and get brewing!!  See the Documents tab above for a more detailed guide to use. For USE ONLY ON Ss MASH TUNS (10/20 gal) 304 Stainless Steel construction Designed for gravity feed from HLT Or hook your own pump / flow control valve 3/8” diameter stainless tubing 3/8" barb on inlet of tubing Custom silicone handle mount for Ss Mash Tun Easily adjust height of sparge head up  / down Uniform liquid dispersion fom sparge head

Read more less

Add the perfect amount of restriction to any beer line to reduce foam. Eliminates the need for flow control in the faucet itself. Great for use in Jockey Boxes or anywhere you are serving beverages with varying levels of carbonation.    If you are currently using a long length of tubing to increase restriction you can now shorten your tubing. A shorter line holds less beer. Beer that is stored in the line tends to warm up quicker, adding to foaming issues, and is more likely to stale from bacteria present in the line.    Features: Adjust flow with an included Allen wrench (keeps unauthorized people from adjusting the unit) Eliminate foam from beer or slow down / speed up other beverages Fix systems with issues without having to replace lines or faucets Take the guesswork out of line restriction.  You can use shorter lines and still have perfect restriction.  You can also use larger ID lines and adjust as necessary. Easy to disassemble for cleaning, clear body for easy monitoring Made in Germany by CM Becker from Food grade plastic and stainless steel parts! Comes Equipped with 2 x 3/16" Barbs Easy to install to any existing beer line (cut line and install two clamps)

Read more less

Counter pressure bottle filler for carbonated beverages Flow stops automatically at the perfect height in the bottle neck every time, regardless of bottle variations Accommodate bottles up to 13.5" tall and up to 4" in diameter Made to order in the United States The Carbonated Beverage Filler is a counter-pressure machine that fills bottles with pre-carbonated beverages without losing carbonation; The XpressFill Carbonated Beverage Filler uses a high-tech sensor probe that shuts off the fill at the perfect height in the bottle neck every time, regardless of bottle variations. Even though this machine is designed for carbonated beverages, it can also be used for still products as long as they are fed to the filler using a lightly pressurized keg or pump. That means that you can use this for your normal bottling as well as for those special bottle-conditioned beers too! The Carbonated Beverage Filler is also suitable for filling Charmat-style sparkling wines, at a maximum operating pressure of 60 psi. The filler will accommodate bottles up to 4 inches in diameter and up to 13.5 inches tall. This covers most standard sized 12 oz, 22 oz and 750 mL bottles. Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 200 Bottles per Hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Maximum Bottle Dimensions: 4" D x 13.5" H Maximum Operating Pressure: 60 psi Weight: 32 lbs Dimensions: 16 inches wide x 17 inches high x 15.5 inches deep Requires 1.5A of 115V 50/60Hz power  

Read more less

Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits Includes Magnum and Chinook hops Estimated ABV: 7.1% Estimated IBUs: 68-72 Makes 5 gallons of finished beer Big, bold, and full of flavor.  This rendition of one of the most egotistical beers in America is not for the light-beer lover.  In fact, if you prefer a beer that looks and tastes more like water, we recommend you leave this page immediately.  Your feelings might get hurt just reading about it... Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits.  The clean bitterness from Magnum hops allows the rich flavors of Aromatic, Special B, and Caramel Munich malts to control your taste buds.  The aromatics of Chinook hops blend perfectly with these malts, creating an intense combination of confusion and satisfaction at the same time.  After your first sip, if you're thinking "Whoa. That was interesting, intense, & delicious!" you know you brewed it right! Makes 5 gallons Estimated Original Gravity: 1.066-70 SRM (Color Range): 16-18 IBUs: 68-72 Estimated Alcohol Percentage: 7.1%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.    

Read more less

An amazing Centennial hop bomb of an IPA modeled after Bell's Brewery Two Hearted® American IPA Includes 100% Centennial hops from boil to dry hop Estimated ABV: 5.8% Estimated IBUs: 45-48 Makes 5 gallons of finished beer An amazing IPA derived from one of our favorites, Bell's Two Hearted, the I Heart IPA is a true Centennial hop bomb!  Using Centennial as the bittering, aroma, and dry hop additions gives you a true understanding of how incredible and universal this hop can be.   Light in color and body, the malt character hides a little, allowing the burst of Centennial flavor and aroma shine.  Our Bell's Two Hearted clone recipe has a slightly lower original gravity than the original.  Coming in at right around 6% ABV, this isn't one of those IPAs that will make you shy away from a second!   Makes 5 gallons Estimated Original Gravity: 1.058-1.062 SRM (Color Range): 5-7 Estimated IBUs: 45-48 Estimated Alcohol Percentage: 5.8%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.      

Read more less

Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits Includes Magnum and Chinook hops Estimated ABV: 7.1% Estimated IBUs: 68-72 Makes 5 gallons of finished beer Big, bold, and full of flavor.  The Pompous Ass Ale is a rendition of one of the most egotistical beers in America, and is not for the light-beer lover.  In fact, if you prefer a beer that looks and tastes more like water, we recommend you leave this page immediately.  Your feelings might get hurt just reading about it... Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits.  The clean bitterness from Magnum hops allows the rich flavors of Aromatic, Special B, and Caramel Munich malts to control your taste buds.  The aromatics of Chinook hops blend perfectly with these malts, creating an intense combination of confusion and satisfaction at the same time.  After your first sip, if you're thinking "Whoa.  That was interesting, intense, & delicious!" you know you brewed it right! Makes 5 gallons Estimated Original Gravity: 1.066-70 SRM (Color Range): 16-18 IBUs: 68-72 Estimated Alcohol Percentage: 7.1%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

An amazing Centennial hop bomb of an IPA modeled after Bell's Brewery Two Hearted® American IPA Includes 100% Centennial hops from boil to dry hop Estimated ABV: 5.8% Estimated IBUs: 45-48 Makes 5 gallons of finished beer An amazing IPA derived from one of our favorites, the I Heart IPA is a true Centennial hop bomb!  Using Centennial as the bittering, aroma, and dry hop additions gives you a true understanding of how incredible and universal this hop can be.   Light in color and body, the malt character hides a little, allowing the burst of Centennial flavor and aroma shine.  Our Bell's Two Hearted clone recipe has a slightly lower original gravity than the original.  Coming in at right around 6% ABV, this isn't one of those IPAs that will make you shy away from a second!   Makes 5 gallons Estimated Original Gravity: 1.058-1.062 SRM (Color Range): 5-7 Estimated IBUs: 45-48 Estimated Alcohol Percentage: 5.8% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

Dry Hop is a blend of A20 Citrus and A04 Barbarian. When this blend goes to work on your hoppy beer, the hop aroma blows up. The combination of these strains produces amazing aromas of citrus, peach, and apricot that will accentuate your IPA, pale ale, and any other hop-driven beer. This blend contains a strain that tests positive for the STA1 gene via PCR analysis and is therefore considered to be Saccharomyces cerevisiae var. Diastaticus. This yeast strain is not a genetically modified organism (GMO). Attenuation: 73-75% Flocculation: Low Alcohol Tolerance: 10% ABV Optimum Fermentation Temp: 67-80°F Cell Count: 200 Billion Similar Strains: WLP644 Please Note: For best results we Always recommend ordering an Ice Pack with your liquid yeast. Ice Packs can be found below in the "You might Also Need" section. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

10-gallon propane systems are regularly stocked and ready to ship! Single tier brew system. Look into and interact with every kettle without the need for a step stool or ladder Digital Touchscreen Controller comes standard. Control every aspect of your brew day from a single screen Automatic HERMS mashing. Set up to five mash steps in the digital controller and temperatures will be raised and be maintained automatically Powerful Gas Burners. Whether you choose Propane or Natural Gas as your fuel source, your burners will be fast, efficient, quiet and have great flame control The Ultimate Sparge Arm. Eliminate hot side aeration with this fully adjustable sparge arm Built to order in the USA. Every system features a custom-welded stainless steel frame manufactured in the BrewBuilt metal shop Brew like a pro with the BrewBuilt Low Rider BrewSculpture. Our brewing systems were first introduced in the 1990’s and now have over two decades worth of R&D and customer feedback built into their design. There’s a reason why top level breweries like Sierra Nevada and Russian River use a BrewBuilt BrewSculpture for training, ingredient testing and pilot batches. Touchscreen Control Panel From heating strike water to whirlpooling hop additions, you’ll orchestrate your entire brew day from our custom designed 7” touchscreen control panel. The HLT burner and pumps can be controlled from a single touchscreen controller. Program your mash steps and the controller will do the rest—igniting burners and kicking on pumps to recirculate wort as needed. It also offers boil addition timers to remind you when to add hops or clarifiers, as well as manual control of your pumps. Control Panel Key Features: Programmable HERMS Mash Steps - choose from 3 preset mash schedules or custom design your own with up to 5 steps. From there the control panel guides your mash through the temp raises and time rests automatically. Always Hot - Controller maintains the Hot-Liquor tank temperature you choose by turning the burner off and on automatically. Auto Sparging -  Sparge water flow is controlled automatically with integrated Mash Tun float switch. Timer Alarms - Built in boil timers remind you when to add hops, finings, or anything else. Manual Mode -  allows you to control pumps for anything you want such as cleaning. Automatic HERMS Mashing Mash temps are maintained via the HERMS coil made from convoluted copper tubing. This top-of-the-line coil design offers unparalleled efficiency while gently heating your wort. Choose from your saved mash schedules or program one on the fly. When the mash begins, the controller will automatically maintain the temperature of the hot liquor bath that the HERMS coil rests in. When the wort temp drops below your set point, the controller will turn on the pump to circulate wort through the coil. You can also set the pump to continuously circulate wort for the whole mash if you prefer, and the HLT will continue to maintain your mash temp automatically. When each mash step is complete, the controller will turn on the burner to raise the temperature of the HLT and begin the next step.  Powerful Gas Burners Choose your fuel source! Natural Gas is a nice option for the brewer whose home is already supplied with natural gas. This is a convenient option since you will never have to refill propane tanks, and you will never run out of gas mid batch. However, you do lose the freedom to move your BrewSculpture™ once it has been hard plumbed to your gas line. Whether you prefer the mobility of using propane or the reliable supply of natural gas, your burners will be fast, efficient, quiet and have great flame control. The Ultimate Sparge Arm No other system protects against hot side aeration quite like the BrewSculpture. While other systems simply pump wort back to the top of the mash tun and let it splash back down over the grain bed, the Ultimate Sparge Arm will make sure your wort circulates with virtually zero aeration. The Ultimate Sparge Arm features adjustable height and adjustable flow. Depending on what beer you’re brewing, the surface of the mash will be at different heights. Simply lower the sparge arm to just below the surface of the mash and your recirculation will be splash-free. The ball valve at the inlet of the sparge arm allows you to dial in the flow and reduce turbulence as you see fit. Custom Welded Frame Made in the USA Every BrewBuilt BrewSculpture is made to order and built around a custom TIG welded 304 stainless steel stand. While other companies cut corners by using generic stainless steel tables for their systems, our extra beefy stand is fabricated in our California-based metal shop and designed to outlive even you. Every stand comes with rolling casters and folding handlebar so you can easily move your system whenever needed. What Sets the Digital BrewSculpture Apart? Only system with a heavy-duty, purpose-built, welded stainless frame as standard. Only system with digital touch screen as standard. Only system with programmable mash steps on touch screen.  Welded fittings for a lifetime of easy-to-clean, leak-free performance. Ultimate Sparge Arm reduces hot side aeration. Keep sparge water warm while preheating the boil. Key Features of the Low Rider BrewSculpture Made in USA by BrewBuilt 304 Stainless Steel TIG welded stands. The ultimate frame material that will outlast you. No paint or powder coating. Every BrewSculpture includes folding handles and built-in rear casters that allow you to move your BrewSculpture with ease. Oversized 304 stainless BrewBuilt Kettles with welded fittings, notched lids, internally etched volume markers, aluminum clad bottoms, and silicone handles. Built to last. Our "Large" option will come with 22 gallon kettles, the "XL" model will come with 30 gallon kettles, and the "XXL" model will come with 50 gallon kettles.  The fluid path is easy to use and clean. We've included the time tested, top of the line March pumps along with heat resistant food-grade silicone tubing and our own specially designed stainless quick disconnects. Burners are fast, efficient, quiet and have great flame control. Mashtun includes the Ultimate Sparge Arm with innovative design to eliminate hot-side aeration. The center draw outlet with quick disconnect is locked in during mashing but easily disconnects for cleaning. The mash screen has a very low volume of base water under the screen to aid with efficiency and mash consistency. The perforated stainless mash screen is reinforced for use with pump recirculation and includes a silicone gasket to make a perfect seal with the kettle wall. Internally etched volume markers make mash water additions super easy. Boil Kettle includes innovative Whirlpool maker for leaving hops and trub behind. Volume markers are etched on the inside so you know exactly how much wort you have at all times. The lid notch is super handy for hanging hop bags, using an immersion chiller, etc., but when not is use an included silicone plug seals the notch. The bottom of the boil kettle is tri-clad with a 4mm aluminum core sandwiched between two layers of 304 stainless. The aluminum core eliminates scorching and the cleaning that comes with a scorched kettle. Includes all of the tubing you'll need with: 4 x 40 in. Hoses with male and female quick disconnects 32 in. Hose with 2 female quick disconnects 32 in. Hose with 1 female quick disconnect and 1 open end Dimensions / Specifications: Stainless Frame measures 73" L x 19.5" W x 29" H Requires 110/120V power source   Please Note:  Natural Gas Sculptures require installation by a professional plumber.  These units terminate in a ¾” Male Flare connection. We Supply front and back handles on the XXL Kettles to allow removing the kettles from the stand more easily.

Read more less

Multi tier brew system. Requires less space and features an innovative tipping mash tun for easy cleaning. Digital Touchscreen Controller comes standard. Control every aspect of your brew day from a single screen Automatic HERMS mashing. Set up to five mash steps in the digital controller and temperatures will be raise and be maintained automatically Powerful Gas Burners. Whether you choose Propane or Natural Gas as your fuel source, your burners will be fast, efficient, quiet and have great flame control. The Ultimate Sparge Arm. Eliminate hot side aeration with this fully adjustable sparge arm. Built to order in the USA. Every system features a custom-welded stainless steel frame manufactured in the BrewBuilt metal shop. Famous for its innovative tipping mash tun, the Tippy Dump BrewSculpture allows you to easily dump spent grain after mashing. Place a garbage can on the built-in step, tip the mashtun and you're done—no heavy lifting or scooping necessary! A Tippy Disc is welded directly to the kettle, allowing the mash tun to be locked in place when vertical and then to be rotated and locked in at different angles as you empty and clean the mash tun. The Tippy Dump system includes a built in flip-down stainless step giving you easy access to see into the mash tun. Inspired by professional brewpub brewhouses, which are designed to fit in tight spaces, the mash tun is placed directly over the hot liquor tank. This not only saves space but also allows for heat coming off the hot-liquor tank to help keep the mashtun warm during the mash. Touchscreen Control Panel From heating strike water to whirlpooling hop additions, you’ll orchestrate your entire brew day from our custom designed 7” touchscreen control panel. Unlike other systems, all of the heating elements and pumps can be controlled from a single touchscreen controller. Program your mash steps and the controller will do the rest—cycling heating elements and kicking on pumps to recirculate wort as needed. It also offers programmable delayed start so you can heat your strike water in advance, boil addition timers to remind you when to add hops or clarifiers, as well as manual control of your pumps and linear power control of the electric elements. Control Panel Key Features: Programmable HERMS Mash Steps - choose from 3 preset mash schedules or custom design your own with up to 5 steps. From there the control panel guides your mash through the temp raises and time rests automatically. Always Hot - Controller maintains the Hot-Liquor tank temperature you choose by turning the burner off and on automatically. Auto Sparging - Sparge water flow is controlled automatically with an integrated Mash Tun float switch Timer Alarms - Built in boil timers remind you when to add hops, finings, or anything else Manual Mode - allows you to control pumps manually for anything you want such as cleaning. Automatic HERMS Mashing Mash temps are maintained via the HERMS coil made from convoluted copper tubing. This top-of-the-line coil design offers unparalleled efficiency while gently heating your wort. Choose from your saved mash schedules or program one on the fly. When the mash begins, the controller will automatically maintain the temperature of the hot liquor bath that the HERMS coil rests in. When the wort temp drops below your set point, the controller will turn on the pump to circulate wort through the coil. You can also set the pump to continuously circulate wort for the whole mash if you prefer, and the HLT will continue to maintain your mash temp automatically. When each mash step is complete, the controller will raise the temperature of the HLT and begin the next step. The HERMS coil can also double as your wort chiller when the boil is over and quickly cools wort thanks to the twisted pattern of the copper tubing. Powerful Gas Burners Choose your fuel source! Natural Gas is a nice option for the brewer whose home is already supplied with natural gas. This is a convenient option since you will never have to refill propane tanks, and you will never run out of gas mid batch. However, you do lose the freedom to move your BrewSculpture™ once it has been hard plumbed to your gas line. Whether you prefer the mobility of using propane or the reliable supply of natural gas, your burners will be fast, efficient, quiet and have great flame control. The Ultimate Sparge Arm No other system protects against hot side aeration quite like the BrewSculpture. While other systems simply pump wort back to the top of the mash tun and let it splash back down over the grain bed, the Ultimate Sparge Arm will make sure your wort circulates with virtually zero aeration. The Ultimate Sparge Arm features adjustable height and adjustable flow. Depending on what beer you’re brewing, the surface of the mash will be at different heights. Simply lower the sparge arm to just below the surface of the mash and your recirculation will be splash-free. The ball valve at the inlet of the sparge arm allows you to dial in the flow and reduce turbulence as you see fit. Custom Welded Frame Made in the USA Every BrewBuilt BrewSculpture is made to order and built around a custom TIG welded 304 stainless steel stand. While other companies cut corners by using generic stainless steel tables for their systems, our extra beefy stand is fabricated in our California-based metal shop and designed to outlive even you. Every stand comes with rolling casters and folding handlebar so you can easily move your system with ease whenever needed. What Sets the Digital BrewSculpture Apart? Only system with a heavy-duty, purpose-built, welded stainless frame as standard. Only system with rotating mash tun to easily dump spent grains Only system with digital touch screen as standard. Only system with programmable mash steps on touch screen.  Only system using top-of-the-line convoluted coil (HERMS) for the quickest temp increases while still being gentle. Only system with an oversized Hot Liquor Tank to speed up brew day. Welded fittings for a lifetime of easy-to-clean, leak-free performance. Ultimate Sparge Arm reduces hot side aeration. Keep sparge water warm while preheating the boil. Key Features of Tippy-Dump BrewSculptures Made in USA by BrewBuilt 304 Stainless Steel TIG welded stands. The ultimate frame material that will outlast you. No paint or powder coating. Every BrewSculpture includes folding handles and built-in rear casters that allow you to move your BrewSculpture with ease. Oversized 304 stainless BrewBuilt Kettles with welded fittings, notched lids, internally etched volume markers, aluminum clad bottoms, and silicone handles. Built to last. Our "Large" option will come with 22 gallon kettles, while the "XL" model will come with 30 gallon kettles. The fluid path is easy to use and clean. We've included the time tested, top of the line March pumps along with heat resistant food-grade silicone tubing and our own specially designed stainless quick disconnects. Burners are fast, efficient, quiet and have great flame control. Mashtun includes the Ultimate Sparge Arm with innovative design to eliminate hot-side aeration. The center draw outlet with quick disconnect is locked in during mashing but easily disconnects for cleaning. The mash screen has a very low volume of base water under the screen to aid with efficiency and mash consistency. The perforated stainless mash screen is reinforced for use with pump recirculation and includes a silicone gasket to make a perfect seal with the kettle wall. Internally etched volume markers make mash water additions super easy. Boil Kettle includes innovative Whirlpool maker for leaving hops and trub behind. Volume markers are etched on the inside so you know exactly how much wort you have at all times. The lid notch is super handy for hanging hop bags, using an immersion chiller, etc., but when not is use an included silicone plug seals the notch. The bottom of the boil kettle is tri-clad with a 4 mm aluminum core sandwiched between two layers of 304 stainless. The aluminum core eliminates scorching and the cleaning that comes with a scorched kettle. Includes all of the tubing you'll need with: 2 x 40 in. Hoses with male and female quick disconnects 90 in. Hose with male and female quick disconnects 32 in. Hose with 1 female quick disconnect and 1 open end Dimensions / Specifications: Stainless Frame measures 50" L x 22.25" W x 62" H Requires 110/120V power source   Please Note:  Natural Gas Sculptures require installation by a professional plumber. These units terminate in a ¾” Male Flare connection, and have multijet burners as opposed to the banjo style displayed in the pictures above.  

Read more less

Use this splitter to run two propane burners from one propane tank. In most applications two burners is the max you can simultaneously run from one tank before you start to freeze up the vavle on the propane tank. Works well with BrewBuilt™ AfterBurners, Camp Chef burners, and other brewing related burners.      

Read more less

Think Stave Segments, evolved.  The BeerStix Domininos are 1 1/2" square segments of oak, milled to give you quick extraction, and full flavor.  While similar to conventional stave segments, you will see similar results in a much shorter timeframe, making these much more suitable for beer.  This is a 490 g (1 lb) bag of French Oak Domininos, Toasted Medium Plus and sized to oak 100 gallons of Beer.  This is the quickest turnaround on a Beer Stix product.  At one month extraction, you'll see a quick integration of rich oak character due to the high surface area of these domininos in contact with your beer. Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Domininos will provide a round and rich oak character specific to the toast level and origin.  French Oak toasted to a Medium + with the beerstix milling will give your beer toasted roasty aromas reminiscent of coffee, along with some caramel, and a subtle sweetness that gets the whole palate.  Different beer styles will accentuate or mask different flavors from the oak, so expect some variation! Features: Oak Origin - France, Allier Region Toast Level - Medium Plus Oak Form - Domininos, 490 gram Volume Treated - 100 Gal Beer Extraction Time - 1 Month (see note below) Flavors & Aromas - Coffee, Roasted Toasty aromas, Caramel, Slight Sweetness Please Note - Allow 1 month minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.

Read more less