Beer Making

High quality transparent silicone tube. Recommended for Brewtools Brewing Systems. Use with 19mm barb x 34mm tri-clamp (BT1092). Food grade silicone Inside diameter: 16mm (0.62") Outside diameter: 25mm (0.98") Sold in 1.5m lengths (4.9')

Read more less

This collection container fits all the FermZilla Tri-Conicals with a 3" x 3" Butterfly Valve. No more threads or oil filter removal tools to get this off, simply depressurize and remove the tri-clamp fitting. We recommend placing a towel or upside down frisbee to catch some drips. The clear body is made from Tritan from Eastman Plastics which is heat tolerant and BPA- and plasticizer-free. The ports on the side are the same as a standard coke bottle or soft drink bottle (PCO1881). These are also the same on the top of the FermZilla lid and the previous model collection container. Owners of the FermZilla Tri-Conical that came with the 2" T.C. collection container can upgrade to this collection container by swapping their butterfly valve to the 3" x 3" Tri-Clamp Butterfly Valve. Recommended Accessories: 1 x Ball Lock Carbonation Cap (FE133 or FE146) 1 x Red PRV Cap Combo (KG524) Includes: 600mL Tritan Plastic Collection Container 3" Tri-Clamp Ferrule PCO1881 Carbonation Cap Ports 3" Tri-Clamp (3-Piece) 3" Tri-Clamp Silicone Gasket 3" Tri-Clamp Black Polyketone End Cap Dimensions: 6.7" Tall Tapers from 3" ferrule down to 2.5" diameter bottom KegLand Part Number: KL30366

Read more less

Replacement screen board for the BrewZilla's RAPT Controller. Suitable for Gen 4 / 35L units only.

Read more less

Due to high demand, the 2.5 and 5 gal are currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. A complete kegging system featuring KOMOS CO2 Regulator, KOMOS CO2 Cylinder, and stackable Slimline Torpedo Keg! Available in 1.5, 2.5 and 5 gallon sizes, we provide all the equipment you need to get your beer kegged up. Comes with EVABarrier tubing and Duotight ball lock QDs and fittings for easy assembly. Included: KOMOS Dual Gauge Regulator KOMOS 5 lb aluminum CO2 cylinder Slimline Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal) EVABarrier beer & gas lines Duotight ball lock quick disconnects (QDs) Duotight-compatible plastic picnic faucet KOMOS 7-in-1 Multi Tool Wrench Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.

Read more less

Due to high demand, the 1.5 ,2.5, and 5 gallon is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. A complete kegging system featuring KOMOS CO2 Regulator, KOMOS CO2 Cylinder, and stackable Torpedo Keg! Available in 1.5, 2.5 and 5 gallon sizes, we provide all the equipment you need to get your beer kegged up. Comes with EVABarrier tubing and Duotight ball lock QDs and fittings for easy assembly. Included: KOMOS Dual Gauge Regulator KOMOS 5 lb aluminum CO2 cylinder Standard Ball Lock Torpedo Keg (1.5, 2.5, or 5 gal) EVABarrier beer & gas lines Duotight ball lock quick disconnects (QDs) Duotight-compatible plastic picnic faucet KOMOS 7-in-1 Multi Tool Wrench Please note: the CO2 tank ships empty. It can be filled or swapped for a full tank at your local welding or homebrew supply store.

Read more less

This insulated tubing kit was developed specifically for the BrewBuilt Jacketed Conical. It has all the fittings needed to connect an IceMaster Glycol Chiller to the conical jacket's 1.5" tri-clamp inlet and outlet—plus premium quick disconnects with shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet. Insulated tubing will now only provide increased chilling efficiency, it will also eliminate line sweating so you don't need to wipe up puddles of condensation that might collect on your brewery's floor during fermentation or cold crashing. Kit Includes: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb 2 - High Temp Plastic Male QDs w/ 1/2" MPT 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters

Read more less

DIN 43650 Type A connector for solenoid valves. PG9 gland for cable Ø6-8mm IP65

Read more less

Power supply with DIN 43650-connector for solenoid valves. Made for use with solenoid valves directly from an AC outlet in an Inkbird or equivalent systems. Adapters for global use included. Specifications: Input: 100-240V AC, 50/60 hz Output: 24V DC, 1.66A (39.84W) Cord Length: 3m (9.8')  

Read more less

Solenoid valve made from stainless steel. Designed for glycol, water and air/co2. T.C. 34mm ports in both ends for maximum flexibility. Coil and plunger Italian-made by ACL. The valve can easily ble disassembled and cleaned. Coil has DIN 43650 Type A connector (not included). Normally used with T.C. 34mm to 3/8" NPT threaded adapter and leak-free quick connectors on one or both sides depending on setup. Specifications: Ports: TC34mm / TC34mm Operation: NC (normally closed) Power supply: DC24V, 10W Orifice: Ø4.5mm Pressure rating: Max 3 bar / 43 PSI

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

Leak-free quick connectors are well suited for glycol to cool fermenters. Fits perfectly in combination with 8.5mm x 14mm EVA tubes both insulated and non-insulated.

Read more less

Adapter for use with glycol quick connectors or other fittings with 3/8" NPT threads.

Read more less

TC34mm 90° elbow to 3/8" (10 mm) hose barb Fits 8.5x14mm EVA tubes for glycol For more information on building a cooling system for your Brewtools fermenter, click here.

Read more less

Standard hose clamp, AISI 316L

Read more less

Stainless steel ball valve with 12mm barbs.

Read more less

Stainless steel tee with two 12mm connections and one combined 10/12mm connection. Designed for our glycol tubing.

Read more less

Panel mounted fitting from TC34mm to 12mm barb with M28 threads and nut. Used with MiniChilly 17 for glycol loops.

Read more less

Adapter from G3/4" threads to 12mm hose barb. Mainly used with MiniChilly 17 for glycol loops. Gasket sold separately.

Read more less

Adapter from G3/4" threads to TC34mm Mainly used with MiniChilly 17 for glycol loops. Gasket sold separately.

Read more less

Replacement DPDT Power Relay for the Semi Automatic Cannular Pro. If the motor of your Cannular Pro is not turning off after running through a full rotation then you may need to replace the power relay. This relay distributes power to the motor when the operation button is pressed and also turns the motor off once the microswitch has been activated and hence the Cannular has run through a full seaming rotation. Specifications: Model: JQX-13F(D) 8-Pin Voltage & Current Ratings: 10A 250V AC 10A 24V DC KegLand Part Number: KL21524

Read more less

Replacement set of door hinges for the KOMOS Double-Wide kegerator. Not compatible with the Standard, Outdoor, or Olympus models.

Read more less

Replacement set of door hinges for the KOMOS standard and deluxe kegerator. Not compatible with the Double-Wide, Outdoor, or Olympus models.

Read more less