Beer Making

Replacement malt pipe for the 200L Braumeister

Read more less

One of our most complex recipe kits, this clone of North Coast Brewing Co.'s Old Rasputin continues to improve the longer it's aged Includes Apollo™, Northern Brewer, and Willamette hops Estimated ABV: 8.5-10% Estimated IBUs: 70-80 Makes 5 gallons of finished beer Wow.  If you've never tried the North Coast Brewing Co. Old Rasputin, then you need to brew our clone version of it.  If you have tried the North Coast Brewing Co. Old Rasputin, then you know what we're talking about, and need to brew our clone version of it! This imperial stout is one of our most complex recipe kits.  Not only because of the ingredients invovled (2 types of extract, 5 specialty malts, and 3 different hops!), but because of the mouthfeel, flavors, and aromas it provides.  This is also one of those beers that continues to improve the longer it's allowed to age.  Our Old Bearded Stout is bold, boasting an incredible roasty, bready flavors, and aromas of chocolate and coffee.  Coming in at right around 8.9%, this is a great beer to "just have one" of, but we won't blame you if you go for a second! Makes 5 gallons Estimated Original Gravity:1.083-93 SRM (Color Range): 38-39 IBUs: 70-80 Estimated Alcohol Percentage: 8.5-10%   Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.      

Read more less

This hop-forward beer recipe kit is modeled after the highly sought-after Ballast Point Sculpin® IPA Bittered with Warrior® hops and finished with a beautiful blend of Cascade, Simcoe®, and Chinook late additions Estimated ABV: 7% Estimated IBUs: 62-69 Makes 5 gallons of finished beer Contrary to its name, Ugly Fish IPA is actually one of the most beautiful beers we have to offer!  Designed as a clone of the highly sought-after Ballast Point Sculpin® IPA, the Ugly Fish IPA is a hop masterpiece.  This beer starts with a very clean bitterness from Warrior® hops, and finishes with a beautiful blend of Cascade, Simcoe®, and Chinook late additions.  With almost 10 ounces of hops, the Ugly Fish IPA is definitely a hop forward beer, but does have a solid malt profile that stands up to those hops and helps to keep it reasonably balanced. If you're looking to treat your taste buds to a beer that we think has been hopped perfectly, we highly recommend the Ugly Fish IPA! Makes 5 gallons Estimated Original Gravity: 1.067-72 SRM (Color Range): 6-8 IBUs: 62-69 Estimated Alcohol Percentage: 7% Our recipe kits DO NOT include grain bags, yeast or priming sugar. To find our yeast recommendations, choose your preferred kit option above and then select the drop-down menu under “Yeast Options”.  For more info, click on the recommended yeast(s) below in the “You Might Also Need” section below. All included steeping grains will come milled.   Liquid Malt Extract (LME) vs. Dried Malt Extract (DME) MoreBeer! recipe kits are offered in both Liquid Malt Extract and Dry Malt Extract so that our customers can choose the format that best suits their needs and brewing style. LME is a viscous liquid, similar in consistency to maple syrup. In addition to being the more affordable option, many brewers find LME easier to handle than dry extract. DME is more condensed and comes in a powder format that is similar to baking flour. Although it’s a little more costly, DME is naturally lighter in color and stays fresher for longer. We highly recommend DME when brewing light colored beers.     Simcoe® and Warrior® are registered trademarks owned by Yakima Chief Hops, LLC.  

Read more less

Anvil Brewing Equipment brew kettles are as durable as they get, with the 5.5 gal version fitting well on a stovetop and the larger versions sitting nicely on the Anvil high performance burner. This rugged kettle is constructed from high quality materials and is designed for a lifetime of demanding use.   Standard Features Include:   -Heavy 18 gauge 304 stainless steel with reinforced lip for durability and easy cleaning. -Induction capable tri-ply clad bottom. -Internal etched level graduations in gal and liters for accurate measurements -A dual scale F/C thermometer – included standard! -Solid cast stainless steel handles for comfort and durability – no rivets to leak or harbor contaminations! -Lid conveniently rests on kettle handle -Ideal 1.2 height to diameter ratio for optimum brewing performance -Purpose built stainless steel ball valve with integral bulkhead seal is rock solid, easy to install and disassemble, and will never leak. -Dip tube drains to within 3/8” of the bottom of the kettle.   Anvil Brewing Equipment provides everything you need in a brew kettle! But if you want more, add a boil kettle strainer for the ultimate in hop and trub filtration or convert your Anvil Brew Kettle to a mash tun with our optional perforated false bottom.   SKU Size Kettle ID (in.) Height (in.) BE340 5.5 12 11.625 BE341 7.5 12.75 14 BE342 10 13.75 16.75 BE343 15 16 19 BE344 20 17.75 21.25   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

Racking Arm Replacement  Item(s) Included (1) Racking Arm Replacement (2) Replacement  set of O-rings included 

Read more less

Replacement Tie Rod / Level Indicator for 200L Speidel Braumeister. Note: This unit does not contain the temperature sensor that is in the new units, making it incompatible with new Braumeister units that came out in late 2020. Speidel Part Number: 77347

Read more less

Modular legs allow 7”, 16”, and 24” operational heights. Mount to a bench, drain directly into a carboy, or make a 2 tier brew system.

Read more less

Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away.  This system will hold your set temp both when it gets cold and when it gets warm!   This kit is for owners of the Ss standard edition Chronical Half Barrel fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.  Kit contents include: 1x heater pad for Half BBL Chronical  1 x power supply 110-240V and 6A power supply for global use 1 x two-way switchable FTSs controller  1 x flat FTSs lid  1 x chilling coil  1 x lid mounted thermowell  10 feet of vinyl tubing  1 x lid stopper  1 x submersible pump  1 x custom tailored neoprene jacket for Chronical Half BBL fermenter Digital temp controller displays both C/F Chill from 0.5-2 degrees F per minute Custom lid with 304 Ss immersion chiller coil 304 Ss weldless lid mounted thermowell Accurately monitor and control temps

Read more less

Set a temperature on the controller, provide a source of chill water for your system, tuck the heater pad underneath the neoprene jacket, plug into the wall and walk away.  This system will hold your set temp both when it gets cold and when it gets warm! This kit is for owners of the Ss standard edition Chronical 14 Gallon fermenter that are looking for a two-way switchable controller with both heating and chilling functionality.  Kit contents include: 1x heater pad for 14 Gal Chronical  1 x power supply 110-240V and 6A power supply for global use 1 x two-way switchable FTSs controller  1 x flat FTSs lid  1 x chilling coil  1 x lid mounted thermowell  10 feet of vinyl tubing  1 x lid stopper  1 x submersible pump  1 x custom tailored neoprene jacket for Chronical 14 gallon fermenter Digital temp controller displays both C/F Chill from 0.5-2 degrees F per minute Custom lid with 304 Ss immersion chiller coil 304 Ss weldless lid mounted thermowell Accurately monitor and control temps

Read more less

This silicone gasket is for Ss InfuSsion 20 gal false bottoms. Does not fit on Norcal false bottoms.

Read more less

This silicone gasket is for Ss InfuSsion 10 gal false bottoms. Does not fit on Norcal false bottoms.

Read more less

This is a 304 stainless steel blow off tube for Ss Brewtech 1/2 barrel Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.

Read more less

This is a 304 stainless steel blow off tube for Ss Brewtech 14 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a built-in relief valve. The two-piece cane has an outer diameter of 15 mm (approx. 9/16") and 3/8" NPT where they connect. 3" TC gasket and clamp not included.

Read more less

This is a 304 stainless steel blow off tube for Ss Brewtech 7 gallon Chronical fermenters. Fits perfectly on the 3" TC dome lids and comes with a relief valve built into the cane. 3" TC gasket and clamp not included.

Read more less

We are proud to present our line of premium quality stainless steel tanks. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of beer. Convenient top hatch makes cleaning and oaking easy. Heavy duty sealing mechanism and thick gasket ensure an air tight seal. The inside is finished to Speidel quality standards. Bottom drain fittings are 1.5" Tri-Clamp. Conical tanks come standard with legs. Also this tank specifically is made to handle up to 1.2 bar (17.4 psi). Key Features Full Jacket - Fermenters are equipped with a jacket that covers all accessible areas of the tank. This will allow you to hook it into a glycol system (see our Kreyer Chilly45, GLY411) for complete temperature control! Included Options - Features 1.5" T.C. outlets (One complete drainage at the bottom of the cone, one in the middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. These are equipped with hardware at the factory, one has a sample valve; the other has a thermowell/thermometer combination.  Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively means cleaning is too easy. Watch the Krausen wash right off! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Thickness - Speidel tanks are on average around 25% thicker than Italian manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - Tanks are outfitted with conical, pocketed bottoms for total drainage, which maximizes product yield at rackings and makes cleaning a snap. Tri-Clamp Valve Ferrules - All Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings. Other sizes and custom configurations are available at additional cost upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Features Full Volume of 625l (165 gal). Perfect for fermenting single batches brewed on the Speidel 500L Braumeister Handles pressures up to 1.2 bar (17.4 psi) - use as a bright tank or unitank! 1.5" T.C. Drain, Racking Port, and Lid outlet. 8.5" Top hatch for easy cleaning and additions. 2 X DIN10 Fittings w/ Sample Valve and Thermowell/ Thermometer combo Dimensions: 32.25" D x 85" H (820mm D x 1661mm H) Please note: this tank does not include the 1.5" TC Tee with pressure gauge and valve pictured in the top right of the product photo. See our CONP775 listed below under "You Might Also Need".

Read more less

The Braumeister by Speidel is an amazing brewing system, allowing all-grain electric brewing in a compact, all-in-one design.  Now, the Braumeister can provide an even more ideal brew day, by controlling the entire brew process from your Windows 7 or higher device!  The Braumeister Mobile Wifi Unit is a modular internet connectivity device from Speidel, displaying temperatures and  times, running all aspects of the system, as well as updating firmware as released! Supervises the brewing process within the wireless local area network via a wireless internet router Updates the Braumeister control system to the latest software (firmware) Works with all 10L to 500L Braumeisters with a 2015 control unit or later Network standard: IEEE 802.11 b/g/n Requires PC with at least windows 7 or higher Please Note: This unit will only function on Speidel Braumeisters with Generation 2 Black Controllers (2015+). 

Read more less

This shortened malt pipe will enable our 20L Braumeister to brew 10L batches (from 5 gallons to 2.5 gallons). The way these Braumeisters function during the mashing stage, a smaller batch than 20L is usually not an option. By utilizing this shortened mash pipe, you can now brew either a 2.5 or 5 gallon batch with your 20L Braumeister!

Read more less

This is a dome lid for Ss Brewtech 1/2 bbl Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.

Read more less

This is a dome lid for Ss Brewtech 14 gal Chronicals. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.

Read more less

This is a dome lid for Ss Brewtech 7 gal Chronical and Brew Bucket fermenters. It features a 3" tri clamp opening at the top to facilitate dry hopping or cleaning your fermenter in place. Made from 304 stainless steel. Does not include 3" TC gasket and clamp.

Read more less

Gasket replacement for the Ss Brewtech Brew Bucket Mini. Made with brewer's grade silicone.

Read more less

Ss Brewtech Brew Bucket Mini replacement lid. Comes with a gasket and 17mm punched hole for an airlock or tubing. Made from 304 stainless steel.

Read more less

If you bought a 3" TC dome lid for your standard Chronical this covers up that large 3" tri clamp opening. 1/2" tubing or an airlock and #2 stopper fit nicely in the 17mm hole. This cap comes standard with Brewmaster Chronicals and only fits on a 3" tri clamp flange. Comes with a 1/2" hose barb and pressure relief valve. 3" tri clamp gasket and clamp not included.

Read more less

This Ss Brewtech fitting helps with recirculation in your mash tun. It has a 1/2" FPT on the mash tun side, a 1/2" MPT on the opposite side, and a 1/2" hose barb on the bottom of the tee. Made with 304 stainless steel.

Read more less