Beer Making

The classic stitch up hop sock is suitable for dry hopping or steeping grain or spices in the boil. If you have a heat exchanger, we highly recommend bagging your hops if your doing a hazy IPA, DIPA, or any highly hopped recipe, as it may clog your plates or even your pump! Rated up to 110°C (230°F). Dimensions: 130 mm wide (5.9") 580 mm long (31.4") KegLand Part Number: KL06767

Read more less

Keep your fermentation temperature stable by pairing the BrewBuilt X-Series Uni Conical with one of these silicone heaters. Designed to wrap around the conical portion of the tank, these pads will gently heat your fermenter from the bottom up to keep your yeast comfortable and working hard. A must-have for brewers living in colder climates or if you want the peace of mind that you can ferment ale or kveik strains no matter the time of year. Having a conical heater also comes in handy if you chilled your wort below yeast pitching temperature and want to warm it back up before pitching. We always recommend pairing the heating pad with a temperature controller so it will only be powered on as needed. A dual stage temperature controller like the Inkbird is a great option for controlling both heating and cooling with a BrewBuilt CoolStix™. Compatible with all X-Series Conicals including the new X3! Notes: For warmer climates, go one size down For colder climates, go one size up Safety Shut off: Stops at 120°F Excess heat after flocculation can cause off-flavors from autolysis 3M brand adhesive back for permanent installation Tested by our in-house engineers, we created a recommendation chart to help you choose the heater that best suits your batch size. X1 Conicals: Watts 7 Gal 14 Gal 25 Gal 38 Gal Min. Circumference Top Curve Length 40 Fits Fits Fits Fits 21.6" 20.1" 80 Recommended Fits Fits Fits 29.3" 27.8" 120 X Recommended Fits Fits 35.6" 34.1" 240 X X Recommended Recommended 46.75" 45.25" 500 X X Fits Fits 57.9" 56.4"   X2 Conicals: Watts 7 Gal 14 Gal 25 Gal 38 Gal Min. Circumference Top Curve Length 40 Fits Fits Fits Fits 21.6" 20.1" 80 Recommended Fits Fits Fits 29.3" 27.8" 120 X Recommended Fits Fits 35.6" 34.1" 240 X X Recommended Recommended 46.75" 45.25" 500 X X X X 57.9" 56.4"   X3 Conicals: Watts 7 Gal 14 Gal 25 Gal 38 Gal Min. Circumference Top Curve Length 40 Recommended Fits Fits Fits 21.6" 20.1" 80 X Recommended Fits Fits 29.3"

Read more less

This Duotight to Male Elbow fitting can be used to route tubing connecting to 8 mm Duotight Ball Lock QDs. This is a great way to keep tubing organized and out of the way in your kegerator. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18456    

Read more less

Replacement temperature control circuit board for the KOMOS standard, deluxe, or Double-Wide kegerator. Not compatible with outdoor or commercial kegerators.  

Read more less

32 oz crowler cans and ends. Case contains 149 units. 300/307 x 710 Crowler. These crowlers can be used with the Cannular Pro Can Seamer with the Chuck Adapter for Ball 300 Ends. Please note that up to 5% of the cans are likely to be dented or damaged in transit.  

Read more less

Picnic tap with 6.35 mm end piece for easy connection of 6.35 mm Duotight push-in fitting. Pair with the 8mm x 6.35mm reducer to use with EVABarrier draft tubing. Duotight fitting sold separately. KegLand Part Number: KL21821

Read more less

The Tapcooler Counter Pressure Bottle Filler is the #1 way to fill bottles of your homebrew, directly from your kegging system. No more messing with alternate liquid lines or hard to assemble contraptions. Just fit the Tapcooler into any forward sealing faucet (i.e. Perlick, Intertap/Ultratap/Vent-Matic, etc..), hook up a CO2 line, and you're good to go. Fill bottles for a competition, or just fill a couple take home bottles for your friends. The Tapcooler is quick and easy to use, and will help maintain the flavor, aroma, and carbonation level of your beer so it tastes the same out of the bottle as it would out of the tap. For starters, a counter pressure bottle filler is better than most bottling solutions, as the bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution. The Tapcooler solution improves upon the standard counter pressure filler, as it plugs directly into your draft system faucet (tap). Most solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional prep (i.e. more time). With the Tapcooler, you can have it setup and ready to go in less than a minute! The Tapcooler design is also advantageous because after you are done filling the bottle, it stays in place hooked up to your faucet vs. other fillers require you to set aside and pick back up again for the next bottle. Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16 in. push-fit line, or connect your line to the included barb fitting. Optionally, you can purchase the gas ball lock adapter, which gives you the ability to attach a gas (gray) disconnect directly to the filler unit. This optional accessory is a must have in our book! With the Tapcooler design, your beer and CO2 are filled from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process The telescoping bottle connection tube allows you to fill bottles as small as 4.5 in. tall up to 12.5 in. You can fill taller bottles with the Tapcooler, but the tube will not reach the bottom of the bottle, which can lead to some splashing. When filling large mouth containers, a bottle stopper of suitable size and with a 9 mm hole may be used. The filler features a push button CO2 purge valve, which allows you to purge the bottle of oxygen before & after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer/foam to escape when filling. One of our most favorite features of the Tapcooler, is that is super easy to clean. Cleaning other bottle fillers can be a chore and take lots of time. The Tapcooler comes apart easily and allows you to clean all parts effectively and easily after each use. All metal parts that come into contact with your beer, are made of stainless steel (SS304). The barb and ball lock CO2 adapters are made of aluminum. Lastly, the Tapcooler comes chock full of optional accessories, which will adapt your filler perfectly to your setup. See the related parts section below for list of them! Forward-Sealing Faucet Compatibility Tapcooler fits Intertap, Nukatap, Ultratap, Vent-Matic, and Perlick 600 series faucets. These fillers can be converted to fit Perlick 500 series with the optional tap connector. Cannot be used with ventilated beer taps, i.e. non-forward sealing beer taps.   Hooks up directly to any forward sealing faucet for quick and easy use. Quick setup and easy maintenance. Perfect for bottling for competitions, sending bottles home with friends, or just to have some bottles on the go! A range of accessories are offered for more range and easier use! Purge bottles with CO2 before and after filling for longer lasting beer! Pressure relief valve allows for control over filling speed and allows excess foam to escape for the perfect pour every time! Stainless Steel design Easy to use and clean!  

Read more less

Splash Guard for Cannular Pro Semi-Auto Bench Top Can Seamer (CAN110). For the splash guard for the manual Cannular Can Seamer, see CAN105.   Kegland Part number: KL16728

Read more less

CellarScience Glucabuster improves lautering and yield and makes any downstream filtering easier. First the highly concentrated β-glucanase break down the glucan formation that can lead to stuck mashes and slow run off. Then the included Xylanase and Cellulase break down the polysaccharide chains of arabinoxylan and cellulose. Together, all three enzymes help keep todays challenging mashes flowing right. Use: Add 1/4 tsp per 5-gallon batch at mash-in. Glucabuster works in a range of 120-185°F and ideally at a pH range of 4.7-7.0. Additional Notes: Endosperm cell walls are made up of non-starch polysaccharides, of which, in barley, β-glucans account for 75% with arabinoxylan (pentosan) and cellulose accounting for most of the rest. In wheat, the arabinoxylan content is higher. Glucabuster is composed of the cell wall hydrolases β-glucanase, xylanase, and cellulase, which break down the β-14 bonds in these polysaccharides. These enzymes can be equally important to their more famous starch degradation enzymes, α-Amylase and β-Amylase.  Glucanase, xylanase, and cellulase are naturally found in malt but decrease during the kilning stage of malting. Depending on your recipe, adding these enzymes is important to assist with lautering and later with filtering. Refrigeration is recommended, but store at least below 70°F. The recommended shelf life is 12 months from the date the package is opened.    

Read more less

WildBrew™ Sour Pitch is a high-performance, high-purity lactic acid bacteria specifically selected for its ability to produce a wide range of sour beer styles. WildBrew™ Sour Pitch produces a clean and balanced citrus flavor profile typical of both traditional and modern sour beer styles. When inoculated at optimal  temperature and the right conditions it is a powerful, safe and easy way to handle bacteria for various beer  souring techniques, such as the typical kettle souring process. Besides providing an outstanding performance, WildBrew™ sour Pitch is capable of delivering consistent results for brewers. Styles brewed with this bacteria can include, but are not limited to, Berliner Weisse, Gose, Lambic, American Wild and Sour IPA.   Beer Styles: Sours Inoculation Rate: 1g/10L or 10g/hL Fermentation Dose: 86-104°F (30-40°C) pH Range: 3.2 - 3.5 Hop Tolerance: 4 ppm iso-alpha acid / 8 ppm beta acid *See the technical data sheet below for information on rehydration, usage and storage.

Read more less

Replacement Malt Pipe Boiler Screen for 35L BrewZilla. Pull ring assembly included. For Gen 3 and older BrewZillas.

Read more less

This handy clip slides over a corny keg beverage out post and allows you to hang a hand held faucet when not in use. Definitely beats picking the faucet up off the ground every time it dops. Does not fit pin lock kegs.

Read more less

Get repeatable results by adding this flow meter to your oxygenation setup. Since most disposable oxgyen cylinders are used with simple regulators without gauges, it's hard to say exactly how much oxygen is being released. This device will allow you to dial in the flow rate and make sure you're adding the same amount of oxygen from batch to batch. Once yeast pitching temperatures are reached, we recommend adding pure O2 at a 1L/minute flow rate for 60 seconds to acheive the recommened 10-14 ppm dissolved oxygen. 0.5 micron diffusion stone recommended. 1/4" Male Flare Inlet/Outlet Duotight Fittings for 8 mm OD Tubing Included Scaled for 0.1 to 1.5 L/min Flow Rate 3.6" H x 0.9" W Kegland Part number: KL13185

Read more less

The KOMOS shank wrench is specifically designed to tighten the nut on the back of a faucet shank. The double offset allows for clearance inside coffin boxes and larger round towers and to move the handle away from the insulation or other nearby objects. Laser Cut from 12 guage 304 Stainless Steel. Features: 1-1/16" 12 Point Wrench 1-1/8" 12 Point Wrench Made from 304 Stainless Steel  

Read more less

The Blow Tie Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the included Push-In Pressure Gauge. The kit includes everything you'll need to use the spunding valve right out of the bag.   Kit Includes: BlowTie Pressure Gauge (0-40 psi) Ball Lock Disconnect Duotight Tee & Flared Duotight Fitting 2x Lengths of EVABarrier 8mm OD Tubing  

Read more less

1.9 °L - Viking Malt - Superior quality European 2-row malt. Ideal base malt for all beer styles as it is germinated like a domestic 2-row pale malt, but kilned like a pilsner malt.  This means that it is very highly modified, but still very light in color.  This malt is the perfect base malt for modern craft breweries. Whether you're brewing a blonde ale, a hazy IPA or an imperial stout, this is the best base malt on the market. Malt Specification: Moisture % - max. 4.5 Extract fine % dm - min. 81.3 Color °L - 1.9 Protein % dm - max. 10.1 Kolbach Index % - 44.4 Beta-glucan in wort (mg/l) - 185 Friability % - 87 Glassy grains % - 0.4  

Read more less

Thick neoprene jacket for the 65 L Brewzilla or DigiBoil. This jacket will fit Gen 3.1.1 and older BrewZilla models. It is not compatible with Gen 4 BrewZillas. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65 L Brewzilla and DigiBoil Made from thick neoprene which is also easy to wash after use Put it on to speed up heating; take it off to speed up chilling Kegland Part Number: KL08921

Read more less

DRE. Add alcohol without adding any residual sweetness. Lightens flavor. Use for light style beers, or any beer where you want to add fermentables without increasing body. Sugars by weight: 5% Glucose, 42% Maltose. Gluten free.

Read more less

Dark rock candi sugar from Belgium. Add great flavor and fermentables to Belgian dark beers, without adding residual sweetness. Color: 275 degrees Lovibond.

Read more less

Also known as brewing salts, it is a mixture of Gypsum, Calcium Carbonate and Epsom Salt. 1 tsp adds 1119 ppm per 1 gallon. For Pale Ales in the Burton on Trent style. Burton salts can come in either crystal or powdered form. We ship what is available at the time your order is placed.   30g per 5 gallons will provide: 266 ppm Ca 63 ppm Mg 159 ppm Carbonate 631 ppm Sulfate

Read more less

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!   Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL02370

Read more less

This Duotight reducer is used when stepping down from 9.5 mm OD (D1719) to 8 mm OD EVABarrier tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!   Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL06941

Read more less