Beer Making
-
Gasket | 10 Gal Mash Tun False Bottom
This silicone gasket is for Ss InfuSsion 10 gal false bottoms. Does not fit on Norcal false bottoms.
$11.95
-
Blow Off Cane | 3 in TC for Half BBL Chronical
This is a 304 stainless steel blow off tube for Ss Brewtech 1/2 barrel Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.
$70.95
-
Blow Off Cane | 3 in TC for 14 Gal Chronical
This is a 304 stainless steel blow off tube for Ss Brewtech 14 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a built-in relief valve. The two-piece cane has an outer diameter of 15 mm (approx. 9/16") and 3/8" NPT where they connect. 3" TC gasket and clamp not included.
$67.95
-
Blow Off Cane | 3 in TC for 7 Gal Chronical
This is a 304 stainless steel blow off tube for Ss Brewtech 7 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.
$64.95
-
Speidel Jacketed Conical Fermenter | Full Jacket | Pressurizable | Stainless Steel | 625L | 5 bbl
We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of beer. Convenient top hatch makes cleaning and oaking easy. Heavy duty sealing mechanism and thick gasket ensure an air tight seal. The inside is finished to Speidel quality standards. Bottom drain fittings are 1.5" Tri-Clamp. Conical tanks come standard with legs. Also this tank specifically is made to handle up to 1.2 bar (17.4 psi). Key Features Full Jacket - Fermenters are equipped with a jacket that covers all accessible areas of the tank. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY41) for complete temperature control! Included Options - Features 1.5" T.C. outlets (One complete drainage at the bottom of the cone, one in the middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. These are equipped with hardware at the factory, one has a sample valve; the other has a thermowell/thermometer combination. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively means cleaning is too easy. Watch the Krausen wash right off! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Thickness - Speidel tanks are on average around 25% thicker than Italian manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - Tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Features Full Volume of 625l (165 gal). Perfect for fermenting single batches brewed on the Speidel 500L Braumeister Handles pressures up to 1.2 bar (17.4 psi) - use as a bright tank or unitank! 1.5" T.C. Drain, Racking Port, and Lid outlet. 8.5" Top hatch for easy cleaning and additions. 2 X DIN10 Fittings w/ Sample Valve and Thermowell/ Thermometer combo Dimensions: 32.25" D x 85" H (820mm D x 1661mm H) Please note: this tank does not include the 1.5" TC Tee with pressure gauge and valve pictured in the top right of the product photo. See our CONP775listed below under "You Might Also Need".
$8,249.99
-
Braumeister WiFi Unit Upgrade
The Braumeister by Speidel is an amazing brewing system, allowing all-grain electric brewing in a compact, all-in-one design. Now, the Braumeister can provide an even more ideal brew day, by controlling the entire brew process from your Windows 7 or higher device! The Braumeister Mobile Wifi Unit is a modular internet connectivity device from Speidel, displaying temperatures and times, running all aspects of the system, as well as updating firmware as released! Supervises the brewing process within the wireless local area network via a wireless internet router Updates the Braumeister control system to the latest software (firmware) Works with all 10L to 500L Braumeisters with a 2015 control unit or later Network standard: IEEE 802.11 b/g/n Requires PC with at least windows 7 or higher Please Note: This unit will only function on Speidel Braumeisters with Generation 2 Black Controllers (2015+).
$459.99
-
Braumeister - 20 L Short Malt Pipe
This shortened malt pipe will enable our 20L Braumeister to brew 10L batches (from 5 gallons to 2.5 gallons). The way these Braumeisters function during the mashing stage, a smaller batch than 20L is usually not an option. By utilizing this shortened mash pipe, you can now brew either a 2.5 or 5 gallon batch with your 20L Braumeister!
$219.99
-
Crystal Hop Rhizome
Rhizomes are now in stock and orders are being fulfilled. If you haven't ordered your rhizomes yet, this is your last chance till next season! 4.0-6.0% AA. Grows well in all climates. Crystal is related to Mt. Hood and Liberty A very clean aroma hop that produces a mild, floral and spicy aroma. Due to it being mild and clean, this hop variety can be used in a variety of beer styles, including: Lagers, Kolsch, ESB, Pilsners, Pale Ales, IPAs, and Belgian Ales. Rhizomes should be planted immediately for best results. If your area is still experiencing frost then you can plant them in a planter indoors until it is safe to transplant outside. The first years crop will generally be smaller than subsequent years. Since these are live plants, we cannot guarantee they will grow, so we recommend buying two of each type to help ensure their success. Shipping Restrictions: Due to agricultural restrictions, we can only ship rhizomes to addresses that are in the United States, excepting Hawaii, Oregon, Washington, and the counties of Bonner and Kootenai in Idaho. Unfortunately, we cannot ship these to international locations including APO/FPO addresses.
$6.99
-
Lid | Half bbl Chronical Domed with 3 in TC
This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
$83.95
-
Lid | 14 gal Chronical Domed with 3 in TC
This is a dome lid for Ss Brewtech 14 gal Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.
$76.95
-
Gasket | Brew Bucket Mini Lid Gasket
Gasket replacement for the Ss Brewtech Brew Bucket Mini. Made with brewer's grade silicone.
$11.95
-
Brew Bucket Mini - Replacement Lid
Ss Brewtech Brew Bucket Mini replacement lid. Comes with a gasket and 17mm punched hole for an airlock or tubing. Made from 304 stainless steel.
$37.95
-
Cap | 3 in TC with 1/2 in Blow-Off
If you bought a 3" TC dome lid for your standard Chronical this covers up that large 3" tri clamp opening. 1/2" tubing or an airlock and #2 stopper fit nicely in the 17mm hole. This cap comes standard with Brewmaster Chronicals and only fits on a 3" tri clamp flange. Comes with a 1/2" hose barb and pressure relief valve. 3" tri clamp gasket and clamp not included.
$39.95
-
Hose Barb | 1/2 in Re-Circ T-Barb
This Ss Brewtech fitting helps with recirculation in your mash tun. It has a 1/2" FPT on the mash tun side, a 1/2" MPT on the opposite side, and a 1/2" hose barb on the bottom of the tee. Made with 304 stainless steel.
$18.95
-
Hose Barb | 3/8 in to 1/2 in FPT Knurl
Used along with the Ss recirculation bulkhead, this fitting adds a 3/8" hose barb on your mash tun. It attaches with a 1/2" FPT knurled locking nut and is required if you are using the Ss recirculation manifold. Made from 304 stainless steel and silicone O-rings included.
$13.95
-
Ss BrewTech | Casters | Chronicals & Brites
These caster wheels are designed to move empty half bbl and under vessels. 1BBL vessels should use HD | Casters. Older 7 gal Legacy Chronicals do not have threaded feet and use the Caster Boots instead. Kit includes 3 or 4 casters with leveling washers Compatible with Chronicals series, Unitanks, and Brite Tanks 3/8" x 1.5" stem Includes brake High-quality PP wheels Double bearing wheels Click here for Quick Ref *Not intended to be moved when full, damage can occur. *Not for Nano Jacketed Tanks.
$39.95
-
Legacy FTSs | Half BBL Chronical Coil Extensions | Ss Brewtech
Works with older threaded coil kits like FTSs | Brew Bucket and FTSs | Chronical. Not compatible with TC lid coils like the Chilling Coil Kit or Chronical 2.0. Extends the lid-mounted FTSs coil into the fermenter which allows for partial batch brews. 304 Stainless Steel Long Extensions: 24 cm total length Partial Batch Sizes: 14 gal Chronical = 5 gal batch Half bbl Chronical = 7 gal batch
$64.95
-
Legacy FTSs | 14 gal Chronical Coil Extensions | Ss Brewtech
Works with older threaded coil kits like FTSs | Brew Bucket and FTSs | Chronical. Not compatible with TC lid coils like the Chilling Coil Kit or Chronical 2.0. Extends the lid-mounted FTSs coil into the fermenter which allows for partial batch brews. 304 Stainless Steel Long Extensions: 24 cm total length Partial Batch Sizes: 14 gal Chronical = 5 gal batch Half bbl Chronical = 7 gal batch
$39.95
-
FTSs | Brew Bucket and 7 Gal Chronical Coil Extensions
These chiller coil extensions extend the length of the Ss Brewtech FTSs chiller coil for Brew Bucket and 7 gallon Chronical fermenters. Very useful if you brew partial batches and/or there is a cool ambient temperature forcing you to mostly heat your fermenter. Mounts under the lid to drop the coils further down. Made from 304 stainless steel and leak tested.
$33.95
-
MTSs | Temp Control for InfuSsion Mash Tun
The MTSs is designed for use with Ss Brewtech’s Infusion Mash Tun. During extended Mash periods or in relatively cold ambient temperatures, the mash will naturally drop in temperature. With the MTSs you will be able to provide better controlled temperatures during the mash saccharification process. Holding a consistent saccharification temperature will insure you are making the beer and flavor profiles you planned to produce. The MTSs is a low wattage silicone heater pad, which is bonded to the underside of the 5 degree sloped bottom on your Mash Tun using a strong adhesive backing on the heater pad. The heater is controlled with a 12 volt digital temp controller. You simply set your target temperature and the heater will cycle on and off to maintain your set point. This system is NOT designed for heating water to strike temp and/or step mashing, though it can help with fine tuning your strike water temp those last few degrees and/or maintaining your strike water temp while you are preparing your grist or balancing your water chemistry.
$105.95
-
Sparge Arm | InfuSsion Mash Tun
Another high quality intuitive piece of brewing gear from Ss BrewTech, the Ssparge Arm! Simple design, with adjustable height and flow rate, this is a necessary add on for the Ss InfuSsion Mash Tuns. Incredibly easy to use: Simply choose and thread on a flow rate disk, clip the unit to your mash tun, set the height just above your grain bed, and get brewing!! See the Documents tab above for a more detailed guide to use. For USE ONLY ON Ss MASH TUNS (10/20 gal) 304 Stainless Steel construction Designed for gravity feed from HLT Or hook your own pump / flow control valve 3/8” diameter stainless tubing 3/8" barb on inlet of tubing Custom silicone handle mount for Ss Mash Tun Easily adjust height of sparge head up / down Uniform liquid dispersion fom sparge head
$70.95
-
XpressFill XF2500 | Carbonated Beverage Bottle Filler | 2 Spout
Counter pressure bottle filler for carbonated beverages Flow stops automatically at the perfect height in the bottle neck every time, regardless of bottle variations Accommodate bottles up to 13.5" tall and up to 4" in diameter Made to order in the United States The Carbonated Beverage Filler is a counter-pressure machine that fills bottles with pre-carbonated beverages without losing carbonation; The XpressFill Carbonated Beverage Filler uses a high-tech sensor probe that shuts off the fill at the perfect height in the bottle neck every time, regardless of bottle variations. Even though this machine is designed for carbonated beverages, it can also be used for still products as long as they are fed to the filler using a lightly pressurized keg or pump. That means that you can use this for your normal bottling as well as for those special bottle-conditioned beers too! The Carbonated Beverage Filler is also suitable for filling Charmat-style sparkling wines, at a maximum operating pressure of 60 psi. The filler will accommodate bottles up to 4 inches in diameter and up to 13.5 inches tall. This covers most standard sized 12 oz, 22 oz and 750 mL bottles. Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 200 Bottles per Hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Maximum Bottle Dimensions: 4" D x 13.5" H Maximum Operating Pressure: 60 psi Weight: 32 lbs Dimensions: 16 inches wide x 17 inches high x 15.5 inches deep Requires 1.5A of 115V 50/60Hz power
$3,895.00
-
Pompous Ass Ale | Stone Arrogant Bastard Ale® Clone | 5 Gallon Beer Recipe Kit | All-Grain
Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits Includes Magnum and Chinook hops Estimated ABV: 7.1% Estimated IBUs: 68-72 Makes 5 gallons of finished beer Big, bold, and full of flavor. This rendition of one of the most egotistical beers in America is not for the light-beer lover. In fact, if you prefer a beer that looks and tastes more like water, we recommend you leave this page immediately. Your feelings might get hurt just reading about it... Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits. The clean bitterness from Magnum hops allows the rich flavors of Aromatic, Special B, and Caramel Munich malts to control your taste buds. The aromatics of Chinook hops blend perfectly with these malts, creating an intense combination of confusion and satisfaction at the same time. After your first sip, if you're thinking "Whoa. That was interesting, intense, & delicious!" you know you brewed it right! Makes 5 gallons Estimated Original Gravity: 1.066-70 SRM (Color Range): 16-18 IBUs: 68-72 Estimated Alcohol Percentage: 7.1% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
$35.99
-
Topped With Hops Double IPA | The Alchemist Heady Topper® Clone | 5 Gallon Beer Recipe Kit | All-Grain
Packed with almost a pound of hops, our Heady Topper® clone is bursting with hop flavor and aroma Includes Apollo, Centennial, Columbus, Simcoe®, and Amarillo® hops as boil and dry hop additions Estimated ABV: 8.1% Estimated IBUs: 100+ Makes 5 gallons of finished beer Based off of one of the most exceptional east coast beers (in our humble opinion) on the market, this double IPA recipe instantly became one of our favorite ingredient kits! Our version of a Heady Topper clone recipe is packed with almost a pound of hops, and is definitely a beer that will have hopheads in hopheaven. One of the first things we noticed when pouring this beer into the pint glass was the aroma. With a dry hop addition consisting of Apollo, Centennial, Columbus, Simcoe®, and Amarillo® hops, we weren't necessarily surprised. Impressed is more like it. A balanced malt profile helps to tame the bitterness, allowing the hop flavor and aroma to be the true star in this recipe. If you're a fan of IPAs, double IPAs, or anything having to do with hops, this is one beer you need to brew! Makes 5 gallons Estimated OG: 1.073-1.078 SRM (Color Range): 9 IBUs: 110 Estimated Alcohol Percentage: 8.1% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts. Simcoe® is a registered trademark owned by Yakima Chief Hops, LLC. Amarillo® is a trademark owned by Virgil Gamache Farms, Inc.
$57.99
-
I Heart IPA | Bell's Two Hearted® IPA Clone | 5 Gallon Beer Recipe Kit | All-Grain
An amazing Centennial hop bomb of an IPA modeled after Bell's Brewery Two Hearted® American IPA Includes 100% Centennial hops from boil to dry hop Estimated ABV: 5.8% Estimated IBUs: 45-48 Makes 5 gallons of finished beer An amazing IPA derived from one of our favorites, Bell's Two Hearted, the I Heart IPA is a true Centennial hop bomb! Using Centennial as the bittering, aroma, and dry hop additions gives you a true understanding of how incredible and universal this hop can be. Light in color and body, the malt character hides a little, allowing the burst of Centennial flavor and aroma shine. Our Bell's Two Hearted clone recipe has a slightly lower original gravity than the original. Coming in at right around 6% ABV, this isn't one of those IPAs that will make you shy away from a second! Makes 5 gallons Estimated Original Gravity: 1.058-1.062 SRM (Color Range): 5-7 Estimated IBUs: 45-48 Estimated Alcohol Percentage: 5.8% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All grains will come milled, unless you select unmilled base malts.
$33.99
-
Pompous Ass Ale | Stone Arrogant Bastard Ale® Clone | 5 Gallon Beer Recipe Kit | Extract
Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits Includes Magnum and Chinook hops Estimated ABV: 7.1% Estimated IBUs: 68-72 Makes 5 gallons of finished beer Big, bold, and full of flavor. The Pompous Ass Ale is a rendition of one of the most egotistical beers in America, and is not for the light-beer lover. In fact, if you prefer a beer that looks and tastes more like water, we recommend you leave this page immediately. Your feelings might get hurt just reading about it... Our Arrogant Bastard clone easily has one of the most complex malt profiles of any of our kits. The clean bitterness from Magnum hops allows the rich flavors of Aromatic, Special B, and Caramel Munich malts to control your taste buds. The aromatics of Chinook hops blend perfectly with these malts, creating an intense combination of confusion and satisfaction at the same time. After your first sip, if you're thinking "Whoa. That was interesting, intense, & delicious!" you know you brewed it right! Makes 5 gallons Estimated Original Gravity: 1.066-70 SRM (Color Range): 16-18 IBUs: 68-72 Estimated Alcohol Percentage: 7.1% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled. Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
$44.99
-
I Heart IPA | Bell's Two Hearted® IPA Clone | 5 Gallon Beer Recipe Kit | Extract
An amazing Centennial hop bomb of an IPA modeled after Bell's Brewery Two Hearted® American IPA Includes 100% Centennial hops from boil to dry hop Estimated ABV: 5.8% Estimated IBUs: 45-48 Makes 5 gallons of finished beer An amazing IPA derived from one of our favorites, the I Heart IPA is a true Centennial hop bomb! Using Centennial as the bittering, aroma, and dry hop additions gives you a true understanding of how incredible and universal this hop can be. Light in color and body, the malt character hides a little, allowing the burst of Centennial flavor and aroma shine. Our Bell's Two Hearted clone recipe has a slightly lower original gravity than the original. Coming in at right around 6% ABV, this isn't one of those IPAs that will make you shy away from a second! Makes 5 gallons Estimated Original Gravity: 1.058-1.062 SRM (Color Range): 5-7 Estimated IBUs: 45-48 Estimated Alcohol Percentage: 5.8% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”. For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled. Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.
$44.99
-
Imperial Yeast | A20 Citrus Ale | Beer Yeast | Double Pitch | 200 Billion Cells
Dry Hop is a blend of A20 Citrus and A04 Barbarian. When this blend goes to work on your hoppy beer, the hop aroma blows up. The combination of these strains produces amazing aromas of citrus, peach, and apricot that will accentuate your IPA, pale ale, and any other hop-driven beer. This blend contains a strain that tests positive for the STA1 gene via PCR analysis and is therefore considered to be Saccharomyces cerevisiae var. Diastaticus. This yeast strain is not a genetically modified organism (GMO). Attenuation: 73-75% Flocculation: Low Alcohol Tolerance: 10% ABV Optimum Fermentation Temp: 67-80°F Cell Count: 200 Billion Similar Strains: WLP644 Please Note: For best results we Always recommend ordering an Ice Pack with your liquid yeast. Ice Packs can be found below in the "You might Also Need" section. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$12.99
-
Imperial Yeast | A01 House Ale | Beer Yeast | Double Pitch | 200 Billion Cells
The best of both worlds, House is clean and allows malt and hops to shine. This strain is extremely versatile and flocculent enough to drop out of the beer quickly. Best strain choice for any and all English- inspired recipes, however, does extremely well in hopped up American styles too. House is clean at cold temperatures with increased esters as fermentation temperatures rise. Attenuation: 73-75% Flocculation: High Alcohol Tolerance: 10% ABV Optimum Fermentation Temp: 62-70°F Cell Count: 200 Billion Similar Strains: WLP007, WY1098 Please Note: For best results we Always recommend ordering an Ice Pack with your liquid yeast. Ice Packs can be found below in the "You might Also Need" section. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$12.99
-
Propane Tank Y Splitter
Use this splitter to run two propane burners from one propane tank. In most applications two burners is the max you can simultaneously run from one tank before you start to freeze up the vavle on the propane tank. Works well with BrewBuilt™ AfterBurners, Camp Chef burners, and other brewing related burners.
$29.99
-
Beerstix Domininos - French Medium +
Think Stave Segments, evolved. The BeerStix Domininos are 1 1/2" square segments of oak, milled to give you quick extraction, and full flavor. While similar to conventional stave segments, you will see similar results in a much shorter timeframe, making these much more suitable for beer. This is a 490 g (1 lb) bag of French Oak Domininos, Toasted Medium Plus and sized to oak 100 gallons of Beer. This is the quickest turnaround on a Beer Stix product. At one month extraction, you'll see a quick integration of rich oak character due to the high surface area of these domininos in contact with your beer. Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Domininos will provide a round and rich oak character specific to the toast level and origin. French Oak toasted to a Medium + with the beerstix milling will give your beer toasted roasty aromas reminiscent of coffee, along with some caramel, and a subtle sweetness that gets the whole palate. Different beer styles will accentuate or mask different flavors from the oak, so expect some variation! Features: Oak Origin - France, Allier Region Toast Level - Medium Plus Oak Form - Domininos, 490 gram Volume Treated - 100 Gal Beer Extraction Time - 1 Month (see note below) Flavors & Aromas - Coffee, Roasted Toasty aromas, Caramel, Slight Sweetness Please Note - Allow 1 month minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.
$59.99
-
BeerStix Barrel Tether - American Med +
Beerstix 8 piece Barrel Tethers are a great new means of imparting high quality Oak flavor to your beer. These tethers are designed to fit through the bung hole of a barrel, and sized to treat 59 gallons of beer (for smaller volumes, or less oak impact, simply cut off sections as necessary). Thanks to careful selection of oak, followed by precise aging and seasoning, and exact toasting, these Tethers will provide a round and rich oak character specific to the toast level and origin. American Oak toasted to a Medium + with the beerstix milling will give you flavors and aromas of roasted coffee, light chocolate and honey, as well as some spice notes and hints of leather. Every beer will accentuate, or mask different flavors from the oak, so expect some variation between beers! The Beerstix miling gives 60% more surface area compared to the Winestix, speeding up the extraction process, and getting you a beer that has a rich oak character, in less time. The Beer Stix are also milled thinner than the WineStix, allowing for denser toasting. Features: Oak Origin - North American New York Alba Toast Level - Medium Plus Oak Form - Barrel Tether (8 Piece) Volume Treated - 59 Gal Beer Extraction Time - 2 Months (see note below) Flavors & Aromas - Roast Coffee, Light Chocolate, Spice, Honey, Nutmeg, Leather Hints. Please Note - Allow 2 months minimum extraction time to balance the extraction of short and long grain from the Stix. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the BeerStix® milling.
$84.99
-
Monster Mill - Base Only
A solid base designed for the Monster Mills. Mounts your Monster Mill securely to simplify your brew day. Measures just under 12"x 12". Please Note: This is just the Fiber Board Base Only for Monster Mills. For a complete setup as shown in the picture, see our3 Roller Monster Mill Packages.
$19.99
-
Total Alkalinity Indicator (15 ml) - LaMotte Water Test Reagent
Replacement Total Alkalinity Indicator test reagent (15 ml) with a 6 month shelf life Does not include complete BrewLab test kit. See BrewLab Basic® test kit or BrewLab Plus test kit for additional information.
$9.30
-
Blichmann RIMS Rocket (120V)
Using an electric Recirculation Infusion Mash System heater to heat your mash is one of the safest and most energy-efficient ways to get your brew to the perfect temperature, and the Blichmann RIMS-Rocket is one of the most popular models on the market today. This innovative heater is designed especially for use with the popular Blichmann HopRocket™ canister, and to install it all you have to do is secure it inside of the canister, plug it in, and monitor the temperature. The RIMS-Rocket operates with 2000 W, 120V and ultra low watt density in order to perform optimally in your RIMS system. It features a "plug and play" 12-foot long factory wired cable with a molded twist-lock L6-30P plug on one end and a removable plug on the other end, making it easy to clean because there are no dangling cords attached to the side of your heater. Best of all, the ultra low watt density ensures that you’ll never scorch your mash during the heating process! Features: The RIMS-Rockettm heating element is 2000 W, 120V, ultra low watt density and is engineered to perform optimally in your RIMS system Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your heater and the terminal pins are spray-down capable! The RIMS-Rockettm heater assembly clamps right into our HopRockettm canister for added versatility and lower cost. The RIMS-Rockettm includes a "plug and play" 12ft factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end. Less than Ultra low watt density means NO chance of scorching, and dry-fire capable (although we certainly don't recommend this!) Please note: mounting bracket sold separately.
$236.49
-
BrewBuilt® AfterBurner™ | Connecting Kit
Easily connect multiple BrewBuilt AfterBurners together to create your very own brewing stand. Predrilled holes on every BrewBuilt Burner allow for easily assembly. Includes stainless straps for backside connection along wtih a laser cut plate for the front of the stand. Front plate also includes predrilled holes for mounting a pump bracket. 8 bolt assemblies are included for a rocksolid connection. This beefy mounting plate is made in the US out of thick, 12 gauge 304 Stainless Steel.
$79.99
-
BrewBuilt® AfterBurner™ | Handle Option
This SS handle option is a great upgrade to get your AfterBurner moving! Combine this with the Caster Package and your AfterBurner will be an easily cartable brewery. This handle is designed specifically for the Modular AfterBurner Packages, and has drilled holes for easy attaching. Comes with Stainless Steel Handle and Bolt connection packages. Please note that this handle is designed specifically for the BrewBuilt AfterBurner.
$29.99
-
BrewBuilt® AfterBurner™ | Rolling Casters
Add these super-duty casters directly to your BrewBuilt AfterBurner and save your back. Your BrewBuilt Burner comes with pre-drilled holes making installation super easy. Includes two casters, two stainless steel mounting brackets, and four bolt packages. When also used with the optional BrewBuilt Handle you will be able to easily wheel your burner into place.
$34.99
-
Ss Weldless Pressure Relief Valve - Wider 2015 Model
A Pressure Relief Valve upgrade or replacement for the Chronical line of fermenters from Ss BrewTech. Features: Standard replacement part for Half Barrel Can be retrofitted to 7 Gal Chronical lid Releases pressure between 2-2.5 psi Food grade silicone O-ring Use Dewalt DWA1783IR step bit for retrofit For 7/32" inch hole diameter (in lid)
$10.95
-
Gasket | Half BBL Chronical Lid
A replacement gasket for the lids of Half Barrel Chronicals. Features: Brewer's Grade Silicone Replacement part for Brew Buckets and Chronical Series Fermenters
$17.95
-
Gasket | 14 Gal Chronical Lid
A replacement gasket for the lids of 14 Gallon Chronicals.
$16.95
-
Chronical - Replacement O-rings
Replacement O-rings for the Chronical Racking Arm bought after September 2014.
$1.95
-
Chronical - Adjustable 3/8" threaded "feet" inserts (for legs, set of 4)
Adjustable feet for Ss Brewtech chronicals. 3/8" threaded and comes in a set of 4. Does not work with standard 7 gal Chronical.
$10.00
-
Chronical 14 Gal FTSs - Fermentation Temperature Stabilization System
Chill your beer in the summer and warm your beer in the winter! Use a chill water source when it's hot or warmed water if it's cold! Temperature control during fermentation is one of the most significant contributors to the flavor of our beers, yet it all too often gets overlooked. This particular unit is designed to work specifically with the 14 Gallon Chronical Fermentor. Brewers typically have limited the styles of beers they produce to the varying temperatures of the seasons. The system is elegant and engineered, yet it stays true to the heart and soul of us home brewers. The FTSs uses a precision digital temperature controller in combination with a 304 stainless steel immersion chiller. The digital controller constantly monitors your beer’s temperature and will activate the circulation pump (which, by the way, is quieter than a mouse) to hold the fermentation temperature at your predetermined set point. You can crash cool or lager too! You supply the chill water source, which can be as simple as ice water in a cooler or as involved as glycol from a chiller’s reservoir. We supply the rest of the system. As long time fellow home brewers, this is a system we know many of you have been dreaming about for a long time: advanced temperature control for the beers you make at an affordable price. Features: Custom lid w/ 304 Ss immersion chiller coil Pro grade (super quiet) submersible pump 110-240V power supply 304 Ss weldless lid mounted thermowell Tailored neoprene insulation jacket Digital temperature controller
$289.95
-
Neoprene Jacket for Ss Brewtech Chronical Fermenter (10 Clamp) - 1/2 bbl
Give your Chronical insulation to help with maintaining fermentation temp and assist with cold crashing. Specifically sized for the 10-clamp version of the 1/2 bbl unit.
$35.00
-
FTSs | Half bbl Chronical | Lid Only
Replacement pre-drilled FTSs lid. Included with the the Ss BrewTech FTSs chilling system for the 1/2 bbl Chronical. Lid only. This does not include the other FTSs components.
$77.99
-
FTSs Lid for Ss Brewtech Chronical & Brew Bucket - 7 gal.
Replacement FTSs lid with pre-drilled holes. Fits the 7-gallon Ss Brewtech Chronical and Brew Bucket.
$41.95
-
Blichmann Engineering Power Adapter - 14-50P
Power Adapter from Blichmann Engineering. The adapter allows the 240V BoilBoil cable with L6-30P plug to be used with a 14-50P outlet. 14-50P outlets are commonly used for charging electric vehicles, RVs and electric ranges. 1.25 ft in length.
$69.99
You have seen 2400 out of 2755 products