Beer Making

This is the Thermometer half of the FE390. One side has a 3/8" Barb and the other has a 1/2" fnpt. Add a H616 barb or use alone or thread on to a 1/2" npt fitting. It is used to measure the temperature on the outflow side of your counterflow wort chiller. How long should I apply oxygen while transferring to the fermenter? We recommend you transfer half of your wort to your fermenter before applying inline oxygen (O2) to your wort transfer. If you apply O2 the whole time while transferring you are wasting O2.

Read more less

Our FE390A is just like the FE390, except we took off the barbs and left the fittings up to you. So many of our customers wanted this option, we decided to make it a kit and allow other people to get creative! Works well with our polysuphone QD's. The unit features a stainless thermometer, stainless tee, and a stainless oxygenation stone. The barb on the stone is 3/8". How long should I apply oxygen while transferring to the fermenter?  —  We recommend you transfer half of your wort to your fermenter before applying inline oxygen (O2) to your wort transfer. If you apply O2 the whole time while transferring you are wasting O2.

Read more less

This completely stainless, inline oxygenation system injects oxygen into your wort as it travels from your wort chiller to fermenter and allows you to read the temperature coming out of your wort chiller at the same time. It has a 3" Dial Stainless thermometer and a 2 micron diffusion stone. The inlets and outlets are 1/2" barb. The oxygen inlet is 3/8". It is the economical alternative to our completely sanitary, stainless oxygen system, PRO30.   How long should I apply oxygen while transferring to the fermenter? — We recommend you transfer half of your wort to your fermenter before applying inline oxygen (O2) to your wort transfer.  If you apply O2 the whole time while transferring you are wasting O2.  

Read more less

Allows for hand tightening. Nickel plated brass. Female Beer Thread (5/8" BSP).

Read more less

Made from 304 stainless steel.

Read more less

This is a replacement gas barb for the D1505 Tap. It is not for the beer to come out, most beer applications call for the 3/16" or 1/4" Tail Piece.

Read more less

For Making a tighter turn than a regular tail piece would. This stainless steel tailpiece will require 1-5/8" clearance behind the shank. ID - 3/16" OD - 1/4"

Read more less

Plastic hand pump with sanke tap built in. Also known as a keg coupler, coupling, or adapter.

Read more less

G-Type keg coupler for Anchor Steam and some other European kegs Pull-to-engage ergo lever handle Includes 3/8" OD barb for gas inlet Bass G style keg tap, also known as, keg coupler, coupling, or adapter. Fits Anchor Brewing kegs. Will also fit: Abbot Ale Anchor Liberty Ale Anchor Porter Anchor Steam Bass Pale Ale Blackthorne Cider Caffrey's Fuller's ESB Fuller's London Pride Grolsch Old Speckeled Hen Rouge Scottish Tennents Sir Perry William's Watney's Young's Young's Chocolate Stout Young's Oatmeal Stout Young's Ram Rod Bitter Young's Special London Ale

Read more less

Our deluxe drip counter top tray with louvered splash grate. Easily cleaned in the dishwasher or sink. The 8" width easily accommodates a double faucet tower. We label them deluxe because these trays were designed in house and are fabricated in the USA (get out of here! - no really they are). We use a brushed finish 304 stainless steel which is more expensive and difficult to work with - but looks beautiful. We carefully TIG weld the corners instead of sealing with a bead of silicone or using welding and then grinding which destroys the finish. 8 1/4''L x 5 3/8''W x 3/4''D

Read more less

This nut holds the gray compression gasket on the gooseneck. Together, in harmony, all three form an assembly.

Read more less

This is the small compression grommet that slips onto the gooseneck and seals it to the back of the shank inside a tower.

Read more less

This is the 1/4" elbow that comes out of the back of the shank inside of a tower.

Read more less

Create a taphandle of your very own and mount it with this easy to use threaded insert. Simply drill a 1/2" hole in the bottom of your wooden piece and thread the D1299 with a 3/8", 16 thread-per-inch bolt with a nut attatched (a coin can also be used). When you are finished, remove the bolt and mount your new taphandle to your faucet!

Read more less

The classy way to say "Don't you dare drink my beer!" Do you have a draft system and live with either teenage kids or thirsty roomates? This can potentially be a beer draining arrangement. When you leave for the weekend, stop the flow with a faucet lock. A quick easy locking system that attaches directly to the faucet. Please note - this lock will not work with Perlick 650SS, 630SS or Intertap faucets. For Perlick faucets, please see D1234.

Read more less

This is our Stainless Faucet, our Stainless 4" Shank with 1/4" nipple, and a Faucet knob, all combined into one. Please note that the actual useable length of the shank will be about 3 5/8 ", due to the hext nut and tail piece attatched to it. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

Read more less

Standard equipment on the 3,4 & 6" shanks we sell.

Read more less

This is the piece that mounts on the shank and covers the hole. Usually black on the shanks we sell but we offer this stainless collar because we have everything else!

Read more less

Comes with a back nut, plastic collar, hex nut, and a 1/4" barb. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 2 3/4". Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 5-1/4" - Total Length (Tip to Tip) 4-1/8" - Shank Length (Without Nut & Nipple) 3" - Thread Length 2-3/4" - Pass Through Length 1/4'' - Bore

Read more less

An amazing creamer style stout faucet shipped free in USA lower 48 states. Beer is forced through 5 tiny holes in the restrictor plate delivering that dense, delicous creamy head for which Guinness is so famous. Also great for use with lower carbonated Ales and Stouts. This is the faucet you would use with a Nitrogen/Co2 gas mixture in a Guinness style set up, but can also be used with a straight Co2 set up. 

Read more less

This industry standard faucet will last a lifetime and will not taint beer flavor. All parts are constructed from stainless steel, which is a strong, food grade metal. Normal faucets wear down with time as the chrome plating wears off and your beer is then exposed to brass. Brass can cause metallic flavors in your beer that don't taste good! This is the first all stainless faucet that has been produced with an affordable price tag. Buy a stainless faucet today and know that you won't have to purchase another faucet in the future. You can also rest easy that your beer will taste just like the brewer intended. Will fit all North American shanks and towers making it a great replacement faucet. Quick lever action. Polished stainless finish. 

Read more less

This piece sits between the Faucet and the Faucet Knob Lever Collar. It creates the friction when opening and closing the faucet.

Read more less

Stainless levers are used to replace brass levers because of their strength and ability to not react with beer. Manufactured by Tap-Rite. Unlike brass levers, which sometimes snap if the faucet is stuck, stainless levers are stronger and eliminate the risk they will break at the worst time.... when the beer is flowing. 

Read more less

Lever for faucet. Black knob screws onto this piece. They will often break if they become stuck and too much force is applied.

Read more less