Beer Making

The Keg System Cap transforms any growler in the Craft Master lineup to a full fledged ball lock mini keg! This is hands down the must have accessory for any beer lover with our pressurized growler that owns a home bar or kegerator! Serve up to 1 gallon of your favorite local brew at home from your own kegerator or bar! Simply fill your Growler (up to 128oz) with your favorite beer, attach the keg system cap to your ball lock draft system and viola` – brewery fresh beer served on tap from home! Each cap includes ball lock posts for CO2 in and a “beverage out”, an integrated safety valve, a zipper tab to relieve any excess pressure, and PSI gauge! There’s even a dip tube (just like a real keg) to ensure you get every last drop from your growler! Made from the same high quality food grade components and bomb proof durability you’ve come to expect from our products, each cap is built to provide a lifetime of your favorite draft beers on tap, at home!  

Read more less

A ball lock cap is an ideal solution for home brewers and beverage enthusiasts using industry standard ball lock kegs and equipment. A great accessory to easily charge your pressurized growler from your own tank without the use of a food grade CO2 cartridge. These Ball Lock Caps Are Heavy Duty! The ball lock cap was engineered for a quality carbonating experience and built to last the rigors of the foodservice industry. Needless to say this ball lock growler cap will last a lifetime. Each cap comes with a fully integrated and easily adjustable PSI gauge, removable (and interchangeable) ball lock post (gas in), a safety valve that releases pressure automatically over 20 PSI, and a manual pressure release zipper tab so you can make your own adjustments! Made from 100% food safe materials, it is now easy and convenient to pressurize your favorite carbonated beverages from any CO2 tank at a moments notice!    

Read more less

Designed for use with the PCO38 Tapping Head. With female PCO1881 threads, it can also be used with the FermZilla Collection Container or Hop Bong Sight Glasses. The Red PRV is rated to 35 psi (2.5 BAR). Warning: Never exceed the pressure capabilities of your vessel. PRV's are not spunding valves!   KegLand Part Number: KB10537

Read more less

This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit.  Allowing for a 90° connection between the barb on the yellow liquid plastic carbonation cap and the 6.3 mm OD dip tube provided in the kit. KegLand Part Number: KL26260

Read more less

Replacement PCO38 tapping head. This is the tapping head only. For the full tapping head assembly see KG520. Comes with PCO38 female threads for attaching to the Oxebar Mono Keg and three PCCO1881 male threaded ports for attaching ball lock caps and PRV. KegLand Part Number: KL20169

Read more less

Replacement seals and poppet for the Duotight Flow Control Ball Lock QD. KegLand Part Number: KL27212

Read more less

Replacement locking caster wheel for the KOMOS Olympus kegerator. Set of 4. Mounting screws are included.  

Read more less

Replacement evaporator for the KOMOS Double-Wide Kegerator. Not compatible with standard or outdoor models.

Read more less

Direct replacement controller for Olympus series kegerators. Dixell Model: XR03CX LIFEBXB5S6 110V

Read more less

This solid black door for the right side of the Olympus II or middle and/or right side of the Olympus III kegerator can be installed if you want one of the interior sections of the fridge to be protected from sunlight. The solid doors provide better insulation compared to the glass doors, and will protect beer bottles and draft lines from UV exposure if the fridge is positioned in direct sunlight.

Read more less

This solid black door for the left side of the Olympus II or Olympus III kegerator can be installed if you want one of the interior sections of the fridge to be protected from sunlight. The solid doors provide better insulation compared to the glass doors, and will protect beer bottles and draft lines from UV exposure if the fridge is positioned in direct sunlight.  

Read more less

Replacement glass door for the right side of the Olympus II or middle and/or right side of the Olympus III kegerator. Please note: This glass door is a direct replacement part for the standard Olympus model which has been superseded by the Olympus Deluxe model. The door has a black trim rather than the stainless steel trim of the deluxe model.

Read more less

Replacement glass door for the left side of the Olympus II or Olympus III kegerator. Please note: This glass door is a direct replacement part for the standard Olympus model which has been superseded by the Olympus Deluxe model. The door has a black trim rather than the stainless steel trim of the deluxe model.

Read more less

For all you hop bongers out there. We have an end cap for all end caps! Compatible with multiple PCO1881 accessories. Made from high quality engineering plastic and will last a very long time. It's chemically resistant and also designed to resist impact and physical damage. The Hop Bong features a molded PCO1881 port, but depending on your application you might need a second. If using to dry hop, you'll use the Hop Bong port to add CO2 with a Ball Lock Cap and then attach the PRV Cap to the Hop Bong Cap to purge the gas. Use with the 2" Hop Bong to attach: Red PRV 1881 Cap Combo Red Ball Lock Cap Yellow Ball Lock Cap KegLand Part Number: KL23627

Read more less

For all you hop bongers out there. We have an end cap for all end caps! Compatible with multiple PCO1881 accessories. Made from high quality engineering plastic and will last a very long time. It's chemically resistant and also designed to resist impact and physical damage. The Hop Bong features a molded PCO1881 port, but depending on your application you might need a second. If using to dry hop, you'll use the Hop Bong port to add CO2 with a Ball Lock Cap and then attach the PRV Cap to the Hop Bong Cap to purge the gas. Use with the 1.5" Hop Bong to attach: Red PRV 1881 Cap Combo Red Ball Lock Cap Yellow Ball Lock Cap KegLand Part Number: KL23610

Read more less

Upgrade your FermZilla Conical or All Rounder with the new 2" Tri-Clamp Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed in order to suit a growing number of customers desire to dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you will be able to purge CO2 into the tube and expel all the oxygen inside it and dump freely into the vessel. Features: (2) PCO1881 Male Ports Recommended for use with Red (Gas In) & Yellow (Bev Out) Ball Lock Caps PRV Port with Red 35 psi (2.5 BAR) PRV 2" T.C. Ferrule Undrilled Ports (for optional accessories): Thermowell Port (see below for FermZilla Thermowell kit) (2) Temp Twister Ports Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank.  Also includes: 2" Tri-Clamp 2" T.C. Gasket 2" T.C. x PCO1881 Male Thread Cap If you ever need to replace the O-ring attached to the bottom of the Pressure Lid, a Corny Keg Lid O-ring fits perfectly. KegLand Part Number: KL28219 Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter. Warning: Only use Red 35 psi PRV with this lid. Ensure the PRV is cleaned and dried of sticky residue before each fermentation. Failure to do so could cause injury and void warranty.

Read more less

The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the FermZilla Tri-Conical and All Rounder fermenters with the new Tri-Clamp Adapted Pressure Lid. It can also be adapted to any 2" T.C. port in your system to use either inline or as a dry hopping device. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter, bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 150–180g (5.2–6.3 oz) KegLand Part Number: KL26079

Read more less

The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the BrewBuilt X-Series Uni Conical fermenters for their 1.5" T.C. lid port. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter (if your conical has a 1.5" bottom port, or if you use it along with a 2" x 1.5" reducer), bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 80–120g (2.8–4.2 oz) KegLand Part Number: KL26062

Read more less

Duotight 9.5 mm OD retaining clip. Locks Duotight fittings in their closed position, making it impossible for any hose to escape. Pack of 10. KegLand Part Number: KL21678

Read more less

Package 15 x 16oz cans per minute Hardened chuck for extreme durability and extended lifespan Small footprint – roughly the same size as a pallet space Easy to wash down and clean between uses Suitable for breweries up to 40bbl The Cannular brand launched the manual can seaming machine at the start of 2019 with the world's first bench-top canning machine that was affordable and accessible to home brewers worldwide.  It gave home brewers and craft brewers the ability to get into small scale canning while still maintaining very low DO, seam tightness and lock in beverage quality. Since then, the Cannular canning machines have become the world's most popular canning machines ever manufactured, selling worldwide in America, Europe, UK, New Zealand and Australia.  On the back of this success KegLand then has further built the Cannular brand name to deliver a Semi-Auto canning machine and now is delighted to bring out the Cannular Full Auto Single Lane Canning Line. In essence with the whole Cannular range it depends on fundamentally simple processes and when combined with modern engineering provides an elegantly simple solution to small scale packaging.  The Cannular Fully Auto Single Lane Packaging Line will suit a small to medium sized brewery doing batches from 10bbl and up to 40bbl. Compact Size The compact footprint means this canning line is almost the size of a standard pallet so it can be stowed into pallet racking or wheeled out of the way easily. Hardened Chuck The chucks on this machine are made from Cr12MoV which is then coated with Titanium.  This grade has superior hardness so it can last an extremely long time without needing to re-tune the machine or change the chuck.  The hardness is 58-62 dH.  If you are particularly concerned about corrosion of the chuck, KegLand can also custom make stainless steel chucks on request.  For stainless steel chucks they can use the Quench Polish Quench process to harden the stainless steel.  It should be noted that the stainless chuck is more expensive and is less hard than the Cr12MoV alloy and as a result we do not normally recommend this alternative but it can be manufactured if requested. Setup and Washdown As the machine is fairly compact the wash down is extremely simple. The whole operating deck can be washed down with a hose and the chassis is mounted with an oversized drip tray to catch stray drips from the filling process.  The deck can also be plumbed to drain so cleaning in place (CIP) can be implemented.  All wet areas are made from nylon, Teflon and 304 stainless steel. Maintenance Made with European pneumatics, electronic controllers, flow sensors and industrial grade PLC you can be confident that all components are built to last the distance and designed to handle millions of cans before requiring an overhaul. We recommend that tolerances are checked on the rolls and chuck every 100,000 cans and lubricate some of the pneumatics.  Fortunately, all spare parts are supplied by KegLand so you know you're not going to get the shaft on replacement parts in the unlikely instance that you need them.  No major overhauls will be required until well over 1 million cans have gone through this machine and even when that time comes the maintenance procedures are relatively straight forward. Significant CPM for the Footprint This canning line is able to package 15 cans per minute making this the highest output machine ever manufactured within this small footprint. Low Labor Cost As this machine is relatively simple to run, one operator can load cans and lids into the respective hoppers and also package cans from the output of the machine.  Larger more complicated machines often require several operators to run, making this labor efficient for such a small machine size. Specifications: 120V Supplied as standard with a B64 chuck that suits standard 202 can bodies Height and Width are easily adjustable for a variety of cans Min. Can Height: 3.93" (100mm) Max. Can Height: 7.28" (185mm) Dimensions: 38" x 28" x 69" Shipping Crate Dimensions: 42" x 33" x 76" Shipping Weight: 453 lbs KegLand Part Number: KL24457  

Read more less

If you are an experienced single vessel brewer and don't use the overflow pipe. This malt pipe screen is the perfect upgrade for just that! The Gen 4 BrewZilla nixed the overflow pipe, so this is a direct replacement part for that unit. But this screen can also be used with the Gen 3 BrewZilla if you don't use the overflow pipe. KegLand Part Number: KL14243

Read more less

Add this neoprene jacket to your Gen 4 BrewZilla to speed up heating! Heating is 10% faster and heat loss from the boiler is reduced by 50% Remove the jacket after the boil to speed up chilling Thick, insulating neoprene is secured to the boiler body with a sewn-on hook and loop fastener strap Sparge arm sleeve included to reduce heat loss during mash recirculation Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use KegLand Part Number: KL24372  

Read more less

This false bottom is specifically designed for the Gen 4 65L BrewZilla. On this model the ball valve tap was relocated underneath the unit, allowing for a super low profile false bottom that molds itself to the concave bottom of the BrewZilla. This also allowed for a larger malt pipe for bigger grain bills and provides a filter for protecting the easy access pump. It is not suitable for DigiBoils or Gen 3.1.1 or older BrewZillas, as those models do not have a concave bottom. Includes 2x Eye Bolt Assemblies. KegLand Part Number: KL27311  

Read more less

Specifically designed for maximum strength and rigidity. This redesigned top screen features a hole for the probe of the RAPT Bluetooth Thermometer for monitoring and controlling your BrewZilla Gen 4. KegLand Part Number: KL27373

Read more less