Beer Making

The KOMOS draft line kit includes lengths of EVABarrier draft tubing, the same tubing used in all KOMOS kegerators. Each kit includes beer line and gas line, and Duotight tee fittings to split your gas line (excluding single tap kit). See below for recommended Duotight fittings. EVABarrier tubing is a high-quality double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! The outer barrier gives the tubing a nice stiffness that makes it extremely kink resistant and perfect for use with push-in fittings. The inner wall is an excellent gas barrier, keeping oxygen out and CO2 in. The internal surface of the tubing is extremely smooth, making it difficult for bacteria and microbes to cling to. Kits Include: Beverage line Measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line Measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap kit includes uncut rolls of bev & gas line We recommend cutting bev lines to 5.5-6.5 ft. lengths Gas lines can be cut to whatever length best suits your needs Duotight tee fittings to split gas line (for 2-Tap and higher)  

Read more less

Replacement table spacer for the Cannular Pro Semi-Auto Can Seamer (CAN110). Suitable for 500mL, 330mL aluminum cans and tin cans. It is not compatible with the manual seamer model (CAN100).   KegLand Part Number: KL17879

Read more less

If you want to install the Temp Twister & Thermowell on your FermZilla's plastic lid, this step drill bit is the recommended tool for the job. Suitable for drilling holes in plastic, wood, stainless steel, and other metals. You can use this drill bit to install valves or bulkheads on a stainless kettle, bore out a hole for a draft shank, or drill out the pilot hole found on many KegLand drip trays. For best results when drilling through metal, make sure to drill slowly (less than 600 rpm). Apply significant pressure behind the drill as you cut through. Cutting lubricant is recommended. Note that fast drill speeds will cause the metal and the bit to heat up which can shorten the lifespan of the drill bit. Specs: Drill Speed: 200-800 RPM Can Drill Hole Sizes: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm Hole Size Range (Imperial): 0.15" – 0.78" Coating: Titanium Nitride Suitable for: Metal, wood, plastic Tip: Self starting tip (no pilot hole required or center punch) KegLand Part Number: KL09447  

Read more less

This Set of 12 Mini Liquid Chalk Markers utilize water-based pigment ink so you can mark on windows, glass, mirrors, plastic and metal surfaces with ease. The ink won’t wash off in the rain, yet is easy to remove with a damp cloth. For permanent application the markers can also be used on chalkboards for a bold statement. If using the Chalkboard Tap Handle, we recommend using these chalk pens on the back of the tap handle rather than the chalkboard insert. The chalkboard insert is porous and will let the ink set in, whereas the back of the tap handle is smooth and will wipe clean more easily. Each marker has a 1.5 mm bullet tip The markers are ideal for signage and can be used indoor and outdoor The ink is made using a water-based formula and each color is vibrant and opaque This marker contains white colored ink The ink is removable on non-porous surfaces KegLand Item Number: KL20206

Read more less

Replacement internal seal for Stainless Carbonation and Line Cleaning Ball Lock Quick Disconnects. Only the stainless steel ball lock caps require these seals (KG500 & KG502). They are not needed for the Red & Yellow plastic versions. Comes in pack of 5. KegLand Part Number: KL21272

Read more less

Replacement brass hex nut for standard beer shanks. KegLand Part Number: KL06286

Read more less

This custom slow-release fertilizer blend is great for first year hop plants. This is the exact formula used on The Hop Yard's large commercial hop fields. We’ve found this mixture to be strong enough to enhance growth, but not so harsh that it burns up the young shoots. Our custom blend is a mix of N, K, P, and dried kelp. The Small bag will provide sufficient fertilizer to cover 5 plants during their first season of growth. The Large bag is sufficient for 25 plants. Instructions for use are included on the bag.  

Read more less

The NukaTap Punisher Edition beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The Nuka Tap is compatible with all Intertap spout accessories. NOTE: The Punisher Edition faucet features a matte black body with stainless spout. Other models are pictured as example photos. For the all black NukaTap faucet, see the Stealth Bomber Edition. Faucet body & lever made from stainless steel Shuttle made from TPV O-rings made from EPDM Lever collar & friction bonnet made from brass Matte black finish / brushed stainless spout NSF approved Kegland Part Number: KL26482 Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Punisher Edition faucets for professional settings.

Read more less

Pairs perfectly with the MB 7 bbl Complete Electric Brewhouse. The 7" touch screen allows you to control and monitor your brew day with ease. Featuring individual element control, remote web access, and auto start function that can be fully programmed to start by time and day. This unit has an additional input for controlling a mash rake. For more information regarding setup, click here. Individual element control Easy expansion/growth to VFDs for the pumps Remote and local web access for managing from phone/tablet/desk 7" touch screen Supplied with three temperature probes and cable Total Amperage Draw: 250 amps at 3ph 208V Made for MB by Electric Brewing Systems UL listed 30" x 30" x 12" This product is supported by Electric Brewing Systems. For instruction manuals and troubleshooting, click here. Power requirements listed represent actual amperage draw.  Please consult a licensed electrician to determine what amperage breaker is required based on your local codes. Please Note: This item requires a professional electrician for installation. It will also require punching for your conduit runs.   

Read more less

Filter hops, grains, coffee grounds, and other kettle additions Screen sits tight to the edges with the included BrewBuilt silicone screen gasket All stainless welded components with handle for easy install and removal The BrewBuilt Kettle Screen fits perfectly in the BrewBuilt Brewing Kettle and can be used to filter hop additions, convert the kettle into a mash tun, or for making large batches of cold brew coffee. The welded stainless steel flat bar feet sit on the bottom of your kettle and positions the screen approximately 3/8" above the kettle's bottom port. The silicone gasket creates a tight seal around the kettle wall to retain solids above the screen when transferring liquid out of the kettle.

Read more less

Connect EVABarrier tubing to 3/4" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL13888

Read more less

This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 9.5 mm OD tubing (D1719).  Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14441  

Read more less

Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/16" or 1/4" ID tubing to 5/16" or 3/8" ID tubing. The barbs are slightly undersized at 6 mm (0.24") and 8 mm (0.31"). Made from 304 stainless steel.

Read more less

Stainless steel joiner fitting for joining multiple lengths of tubing. Recommended for 3/16" to 1/4" ID tubing. The barbs are slightly undersized at 6 mm (0.24"). Made from 304 stainless steel.

Read more less

Replacement PRV Spring for WilliamsWarn BrewBottler.

Read more less

Replacement PRV Stem for WilliamsWarn BrewBottler. Does not come with any additional fittings or seals.

Read more less

Replacement Filling Head Compression Spring for WilliamsWarn BrewBottler.

Read more less

Replacement Filling Head Body for the WilliamsWarn BrewBottler. Does not come with any additional fittings or seals.

Read more less

Jazz up your kegerator, home bar or commercial beverage dispensary with these stylish decal holders. Clamps directly on to the beer shank coupling nut so you don't have to remove the faucet to put on the decal holder or to swap out the decal itself. Made from chrome plated plastic with a soft padding to protect your draft components from scratches. Easily attach or remove the decal holder with a philips head screw dirver. This unit will fit a 73 mm (2.8") diameter decal, sticker or label. Also avaialbe in 82 mm (3.2") diameter. KegLand Part Number: KL00871  

Read more less

Jazz up your kegerator, home bar or commercial beverage dispensary with these stylish decal holders. Clamps directly on to the beer shank coupling nut so you don't have to remove the faucet to put on the decal holder or to swap out the decal itself. Made from chrome plated plastic with a soft padding to protect your draft components from scratches. Easily attach or remove the decal holder with a philips head screw dirver. This unit will fit an 82 mm (3.2") diameter decal, sticker or label. Also avaialbe in 73 mm (2.8") diameter. KegLand Part Number: KL00888  

Read more less

The ANVIL Foundry™ is the most versatile all-in-one brewing system available. From the triple element low watt density dual voltage heaters for blazing fast heating speeds, to the unique high flow grain basket, you won't find a more powerful feature rich product. Key Features: 240V Operation 6-20P plug 4000W 17A for Faster Heating & Better Boils. Cleaning is a breeze with the Patented Removable False bottom. Grain Capacity - 36 Pounds Double Wall Insulation Maintains Mash Temps and Increases Heating Speeds. Linear Digital Power Control and Solid-State Switching for Fine-Tuning your Boil. Turbo 500 Distillation Ready. Includes High Capacity Stainless Immersion Chiller with Hoses & Fittings. External Pump Won't Plug and is Easy to Clean. No Need to Disassemble Entire Unit! Use for Other Pumping Needs too. Three Sizes Available: 18 Gallon for 10 gallon batches, 10.5 Gallon for 5 Gallon Batches and 6.5 Gallon for 2.5-3 Gallon Batches. Minimum batch size: 5 gallons Optional Recirculation Pump Kit Optional Swirly™ Whirlpool Wattage - 6-20P 240V = 4000 watts Caution! Do not CLAMP the lid in place while boiling. The steam buildup can lead to severe burns.  The lid should only be clamped when used for distillation. Read all instructions and practice safe brewing.  

Read more less

Replacement PET Tank for 60L All Rounder FermZilla. Normal wear and tear may lead to stress marks or other potential points of failure when the tank is used under pressure. We recommend visually inspecting the unit for signs of wear every 6-12 months, and conducting a hydro test every 2 years. The  hydro test process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.   KegLand Part Number: KL15226 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.  

Read more less

KOMOS stainless S-Style beer tap for European brand kegs including Heineken, Newcastle, Pilsner Urquell, and Stella Artois. The coupler comes without fittings so it can be adapted however the user sees fit. When assembling, insert the rubber "duck bill" check valve into the side gas-in port. The check ball and ball retainer are placed in the top beverage-out port. Nuts and tailpieces for standard draft line and Duotight fittings for use with EVABarrier can be found below. The Green corny keg-style PRV is rated to 4.5 BAR (65 psi). It can be swapped out with PRVs with a lower or higher pressure rating if desired. Always check the pressure rating of your keg before swapping PRVs.

Read more less

These 5/8" Vinyl gaskets are used anywhere you're mounting a tailpiece. This could be on the back of your draft faucet shank or on either port of a commercial keg coupler. Comes in a convenient zip lock bag.

Read more less