Beer Making
-
Brewtools | F150 Unitank | 40-140L/10.5-36.9G Capacity
Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, heaters, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access. 2" TC dump and racking valves. BrewTools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 50" Max height w/o acc.: 57.9" Packaging size: 51.2" (h) x 23.6" (w) x 23.6" (d) Net weight: 123.5 lbs Gross weight: 136.5 lbs Tank diameter (inside): Ø19.7" Gross volume: 41.7 gal Max rec. volume: 40 gal Min rec. volume: 10.5 gal Volume, cone: 6.3 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-4" 1 pcs TC blind cap, 4" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 4" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 4" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.
$3,084.00
-
Brewtools | F80 Unitank | 5.2-19.8 Gallon Capacity | 20-75L
Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 43.3" Max height w/o acc.: 51.2" Packaging size: 44.5" (h) x 20.5" (w) x 20.5" (d) Net weight: 99 lbs Gross weight: 110 lbs Tank diameter (inside): Ø15.75" Gross volume: 22.7 gal Max rec. volume: 21.1 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-3" 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.
$2,467.00
-
Brewtools | F40 Unitank | 5.2-10.5 Gallon Capacity | 20-40L
Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d) Net weight: 84 lbs Gross weight: 98 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-3" 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.
$2,282.00
-
Brewtools | Starter Pack 3-valve Setup | For B40pro/B80pro/B150pro
This is the recommended accessories to get you started using the Brewtools pro systems. The package includes an efficient counterflow cooler, an extra 3-way valve to make you able to choose if you return the cooled wort to the tank creating a whirlpool or pump directly to the fermenter. The third 3-way valve makes it possible to clean the system without disconnecting hoses. Our adjustable dip tube is included in this package for optimal control during pumping to fermenter. A third sensor gives you exact measurements of the wort returning from cooling. The necessary fittings and accessories are also included. Fittings for connecting a sparge water heater is not included. Included: 2 pcs 3-way ball valve, TC34mm DN15 1 pcs Dip tube, Adjustable, TC34mm 1 pcs Counterflow Cooler, Pro 3 meter Silicone Tube 16x25mm, clear 3 pcs TC Gasket, 34mm, DN15, 5-pack 2 pcs TC34mm to 12mm hose barb 1 pcs TC34mm to 19mm hose barb, sensor holder 5 pcs TC34mm to 19mm hose barb 1 pcs Temp. Sensor, inline, M10 8 pcs Tri Clamp, 34mm 1 pcs TSP, 100g For User Manuals and support, please follow this link to Brewtools Docs.
$773.00
-
Brewtools | Starter Pack 2-valve Setup | For B40pro/B80pro/B150pro
This is the recommended accessories to get you started using the Brewtools pro systems. The package includes an efficient counterflow chiller, an extra 3-way valve to make you able to choose if you return the cooled wort to the tank creating a whirlpool or pump directly to the fermenter. A third sensor gives you exact measurements of the wort returning from cooling. The necessary fittings and accessories are also included. Included: 1 pcs 3-way ball valve, TC34mm DN15 1 pcs Dip tube, short 1 pcs Counterflow Cooler, Pro 1 pcs O-ring, Viton, 18x14x2mm 5-pack 3 meter Silicone Tube 16x25mm, clear 2 pcs TC Gasket, 34mm, DN15, 5-pack 2 pcs TC34mm to 12mm hose barb 1 pcs TC34mm to 19mm hose barb, sensor holder 4 pcs TC34mm to 19mm hose barb 1 pcs Temp. Sensor, inline, M10 6 pcs Tri Clamp, 34mm 1 pcs TSP, 100g For User Manuals and support, please follow this link to Brewtools Docs.
$667.00
-
Neoprene Jacket for BrewBuilt® X2 Uni Conical
Upgrade your base X2 Uni conical with a neoprene jacket to help insulate your fermentation and maintain stable temperatures. Not compatible with the X2 Jacketed Uni conical or X1 Uni conicals.
$59.99
-
KOMOS® Stainless Steel S-Style Keg Coupler with 8 mm Duotight Adapters
With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. 4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range. The KOMOS S-style coupler for European kegs can also be purchased bare if you prefer a different connection style. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$51.99
-
KOMOS® Stainless Steel S-Style Keg Coupler (With PRV) 1/4 in. Barb Connectors Included
1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS S-style coupler for European kegs can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$54.99
-
KOMOS® Stainless Steel S-Style Keg Coupler with Ball Lock Quick Disconnect (QD) Adapters
If your home draft system is a mix of ball lock kegs and European sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock. Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$74.99
-
Smart Brew | eXact Smart Brew Starter kit | Water Test Kit
The Smart Brew® Starter Kit comes prefigured with exactly what's needed to start testing your water for the perfect brew! Each kit includes the eXact iDip® 525 photometer with the following eXact® Strips: Total Hardness, Calcium Hardness, Total Alkalinity, pH, Chloride, and Sulfate. Each kit is packed in a rugged and durable plastic case with secure fasteners and padded compartments. The eXact iDip® app is available to download for Free on Apple App Store and on Google Play app store on Android. Compatible with iPhone, iPad, and iPod touch with the minimum iOS system version 9.0 and Android version 5.0 with Bluetooth® 4.0. Details: Standard navy blue plastic carrying case w/ Foam includes eXact iDip® 525 Photometer Cleaning brush Instruction manual 25 tests of each pH-II, High Range Total Hardness, Calcium Hardness, Total Alkalinity, Chloride III, Sulfate Free downloadable app with pre-installed tests: pH, Free Chlorine, Total Chlorine, Total Alkalinity. Additional test parameters will need to be purchased and downloaded in-app at $4.99 each or as a bundle (Smart Brew® Bundle) for $18.99
$394.99
-
Smart Brew | eXact Smart Brew Professional Kit | Water Test Kit
The eXact iDip® Professional Test Kit is the latest generation test kit that combines two state of the art water quality test instruments. The first is the revolutionary Level 1 NSF/ANSI-50 Certified eXact iDip® Smart Photometer System® which integrates patented 2–way wireless communication with any compatible iOS or Android smart device and has the potential to test over 40 water parameters. The second is the NEW eXact® pH+ Meter system which capitalizes on electrochemistry technology combined with Bluetooth connectivity. Preconfigured kit comes with exactly what's needed to start testing (excluding app software). Packed in a rugged and durable plastic case with secure fasteners and padded compartments. Compatible with iPhone, iPad, and iPod touch with the minimum iOS system version 9.0 and Android version 5.0 with Bluetooth® 4.0. Details: Standard navy blue plastic carrying case w/ Foam includes eXact iDip® 525 Photometer Cleaning brush Instruction manual 25 tests of each High Range Total Hardness, Calcium Hardness, Total Alkalinity, Chloride III, Sulfate eXact® pH+ Meter System pH, TDS, Salinity, Conductivity, and Temperature Free downloadable app with pre-installed tests: pH, Free Chlorine, Total Chlorine, Total Alkalinity. Additional test parameters will need to be purchased and downloaded in-app at $4.99 each or as a bundle (Smart Brew® Bundle) for $18.99
$744.99
-
Smart Brew | eXact Smart Brew | Water Test Refill Box
Contains refill bottles of each test for quick ordering. Box includes 1 bottle each of: Total Alkalinity(100 tests) pH (100 tests) HR Total Hardness (50 tests) Calcium Hardness (50 tests) Chloride (25 tests) Sulfate (50 tests).
$89.99
-
KOMOS® Double-Wide Kegerator | Stainless Double T Bar Tower - 8 Tap | Fan Cooled Stainless Tower | Digital Thermostat | Casters | Regulator | Fits 2 Half Barrel Kegs or 8 Corny Kegs
What makes KOMOS Double-Wide Kegerator better than the rest? Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components Faucets mount to a high-quality stainless steel tower, rather than cheap chrome plated tower Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Faucets sold separately Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers. Please note: this Double-Wide Kegerator with Stainless Double T Bar Tower package does not come with faucets as standard. Select one of the recommended options below to add faucets to your order, or purchase your preferred faucets separately.The included tower shanks are not compatible with Perlick Flow Control faucets. The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26-82°F, dual gas inlets at the back, stainless steel internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Feature Summary: Stainless Steel Air Cooled Double T Bar Tower Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Trays Stainless Steel Floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x 12m roll Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Detailed instructions on assembly and use Specifications: 35.4" wide 27.8" deep 34.3" with CO2 mount 33" Tall (fridge only) 35.5" with Caster wheels 49.25" with tower 51.5" with Casters and Tower 110V - 50 hz 0.9 Amp draw Optimal ambient temperature is 65°F - 80°F Internal Dimensions: 31.6" wide 20.4" deep 17.1" on the left side where the compressor sits 28.3" tall What Fits: 5 Gal. Torpedo Keg - 6 5 Gal. Slimline Torpedo Keg - 8 6 Gal. Torpedo Keg - 6 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 2 See below for the Kegerator Instruction Manual. Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
$1,499.99
-
KOMOS® Double-Wide Kegerator | Stainless Double T Bar Tower - 6 Tap | Fan Cooled Stainless Tower | Digital Thermostat | Casters | Regulator | Fits 2 Half Barrel Kegs or 8 Corny Kegs
What makes KOMOS Double-Wide Kegerator better than the rest? Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components Faucets mount to a high-quality stainless steel tower, rather than cheap chrome plated tower Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Faucets sold separately Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers. Please note: this Double-Wide Kegerator with Stainless Double T Bar Tower package does not come with faucets as standard. Select one of the recommended options below to add faucets to your order, or purchase your preferred faucets separately.The included tower shanks are not compatible with Perlick Flow Control faucets. The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26-82°F, dual gas inlets at the back, stainless steel internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Feature Summary: Stainless Steel Air Cooled Double T Bar Tower Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Trays Stainless Steel Floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x 12m roll Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Detailed instructions on assembly and use Specifications: 35.4" wide 27.8" deep 34.3" with CO2 mount 33" Tall (fridge only) 35.5" with Caster wheels 49.25" with tower 51.5" with Casters and Tower 110V - 50 hz 0.9 Amp draw Optimal ambient temperature is 65°F - 80°F Internal Dimensions: 31.6" wide 20.4" deep 17.1" on the left side where the compressor sits 28.3" tall What Fits: 5 Gal. Torpedo Keg - 6 5 Gal. Slimline Torpedo Keg - 8 6 Gal. Torpedo Keg - 6 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 2 See below for the Kegerator Instruction Manual. Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
$1,399.99
-
Siebel | Sensory Training Kit | Barrel Aged
The Barrel Aged Sensory Kit offers a total of 12 compounds that cover a variety of common flavors that may be associated with the process of ageing beer in barrels. Each vial allows for spiking 1 liter of beer. Visit the Siebel Sensory Station YouTube channel for a complete library of instructional and tasting videos. Flavors Included: Almond - marzipan, almonds Vanilla - custard powder, vanilla essence Exotic - coconut, vanilla, fruity, glue-like Woody - woody, resinous Tobacco - natural, woody, sweet, fruity, plum, spicy tobacco nuances, menthol-like Smoky - Smoky (smoked wood/smoked fish), Phenolic Peat-Like - Peat-like, Smoky, Woody, Medicinal Barnyard - Barnyard, Horsey, Brett-related flavors, Wine-like, Alcohol Coconut - Dill, Earthy, Coconut Caramel - Caramel, Spicy, Sweet, Almond Whiskey - Woody, Oakey, Coconut, Rum-like, Green Pineapple - Pineapple-like, Brett-related flavors, Rum-like, Tropical Fruit
$202.00
-
Siebel | Sensory Training Kit | Advanced Off-Flavor
The Advanced Off-Flavor Kit offers 18 different compounds that cover the full spectrum of off-flavors that are critical for beer tasters to know towards accurately evaluating beer. Each vial allows for spiking 1 liter of beer. Visit the Siebel Sensory Station YouTube channel for a complete library of instructional and tasting videos. Flavors Included: Acetaldehyde - green apple, cut grass Acetic acid - vinegar-like Butyric acid - putrid, baby vomit Caprylic acid - soapy, fatty, candle wax Contamination - sour & buttery D.M.S. - cooked corn, cooked vegetables Diacetyl - butter, butterscotch Earthy - geosmin, soil-like Grainy - husk-like, nut-like Indole - farm, barnyard Isovaleric acid - cheesy, old hops, sweaty socks Lactic acid - sour, sour milk Light Struck - skunky, toffee or coffee like Mercaptan - sewer-like, drains Metallic - metal, tin-like, blood Papery - cardboard, oxidized Spicy - cloves, all spice H2S - Sulphidic, Rotten Eggs
$240.00
-
Siebel | Sensory Training Kit | Essential Off-Flavor
The Essential Off-Flavor Kit contains 6 of the most frequently encountered off-flavors common to beers of all styles. Each vial allows for spiking 1 liter of beer. Visit the Siebel Sensory Station YouTube channel for a complete library of instructional and tasting videos. Flavors Included: Contamination - sour & buttery D.M.S. - cooked corn, cooked vegetables Diacetyl - butter, butterscotch Isovaleric acid - cheesy, old hops, sweaty socks Papery - cardboard, oxidized H2S - Sulphidic, Rotten Eggs
$140.00
-
Siebel | Sensory Training Kit | Craft
The Craft Sensory Kit is composed the 12 flavor compounds found in many unique styles of craft beer. Each vial allows for spiking 1 liter of beer. Visit the Siebel Sensory Station YouTube channel for a complete library of instructional and tasting videos. Flavors Included: Almond - marzipan, almonds D.M.S. - cooked corn, cooked vegetables Diacetyl - butter, butterscotch Ethyl hexanoate - aniseed, apple or liquorice Geraniol - floral, geranium flowers Grainy - husk-like, nut-like Hefeweizen - spicy & banana Isoamyl acetate - banana, peardrop Isovaleric acid - cheesy, old hops, sweaty socks Papery - cardboard, oxidized Spicy - cloves, all spice Vanilla - custard powder, vanilla essence
$202.00
-
Siebel | Sensory Training Kit | Regular
The Regular Sensory Training Kit offers a pre-selected mix of 12 of the most common flavors and aromatics found in beer. Each vial of the Kit brings a specific flavor, and allows for spiking 1 liter of beer. It is suitable for intermediate training of taste panels and groups of up to 10 people. Visit the Siebel Sensory Station YouTube channel for a complete library of instructional and tasting videos. Flavors Included: Acetaldehyde - green apple, cut grass Bitter - hoppy, bitter Contamination - sour & buttery D.M.S. - cooked corn, cooked vegetables Diacetyl - butter, butterscotch Ethyl hexanoate - aniseed, apple or liquorice Isoamyl acetate - banana, peardrop Isovaleric acid - cheesy, old hops, sweaty socks Light Struck - skunky, toffee or coffee like Metallic - metal, tin-like, blood Papery - cardboard, oxidized Spicy - cloves, all spice
$202.00
-
Siebel | Sensory Training Kit | Basic
The Basic Sensory Training Kit offers 4 sets of identical pre-selected vials, with 6 of the most common and important beer-related flavor compounds included each set. This kit is perfect for companies that do frequent sensory training panels using these core standards. It is also suitable for those looking for basic sensory training. Visit the Siebel Sensory Station YouTube channel for a complete library of instructional and tasting videos. Flavors Included: Acetaldehyde - green apple, cut grass Contamination - sour & buttery D.M.S. - cooked corn, cooked vegetables Diacetyl - butter, butterscotch Isoamyl acetate - banana, peardrop Papery - cardboard, oxidized
$273.00
-
Siebel | Sensory Training Kit | Comprehensive
The Comprehensive Sensory Training Kit offers the most important flavors and aromatics found in beer. It is composed of 25 vials, each with a specific flavor and concentration that allows for spiking 1 liter of beer. While breweries with established tasting panel structures will find this kit extremely valuable, it can also be used for “taster calibration” by brewers’ guilds, homebrew groups and beer judges. Visit the Siebel Sensory Station YouTube channel for a complete library of instructional and tasting videos. Flavors Included: Acetaldehyde - green apple, cut grass Acetic acid - vinegar-like Almond - marzipan, almonds Bitter - hoppy, bitter Butyric acid - putrid, baby vomit Caprylic acid - soapy, fatty, candle wax Contamination - sour & buttery D.M.S. - cooked corn, cooked vegetables Diacetyl - butter, butterscotch Earthy - geosmin, soil-like Ethyl acetate - solvent-like, nail polish remover Ethyl hexanoate - aniseed, apple or liquorice Geraniol - floral, geranium flowers Grainy - husk-like, nut-like Hefeweizen - spicy & banana Indole - farm, barnyard Isoamyl acetate - banana, peardrop Isovaleric acid - cheesy, old hops, sweaty socks Lactic acid - sour, sour milk Light Struck - skunky, toffee or coffee like Mercaptan - sewer-like, drains Metallic - metal, tin-like, blood Papery - cardboard, oxidized Spicy - cloves, all spice Vanilla - custard powder, vanilla essence
$273.00
-
Replacement Lid for Megamouth Torpedo Keg
Replacement lid for the Megamouth series ball lock Torpedo Kegs. Includes o-ring and PRV rated to 85 psi. This is an extra-large corny style keg lid that will only fit Megamouth Torpedo Kegs. For standard corny keg lid, see here.
$29.99
-
CellarScience® PRIME Dry Yeast | Cask & Bottling Yeast | Premium Beer Yeast
Developed specifically for bottle conditioning. PRIME has a high alcohol tolerance, neutral flavor, ferments quickly, and has excellent flocculation to form a compact sediment at the bottom of the bottle, keg, or barrel. Does not ferment maltotriose so will not dry your beer out further and will only ferment the sugar you add. Every batch is PCR tested to ensure quality. Dosage: Use at a rate of .38 grams per gallon or 1 gram per liter. Directions: Mix the desired amount of Dextrose in 5x its weight of water, boil, cool to approximately room temperature, and mix the sugar solution into your beer. Direct Pitch or Rehydrate: To hydrate yeast, first, sanitize yeast brick and scissors. Use 10 grams of sterilized tap water, between 85-95°F (29-35°C), per gram of yeast. Sprinkle yeast onto the water. Allow the slurry to stand undisturbed for 20 minutes and then swirl. Use small amounts of beer to adjust to within 10°F (6°C) of beer temp. Mix yeast slurry into beer. Allow carbonation to develop for two weeks between 60-78°F (16-26°C) before testing for adequate carbonation. Optimum Fermentation Temp: 53-77°F Flocculation: Very High Attenuation: 95-100% Gluten-free
$4.99
-
Heavy Duty False Bottom | BrewZilla | DigiBoil | 65L
NOTE: This accessory is designed exclusively for 3-vessel brewers who want to use the BrewZilla or DigiBoil as a mash tun. It is not meant to be used alongside a malt pipe, and it is not intended to be an upgrade or replacement to the BrewZilla's standard false bottom protection screen. If you're a 3-vessel brewer and want to use the BrewZilla or DigiBoil purely as a mash tun, this is false bottom will give you more volume compared to mashing with a malt pipe. Designed for use with DigiBoil electric kettles or BrewZilla all-in-one systems. Unlike two-piece false bottoms you may find, this unit is welded together for maximum strength. It will easily withstand as much grain weight as you could possibly fit in the vessel. Features welded handles to easily remove the false bottom when cleaning. Compatible with 65L DigiBoils and Gen 3/4 65L BrewZillas. Dimensions: Diameter: 15.35" (390 mm) Height: 1.88 (48 mm) Approximate Dead Space: 1.5 gal (5.7 L) KegLand Part Number: KL27717
$87.99
-
Heavy Duty False Bottom | BrewZilla | DigiBoil | 35L
NOTE: This accessory is designed exclusively for 3-vessel brewers who want to use the BrewZilla or DigiBoil as a mash tun. It is not meant to be used alongside a malt pipe, and it is not intended to be an upgrade or replacement to the BrewZilla's standard false bottom protection screen. If you're a 3-vessel brewer and want to use the BrewZilla or DigiBoil purely as a mash tun, this is false bottom will give you more volume compared to mashing with a malt pipe. Designed for use with DigiBoil electric kettles or BrewZilla all-in-one systems. Unlike two-piece false bottoms you may find, this unit is welded together for maximum strength. It will easily withstand as much grain weight as you could possibly fit in the vessel. Features welded handles to easily remove the false bottom when cleaning. Compatible with 35L DigiBoils and Gen 3/4 35L BrewZillas. Dimensions: Diameter: 11.61" (295 mm) Height: 1.77 (45 mm) Approximate Dead Space: 0.79 gal (3 L) KegLand Part Number: KL27700
$76.99
-
MB® Replacement Seal Kit for Two Stage Heat Exchanger | 15 to 30 bbl
Replacement seals for 6m² Two Stage Heat Exchanger sized for 15 to 30 bbls.
$439.99
-
MB® Replacement Seal Kit for Two Stage Heat Exchanger | 3.5 to 15 bbl
Replacement seals for 3m² Two Stage Heat Exchanger sized for 3.5 to 15 bbls.
$329.99
-
KOMOS® | Flare Fitting | 1/4" Swivel Nut for 5/16" Barb | 4-Pack
Swivel nut for 1/4 in. flare fitting connections. For use with 5/16 in. barbs (KEG1109). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Made from nickel plated brass. Comes in a convenient zip lock bag.
$8.79
-
KOMOS® | Flare Fitting | Stainless 5/16" Barb | 4-Pack
Stainless steel 5/16 in. barb for flare fitting connections. For use with 1/4 in. swivel nut (KEG1110). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Comes in a convenient zip lock bag.
$8.79
-
KOMOS® | Flare Fitting | 1/4 in. Swivel Nut for 1/4 in. Barb | 4-Pack
Swivel nut for 1/4 in. flare fitting connections. For use with 1/4 in. barbs (KEG1108). If you're connecting to stainless steel or brass, you will also need a nylon flare washer to form a seal. Made from nickel plated brass. Comes in a convenient zip lock bag.
$6.59
-
KOMOS® | Stainless Steel Tailpiece | 5/16 in. | 4-Pack
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 5/16 in. tailpiece is commonly used with 1/4 in. ID draft tubing for a tight fit. Comes in a convenient zip lock bag.
$12.49
-
KOMOS® | Stainless Steel Tailpiece | 1/4 in. | 4-Pack
Compatible with either your sanke keg coupler or draft shank and held in place with a hex nut & gasket. This 1/4 in. tailpiece is commonly used with 3/16 in. ID draft tubing for a tight fit. Comes in a convenient zip lock bag.
$12.49
-
KOMOS® | Tailpiece, Hex Nut and Gasket Set | Stainless | 1/4 in. Barb
Connect draft tubing to your keg coupler or faucet shank. Recommended for 3/16" or 1/4" ID draft lines. Tailpiece and hex nut are made of stainless steel.
$6.99
-
KOMOS® | Sanke Keg Coupler Probe Washer | D-Style | 3-Pack
Replacement probe washers for D-Style Sanke keg couplers. Comes in a convenient zip lock bag.
$3.79
-
KOMOS® | Beer Faucet Tap Ferrule | Chrome | 5-Pack
For repairing a broken tap handle of building one from scratch. The tap ferrule is the piece you'll see at the bottom of most tap handles and is where the handle is screwed onto the faucet lever. You will also need hanger bolts (D2532) to screw the ferrule into a wood tap handle. 5/16" top threads and 3/8" bottom threads. Pack of 5. Comes in a convenient zip lock bag.
$15.49
-
KOMOS® | Beer Faucet Shank | 3.5 in. | Welded Barb
Chrome plated brass shank comes with a back nut, plastic collar, and a welded 3/16" nipple. This beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer. The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/2" - Shank Length (Without Nipple) 2-5/8" - Thread Length 2-3/8" - Pass Through Length 3/16'' - Bore
$19.99
-
KOMOS® | Stainless Beer Faucet Shank | 3 in. | Hex Nut & Barb
Stainless steel shank comes with a back nut, plastic collar, and a 3/16" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer. The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple
$21.99
-
KOMOS® | CO2 Regulator Gasket | Silicone Stem O-Ring | 2-Pack
Silicone regulator stem o-ring. Commonly used on Taprite regulators which have an o-ring located where the regulator stem mates with the CO2 cylinder. Comes in a convenient zip lock bag. NOTE: These are not intended for use with the KOMOS CO2 Regulator. For the correct KOMOS Regulator replacement gasket, please see D1089.
$5.49
-
Steam Condenser Set | 2 in. T.C. | BrewZilla | DigiBoil
Made from high quality 304 Stainless Steel, this condenser lid is ideal for apartment or basement brewers who struggle managing steam and condensation during brewday. Easy to use and assemble, can be used with a wide range of configurations. Comes with removable end cap for adding hops, yeast nutrient or whirlfloc during the boil. (Use gloves, it will be hot!). This steam condenser set can be compatible with the 35L or 65L BrewZilla/DigiBoil with the stainless distillation lid and 2 Inch Bulkhead. This unit can allow brewing indoors without that pesky sticky steam gumming up your freshly painted interior! The End Cap can be removed for brewing salts/hops and other brewing essentials to be added during the boil. Please note hot steam through this port can lead to serious scalding, please use heatproof gloves. With the new Pro Distillation Lid, the condenser can be attached directly to the 35L unit's 2" T.C. ferrule or to the 65L unit's 4" T.C. ferrule using a 4" x 2" T.C. reducer. The Pro Distillation Lid also features a 3" sight glass disc that can be removed to address foaming issues or to add hops or other boil additions. Not only will you get to the boil faster, but you will use less power overall to maintain a rolling boil as there will be less area for the heat to escape. No need to install inside a kitchen, or in the garage with a special range hood. Simply attach this to the Condenser Lid and run your kitchen tap or garden hose to the Duotight-compatible inlet. You don't not need super-fast flow rate to cool boiling steam into liquid. Different to distillation where you require the distillate to be under a certain temperature so that ethanol doesn't evaporate from the liquid at a high rate, with boiling wort you just need enough to form a liquid! Pretty simple. Eco-Friendly option if you have the means to save/collect the coolant water. Can be re-used on the garden or for cleaning later on. Please note the water discharging will be very hot! The Spray head can condense 0.42 gal (1.6 L) per minute while connected to 100 psi mains water. Caution: You will need to remove the Steam Condenser when you reach boil to manage the hot break and ensure you don't have a boil over when you reach boiling temperatures. Once you've completed that step, you can reattach the Condenser and leave it in place for the remainder of the boil. Warning: It is important that the output tube for this steam condenser is open to atmosphere. This will allow the condensed steam to exit freely. DO NOT put a valve on the liquid output or restrict the condensed steam in any way as this may cause your brewery to develop vacuum and implode or explode. DO NOT immerse the tube for the condensed steam in water. The outlet hose must be open to atmosphere and the drips of condensed steam must drip into your collection bucket freely. You Will Also Need: Tri-Clamp Distillation Lid OR Standard Distillation Lid for 35L or 65L BrewZilla / DigiBoil With 2" T.C. Weldless Bulkhead (H707) OR Pro Distillation Lid for 35L or 65L BrewZilla / DigiBoil 35L Lid connects directly 65L Lid requires 4" x 2" TC Reducer 6.35 mm Monotight Adapter (or you can clamp directly to the inlet) Kit Includes: 5 x 2" Tri-Clamps 5 x 2" Tri-Clamp Silicone Seals 1 x 13.7" (340 mm) Long 2" T.C. Tee 1 x 7.8" (200 mm) Wide 2" T.C. Tee 1 x 2" T.C. End Cap 1 x 2" T.C. to 6.35 mm Monotight elbow cap with elongated spray head mister 1 x 2" T.C. x 0.47" (12 mm) Barb – Suitable for 3/8" (10 mm) ID Silicone tubing Some of these fittings are not sold separately NOTE: The kit does not include the Monotight adapter and garden hose QD shown in the example photo. The text in the photo showing the Duotight compatible inlet elbow states 6.5 mm; it is actually 6.35 mm. KegLand Part Number: KL22842
$186.99
-
Replacement Airlock Cap for FermZilla Lid
Replacement black PCO1881 cap for the FermZilla lid. This is the cap with airlock hole and grommet. For the solid cap, see here.
$2.19
-
Replacement Solid Cap for FermZilla Lid
Replacement black PCO1881 cap for the FermZilla lid. This is the solid cap. For the replacement cap with airlock hole and grommet, see here.
$1.69
-
Brewtools | MiniChilly 17 | Multi-Tank Glycol Chiller | 1 HP
The Quantor MiniChilly 17 is highly recommended by Brewtools for chilling their F-series Unitanks. These glycol chillers are compact, high-quality units often used in professional settings. Made from stainless steel components and easy to install. They feature an integrated pump with a stirring function that ensures even temperatures throughout the reservoir. Rather than individual pumps for each fermenter, this unit is intended to be provide cooling solution to a single chilling loop where each fermenter will call for glycol circulation independently via solenoid valves. The MiniChilly 17 is recommended for up to 8 x 150L fermentation tanks of which 3 are cold crashed, or up to 4 x 300L fermentation tanks of which 1 is cold crashed. Check out the Brewtools cooling system page for setup details and recommended accessories for building a chilling loop with the MiniChilly 17. Specifications: Controller: EWplus 961 Power connector: Schuko - C19 Power: 790W (1+ HP) Refrigerant: R290 (Propane) Cooling capacity @ 32°F: 1000W (3412 BTU/hr) Cooling capacity @ 59°F: 1650W (5627 BTU/hr) Tank volume: 12.68 gal Dimensions: 29.5" x 16.5" x 23.6" 115V Manufactured in Germany by Quantor/Kreyer. NOTE: The product must stand still 24 hours before use after installation.
$4,069.99
-
FermZilla Tri-Conical Butterfly Valve - 2 in. x 2 in. T.C.
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 2" T.C. fittings. Primarily designed to be used with the FermZilla T.C. Pressure Lid and 2" Hop Bong for oxygen-free dry hopping. If you're planning on putting your FermZilla Tri-Conical or All Rounder in a Fermentation Chamber, you will want to allow for 420 mm (16.5") of clearance measured from the base of the ring collar to a comfortable level below the chamber ceiling so you can pull the PRV to purge oxygen from the hop bong. KegLand Part Number: KL27564
$43.99
-
FermZilla Tri-Conical Butterfly Valve - 2 in. x 3 in. T.C.
Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 2" or 3" T.C. fittings. This valve comes standard on the Tr-Conical FermZillas where the bottom of the tank attaches to the collection container. KegLand Part Number: KL26505
$43.99
-
Replacement PET Tank for 55L Tri-Conical FermZilla | Gen 3
Replacement PET Tank for the 55L Tri-Conical FermZilla with tri-clamp bottom port. Normal wear and tear may lead to stress marks or other potential points of failure when the tank is used under pressure. We recommend visually inspecting the unit for signs of wear every 6-12 months, and conducting a hydro test every 2 years. The hydro test process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank. KegLand Part Number: KL28257 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.
$98.99
-
KOMOS® Double-Wide Kegerator Replacement Door
Scuffs, scratches, and dings happen. Keep your KOMOS Double-Wide kegerator looking brand new with this replacement door.
$82.99
-
KOMOS® Double-Wide Kegerator | Replacement Guard Rail
Replacement guard rail for the KOMOS Double-Wide Kegerator. Not compatible with any other KOMOS kegerator models.
$41.99
-
Drip Tray | Countertop Drip Tray | Removable Grill | Stainless | 19.6 in.
Stainless steel counter top style drip tray. Removable grill and pressed holes for easy plumbing. Dimensions: 19.6" Long x 6.7" Wide x 0.6" Deep Kegland Part number: KL13178
$43.99
You have seen 1872 out of 2756 products