Beer Making

Unitank Light offers the same tank body as the standard Brewtools Unitank with a slight difference in included accessories for a more affordable price Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Unitank Light is the same tank body as the standard Brewtools Unitank, but with slightly less equipment and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Unitank Light can be upgraded to a standard Unitank where you prefer. Key Differences: CleanCore butterfly valves made from Polyketone Barbed blow-off PRV Can be set to open during fermentation for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Polyketone racking arm replaces stainless steel racking arm Does not include neoprene insulation jacket, ss blow-off tube or ss blow-off valve Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 43.3" Max height w/o acc.: 51.2" Packaging size: 44.5" (h) x 20.5" (w) x 20.5" (d)  Net weight: 88 lbs Gross weight: 101 lbs Tank diameter (inside): Ø15.75" Gross volume: 22.7 gal Max rec. volume: 21.1 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs CleanCore Butterfly-valve, 2" 1 pcs Racking arm 2", POK 1 pcs TC elbow 90°, 2" 1 pcs Sample valve, 34mm, POK 1 pcs TC Adapter 8"-3", POK 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 4 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 9 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm pull-type PRV/Safety valve with 7mm barb 1.5m (4.9') Silicone tube 6x10mm Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

Unitank Light offers the same tank body as the standard Brewtools Unitank with a slight difference in included accessories for a more affordable price Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Unitank Light is the same tank body as the standard Brewtools Unitank, but with slightly less equipment and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Unitank Light can be upgraded to a standard Unitank where you prefer. Key Differences: CleanCore butterfly valves made from Polyketone Barbed blow-off PRV Can be set to open during fermentation for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Polyketone racking arm replaces stainless steel racking arm Does not include neoprene insulation jacket, ss blow-off tube or ss blow-off valve Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d)  Net weight: 73 lbs Gross weight: 88 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI Min. pH: 4.0 In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs CleanCore Butterfly-valve, 2" 1 pcs Racking arm 2", POK 1 pcs TC elbow 90°, 2" 1 pcs Sample valve, 34mm, POK 1 pcs TC Adapter 8"-3", POK 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 4 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 9 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm pull-type PRV/Safety valve with 7mm barb 1.5m (4.9') Silicone tube 6x10mm Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   The Glycol Chiller Adapter works in a similar way to the GF30 Conical Fermenter but instead of the built-in cooling sleeve and heating element, it uses a stainless steel cooling coil and a heating pad to control the temperature of almost any fermenter. The cooling coil is connected to the Glycol Chiller and immersed in the fermenter. The heating pad is attached to the side of the fermenter using hook and loop tape. A temperature probe is also attached to the fermenter and the GCA will then regulate the cooling, or heating, as required. The GCA connects to the Grainfather App so you can control your fermentation temperature on the go. Included in the GCA Kit: GCA Controller Heating Pad (12V 30W) 5m Cooling Coil Hose Rubber Bung Velcro Hook Strip x 4 Hose Clamps x 2 Rubber Bung Stoppers x 4

Read more less

Derived from T-90 Simcoe® pellet hops to perfectly replicate the aroma profile while omitting undesirable compounds found in hop vegetal matter Flavor/Aroma: Tropical, Dank, Pine The perfect hop: Using 100% hop-derived terpenes, Abstrax builds exact profiles to match the flavor and aroma of an exemplary lot of Simcoe® hops Consistent results every time. Eliminates the variance of using hops that may differ by age, crop year, storage conditions, growing region, processing method or farm Replace pellet hops: 5mL is equal to roughly 5.5 oz of pellet hops, while 1 oz of Quantum is equal to 2 lbs of pellet hops Simcoe® Quantum Brite One of the first truly tropical-forward varieties, Simcoe® defines the balanced catty/blackcurrant and tropical fruit notes so sought after in early West Coast IPAs on through today’s Hazys and Milkshake IPAs. Optimized Hop Extracts Compared to other hop-extracts, the Quantum Series tastes better, performs better, and is easier to use. It works with everything from Pils to Porters with no special handling required. Easily flowable at cool, ambient, and warm temperatures. Gone are the days of warming up your extract or scrubbing the sticky gunk out of your equipment. Compared to hops and pellets, the Quantum Series offers a 100% utilization rate and can be used at any stage of the brewing process. It cuts down on shipping and storage costs by an order of magnitude, not to mention the labor savings from not having to lug boxes around. Quantum Tastes Better The Quantum Series is an evolutionary leap forward in aroma and brewing technology. When you get down to it, nobody wants to use an extract product that makes their beer taste worse off. Extracts have taken a bad rap because they can often add more problems than they solve and, frankly, they don’t always taste the greatest. Abstrax gets it. That’s why, above all else, flavor and aroma come first with Quantum. Dosage Consider 1mL of Quantum Brite the flavor/aroma equivalent of 1 oz of T-90 pellet hops. Add after fermentation is complete, ideally at the coldest and latest point in your process, in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass. Features: 100% efficient flavor/aroma transfer Consistent from batch to batch No yield loss from absorption Quantum will not affect IBU test results and cannot cause lightstruck off-flavors Zero Undesirable Plant Compounds No Lipids No Chlorophyll Recommended storage: 40-90°F. Do not freeze. Simcoe® is a registered trademark owned by Yakima Chief Hops, LLC.

Read more less

Derived from T-90 Citra® pellet hops to perfectly replicate the aroma profile while omitting undesirable compounds found in hop vegetal matter Flavor/Aroma: Citrus, Woody, Tropical The perfect hop: Using 100% hop-derived terpenes, Abstrax builds exact profiles to match the flavor and aroma of an exemplary lot of Citra® hops Consistent results every time. Eliminates the variance of using hops that may differ by age, crop year, storage conditions, growing region, processing method or farm Replace pellet hops: 5mL is equal to roughly 5.5 oz of pellet hops, while 1 oz of Quantum is equal to 2 lbs of pellet hops Citra® Quantum Brite There is no more successful hop in the modern history of beer than Citra®. Bred to bring balanced, spicy woodiness and citrus notes together with a high alpha backbone to create an instant classic. Optimized Hop Extracts Compared to other hop-extracts, the Quantum Series tastes better, performs better, and is easier to use. It works with everything from Pils to Porters with no special handling required. Easily flowable at cool, ambient, and warm temperatures. Gone are the days of warming up your extract or scrubbing the sticky gunk out of your equipment. Compared to hops and pellets, the Quantum Series offers a 100% utilization rate and can be used at any stage of the brewing process. It cuts down on shipping and storage costs by an order of magnitude, not to mention the labor savings from not having to lug boxes around. Quantum Tastes Better The Quantum Series is an evolutionary leap forward in aroma and brewing technology. When you get down to it, nobody wants to use an extract product that makes their beer taste worse off. Extracts have taken a bad rap because they can often add more problems than they solve and, frankly, they don’t always taste the greatest. Abstrax gets it. That’s why, above all else, flavor and aroma come first with Quantum. Dosage Consider 1mL of Quantum Brite the flavor/aroma equivalent of 1 oz of T-90 pellet hops. Add after fermentation is complete, ideally at the coldest and latest point in your process, in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass. Features: 100% efficient flavor/aroma transfer Consistent from batch to batch No yield loss from absorption Quantum will not affect IBU test results and cannot cause lightstruck off-flavors Zero Undesirable Plant Compounds No Lipids No Chlorophyll Recommended storage: 40-90°F. Do not freeze. Citra® is a registered trademark owned by Yakima Chief Hops, LLC.

Read more less

Connect EVABarrier tubing to 1/4" female threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. This fitting is also a replacement part for the NukaTap Counter Pressure Filler that allows you to connect Ball Lock Caps (FE133 / FE146) to the body of the filler. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL08730

Read more less

Replacement seal pad for the MB Varaible Speed Brewery Pumps (PMP650 / PMP655).

Read more less

Replacement seal for MB Variable Speed Brewery Pumps PMP650 and PMP655.

Read more less

Dump out the ice slurry from your jockey box without dumping out your draft coils Designed to pair with KegLand's Square Draft Coils Use the bracket holes as a guide for where to drill your shank holes These specially designed shank brackets from KegLand are a great accessory to pair with the Square Draft Coils for your custom jockey box build. The retention brackets will secure the coils in place so they don't come spilling out when you empty the ice slurry from your jockey box after use. Use the brackets as a guide to mark where to install your draft shanks, then mount them above the square coils and secure in place with the shank hex nuts.  KegLand Part Number: KL40440

Read more less

Replacement stopper bumber for The Ultimate Sparge Arm.

Read more less

Fermentis SafAle™ W-68 is the iconic Weihenstephan weizen strain and ideal for brewing German-style wheat beers, including Hefeweizen, Kristallweizen, Dunkelweizen, Weizenbock, and more. Suitable for a variety of wheat beers and other styles with fruity-spicy profiles, Fermentis SafAle™ W-68 produces aromatic beers rich in phenols (notes of clove and pepper) and esters (floral and fruity banana flavors). Known for medium sedimentation, this strain forms no clumps and will appear as a powdery haze when resuspended in beer. Attenuation: 78-84% Sedimentation Time: Medium Alcohol Tolerance: 9-11% ABV Optimum Fermentation Temp: 64-78°F

Read more less

These coils offer a sturdy, compact solution for custom jockey box builds The square-shaped coils hug the cooler walls, maximizing internal space for additional beverages Pair with the optional retention brackets to secure the coils in place, even when dumping out ice slurry after use Equipped with 8mm Duotight Adapters for easy connection to EVABarrier tubing The square shaped draft coils offer a unique and useful coil option for those building their own jockey box. These coils will hug the sides of your cooler walls and can be secured in place with optional retention brackets, allowing you to easily dump out your ice slurry after use without the internals of the jockey box spilling out. The square shape also leaves plenty of space within your cooler to pack extra canned and bottled beverages in the ice. Includes 8mm Duotight Adapters on the coil ends for use with 8mm OD EVABarrier tubing. Or the adapters can be removed so you can use the coil with your preferred 1/4" or 5/16" ID tubing. If you're looking for a pre-assembled option, these coils are featured in the KegLand 4-Tap Jockey Box. Specs: 2 Draft Lines Line Length: 45.9 ft. (14m) Coil Dimensions: 11" L x 9" W x 9.5" H KegLand Part Number: KL40087

Read more less

Serve ice cold beverages from four independent kegs Customize with your preferred faucets and beer shank adapters to suit your specific needs Uniquely designed square draft coils and shank brackets keep the jockey box internals in place so you can easily dump your ice slurry after use The KegLand stainless steel jockey box includes all of the internals needed to serve four beverages on tap. The square shaped draft coils hug the sides of the cooler walls and are secured in place with specially designed shank brackets, allowing you to easily dump out your ice slurry after use without the internals of the jockey box spilling out. Faucets and tailpieces are not included so you can customize the box to your preferred setup. Recommended Accessories: NukaTap Flow Control Faucet (D15841) Duotight Adapter - 8mm x Female Beer Thread (DUO104) EVABarrier Draft Tubing - 8mm OD x 4mm ID (D1717) For Commercial Kegs: KOMOS D-Style Keg Coupler w/ Duotight Adapters (D1526) For Ball Lock Kegs: 8mm Duotight Ball Lock QDs - Gas In & Bev Out (DUO150 / DUO151) You will also need a CO2 cylinder and regulator, as well as a gas manifold or tee fittings to split your gas line to your four kegs. External Dimensions: 22.2" Wide (including handles) 15.9" Deep (including latch system) 16.1" High Internal Dimensions: 18.8" Wide 11" Deep 13.7" High (there is a slight 3/4" recess at the top to fit larger kegs/bottles)

Read more less

The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar. Features double-pane swinging glass doors with lock & key, recessed drip tray with pre-plumbed drain, adjustable height wire rack shelves, interior lighting, rubber floor mat, easy to use digital thermostat, and heavy duty rolling casters. Please note the kegerator does not come with a plug for the tower holes. The Olympus is intended to be paired with standard 3" diameter draft towers or the KOMOS Quad Tap Tower kits. Feature Summary: Easy to use digital temperature controller Commercial grade compressor uses R290 refrigerant Tower cooling fan Beautiful stainless steel countertop style surface All stainless steel interior with rubber floor mat Recessed countertop style drip tray with built-in drain Adjustable-height Rubber-coated stainless steel bottle racks Heavy duty rolling casters come standard Front and side facing ventilation for maximum cooling efficiency Lock & key to keep your precious beverages protected Interior lighting can be switched On/Off from the outside ETL Certified CO2 Regulator, tower, draft lines not included Specifications: 90.875" Wide 27.75" Deep 36.75" Tall (fridge only) 40" Tall with Caster Wheels +15.75" with 4-Tap Tower +12.75" with 1 to 3-Tap Tower 115V - 60 hz 2.88 Amp draw Internal Dimensions: 78" Wide 21.75" Deep 29.25" Tall Door Frames - 28.75" H x 21" W What Fits: 5 Gal. Slimline Torpedo Keg - 20 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 20 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 5 15.5 Gal. Half Barrel Keg (Full Size Keg) - 5   Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.

Read more less

The KOMOS Olympus Kegerator was engineered with commercial use in mind, and easily stands up to the rigorous demands of a professional environment. That being said, this absolutely gorgeous kegerator will only enhance whatever room it finds itself in, whether that's the local taproom or your home bar. Features double-pane swinging glass doors with lock & key, recessed drip tray with pre-plumbed drain, adjustable height wire rack shelves, interior lighting, rubber floor mat, easy to use digital thermostat, and heavy duty rolling casters. Please note the kegerator does not come with a plug for the tower hole. The Olympus is intended to be paired with a standard 3" diameter draft tower or one of the KOMOS Quad Tap Tower kits. Feature Summary: Easy to use digital temperature controller Commercial grade compressor uses R290 refrigerant Tower cooling fan Beautiful stainless steel countertop style surface All stainless steel interior with rubber floor mat Recessed countertop style drip tray with built-in drain Adjustable-height Rubber-coated stainless steel bottle racks Heavy duty rolling casters come standard Front and side facing ventilation for maximum cooling efficiency Lock & key to keep your precious beverages protected Interior lighting can be switched On/Off from the outside ETL Certified CO2 Regulator, tower, draft lines not included Specifications: 58.875" Wide 27.75" Deep 36.75" Tall (fridge only) 40" Tall with Caster Wheels +15.75" with 4-Tap Tower +12.75" with 1 to 3-Tap Tower 115V - 60 hz 2.88 Amp draw Internal Dimensions: 46.5" Wide 21.75" Deep 29.25" Tall Door Frames - 28.75" H x 21" W What Fits: 5 Gal. Slimline Torpedo Keg - 12 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 12 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 3   Please note: The optimal conditions for this unit are an indoor environment with temperatures not exceeding 86°F and 55% relative humidity. If used outdoors or in an environment exceeding these conditions, note that the unit will operate for longer durations, and defrost cycles will vary based on temperature and humidity levels.

Read more less

Replacement neoprene jacket for the X3 Uni Conical fermenter. Not compatible with X2 or X1 Uni Conicals.

Read more less

The X3 Jacketed Conical and IceMaster Max 4 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 4 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling With room to connect up to 4 conicals, this package is perfect for brewers planning to expand their fermentation capacity over time Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 4? This powerful glycol chiller has more than enough cooling capacity for your chosen X3 Conical with room to add an additional three fermenters down the road. X3 Jacketed Uni Conical & IceMaster Max 4 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 4 makes for the perfect tag team partner, providing all the cooling capacity you'll need for up to four fermenters. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.

Read more less

This is the go-to strain for New England-style IPAs. It produces a medium ester profile similar to WLP008 East Coast Ale Yeast. It leaves some residual sweetness, helping accentuate both malt and hop flavors and aromas, while retaining a velvety mouthfeel. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Attenuation: 75-82% Flocculation: Low to Medium Alcohol Tolerance: 5-10% ABV Optimum Fermentation Temp: 64-72°F Cell Count: 150 Billion

Read more less

Oxygen-Free Dry Hopping: Designed to allow dry hopping without exposing the batch to oxygen. Customizable with Accessories: Features undrilled ports for optional accessories such as the Temp Twister Cooling Coil and Thermowell, enhancing functionality and convenience. Improved WiFi Reading: The plastic lid improves KegLand RAPT Pill WiFi reading, ensuring better connectivity. Compatible with all Kegmenter Fermentation Kegs with 4" Tri-Clamp ferrule. The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. This kit includes the 4" T.C. Pressure Lid to fit the tri-clamp ferule on Kegmenter Fermentation Kegs. The plastic lid also allows for improved KegLand RAPT Pill WiFi reading compared to the Kegmenter fully encasing the Pill in stainless steel. Due to the large 4" tri-clamp diameter, it is difficult to get higher pressures without leaking. Therefore we suggest using this up to 21 psi. The included Yellow PRV for the Pressure Lid is rated to 17 psi. The 3 Pieces of the Hop Bong Pressure Pack: Pressure Kit ​The Pressure Kit includes two Ball Lock Caps for Gas & Liquid. The Liquid cap can be paired with the optional Floating Dip Tube and Filter Attachment. These pieces allow you to pressure transfer finished beer out of the fermenter into kegs or a bottling bucket, or you can carbonate and serve beer directly from the Kegmenter. Tri-Clamp Pressure Lid Replacing the standard lid with the Tri-Clamp Pressure Lid provides you with a 2" T.C. port at the top of your fermenter. This will give you an opening to add dry hops or other additions without needing to remove the entire lid. Take off the butterfly valve to add your yeast pitch, and when you're ready to add flavoring additions when fermentation is complete, drop them in oxygen-free via the Hop Bong. PCO1881 threaded ports are there for your Ball Lock Caps, as well as undrilled ports for an optional Thermowell and/or Temp Twister cooling coil. Hop Bong  Load up the Hop Bong and add CO2 to purge your hop charge of oxygen. This kit comes with a third Ball Lock Cap to introduce CO2 directly to the Hop Bong, as well as a pull ring PRV to release pressure and purge oxygen. Once you've flushed your hop charge with CO2, open the butterfly valve to inject your beer with up to 6 oz of hop pellets. Hop Pellet Capacity: 150–180g (5.2–6.3 oz) Kit Includes: Kegmenter 4" T.C. Pressure Lid 2" Hop Bong 2" Butterfly Valve Red PRV & PCO1881 Cap Combo Yellow PRV Yellow Ball Lock Cap (2) Red Ball Lock Caps (3) 2" Tri-Clamps (3) 2" Silicone T.C. Gaskets Optional Accessories: Floating Dip Tube (FE115A) Filter Attachment (KEG657) Available Kegmenters: 7.6 Gallon (FE582) 13.2 Gallon (FE584) 15.3 Gallon (FE581) 1 bbl (FE585) KegLand Part Number: KB23665 Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.

Read more less

The X3 Jacketed Conical and IceMaster Max 2 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 2 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 2? This low-profile glycol chiller provides all the cooling capacity you'll need and is so compact that it only takes up about 12" of extra space next to your conical. X3 Jacketed Uni Conical & IceMaster Max 2 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 2 makes for the perfect tag team partner, providing all the cooling capacity you'll need for small-volume batches. And with two built-in submersible pumps with independent controllers, you can always add a sidekick fermenter and control both batches simultaneously. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.

Read more less

The X3 Jacketed Conical and IceMaster Max 2 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 2 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points High-quality, stainless steel table with rolling casters saves space in your brewery and can be easily moved whenever needed The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 2? This low-profile glycol chiller provides all the cooling capacity you'll need and is compact enough to ride shotgun on the included stainless steel work table. X3 Jacketed Uni Conical & IceMaster Max 2 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 2 makes for the perfect tag team partner, providing all the cooling capacity you'll need for small-volume batches. And with two built-in submersible pumps with independent controllers, you can always add a sidekick fermenter and control both batches simultaneously. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet. Stainless Steel Work Table The heavy-duty stainless steel work table is the final piece that makes this the Ultimate Chilling Package. Saddle up the X3 Conical and IceMaster Chiller to reduce the footprint of your brewery. And with the swivel rolling casters installed, you'll have easy mobility to move your setup if ever needed.  Please Note: Avoid moving the table while the Conical is resting on top or in use. This can lead to injury or damage to the conical and surrounding area. The table cannot accommodate the 25 or 38 gal X3 conicals.

Read more less

Make that Dank IPA LOUD with a hit of cannabis terpene extracts Abstrax®, the most reputable terpene brand in the cannabis industry, is now granting brewers access to the amazing aromas found in your favorite strain The Chronic - Replicates the terpene profile found in Blackberry Kush cannabis Blackberry and Afghani Kush come together to provide bursting Berry and Dank aromas Feeling Good! Terpenes function as mood enhancers; this Blackberry Kush will have you feeling Relaxed and Peaceful 420 Friendly - Contains no THC and no CBD. Legal worldwide Blackberry Kush Cannabis nostalgia harmonizes with all the glory of hops in gassy Blackberry Kush. Dark berries combine with notes of spice and earth to create an exquisitely dank detour on the ultimate flavor reunion tour. BrewGas Series A collection of the world’s gassiest and skunkiest cannabis profiles. If you’re a cutting-edge brewer looking to impart the authentic flavor and aroma of cannabis into your next beer, then look no further. BrewGas is water-soluble, uses only natural ingredients, and it’s TTB-approved. It’s flowable, doesn’t stick to the tank, and contains no THC so it’s legal everywhere. True-to-Type Botanically Derived Cannabis Profiles Cannabis and hops are members of the same genetic family but they’ve been historically kept apart by prohibition. With cannabis making its way into the mainstream, Abstrax is able to bring novel ingredients like terpenes to the brewer for the first time. We're here to reunite the family. Dosage Add 2.5 mL per 5-gallon batch for a moderate dank impact. Adjust to taste. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass. Features: Scalable TTB Aproved Legal Worldwide No THC / No CBD Water Soluble Powered by Terpenes Repeatable Recommended storage: 40-90°F. Do not freeze. Disclaimer: This product is not intended to be inhaled, vaped, smoked, combusted, or anything similar. This is a food and beverage product. Seriously. Don’t vape these. You’ll have a bad time.

Read more less

Make that Dank IPA LOUD with a hit of cannabis terpene extracts Abstrax®, the most reputable terpene brand in the cannabis industry, is now granting brewers access to the amazing aromas found in your favorite strain The Chronic - Replicates the terpene profile found in Pineapple Express cannabis  Hawaiian and Trainwreck come together to provide bursting Dank, Tropical and Earthy aromas Feeling Good! Terpenes function as mood enhancers; this Pineapple Express will have you feeling Energized and Peaceful 420 Friendly - Contains no THC and no CBD. Legal worldwide Pineapple Express Pineapple Express is the tropical stop on the Cannabis and Hops World Tour. Dank pineapple notes blend with gas for a lush flavor that’s the perfect combo of pine and citrus with hints of light spice and earth. BrewGas Series A collection of the world’s gassiest and skunkiest cannabis profiles. If you’re a cutting-edge brewer looking to impart the authentic flavor and aroma of cannabis into your next beer, then look no further. BrewGas is water-soluble, uses only natural ingredients, and it’s TTB-approved. It’s flowable, doesn’t stick to the tank, and contains no THC so it’s legal everywhere. True-to-Type Botanically Derived Cannabis Profiles Cannabis and hops are members of the same genetic family but they’ve been historically kept apart by prohibition. With cannabis making its way into the mainstream, Abstrax is able to bring novel ingredients like terpenes to the brewer for the first time. We're here to reunite the family. Dosage Add 2.5 mL per 5-gallon batch for a moderate dank impact. Adjust to taste. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass. Features: Scalable TTB Aproved Legal Worldwide No THC / No CBD Water Soluble Powered by Terpenes Repeatable Recommended storage: 40-90°F. Do not freeze. Disclaimer: This product is not intended to be inhaled, vaped, smoked, combusted, or anything similar. This is a food and beverage product. Seriously. Don’t vape these. You’ll have a bad time.

Read more less

Make that Dank IPA LOUD with a hit of cannabis terpene extracts Abstrax®, the most reputable terpene brand in the cannabis industry, is now granting brewers access to the amazing aromas found in your favorite strain The Chronic - Replicates the terpene profile found in King Louie XIII cannabis  OG Kush and LA Confidential come together to provide bursting Citrus, Dank and Woody aromas Feeling Good! Terpenes function as mood enhancers; this King Louie XIII will have you feeling Relaxed and Peaceful 420 Friendly - Contains no THC and no CBD. Legal worldwide King Louie XIII As the gassiest, skunkiest performance of the canna-hops tour, the BrewGas headliner is none other than King Louie XIII It’s overwhelmingly dank with citric woody top notes and a blast of earthy base. When it reigns, we pour. BrewGas Series A collection of the world’s gassiest and skunkiest cannabis profiles. If you’re a cutting-edge brewer looking to impart the authentic flavor and aroma of cannabis into your next beer, then look no further. BrewGas is water-soluble, uses only natural ingredients, and it’s TTB-approved. It’s flowable, doesn’t stick to the tank, and contains no THC so it’s legal everywhere. True-to-Type Botanically Derived Cannabis Profiles Cannabis and hops are members of the same genetic family but they’ve been historically kept apart by prohibition. With cannabis making its way into the mainstream, Abstrax is able to bring novel ingredients like terpenes to the brewer for the first time. We're here to reunite the family. Dosage Add 2.5 mL per 5-gallon batch for a moderate dank impact. Adjust to taste. Add at any point on the cold side in your fermenter, keg, or bottling bucket. Or even add a drop or two to spike your finished beer in the glass. Features: Scalable TTB Aproved Legal Worldwide No THC / No CBD Water Soluble Powered by Terpenes Repeatable Recommended storage: 40-90°F. Do not freeze. Disclaimer: This product is not intended to be inhaled, vaped, smoked, combusted, or anything similar. This is a food and beverage product. Seriously. Don’t vape these. You’ll have a bad time.

Read more less