Beer Making

Replacement Top Cap for 1-3 tap Matte Black Tower. Direct replacment for the KOMOS Matte Black Draft Tower.

Read more less

Design specially for the Ss Grain Mill. The top plate has precision machined mounting holes as well as a grain chute port. The removable bottom plate is designed to easily align a standard five-gallon bucket commonly used in grain transfer for home and nano breweries. Ss Grain Mill NOT included 304 stainless steel Approximately 20" x 20" x 17" Only compatible with the updated HD Casters. Not compatible with Standard length Casters. 

Read more less

Designed to mount an eController to a Brew Cube. Additionally, the Side Shelf which measures 270mm x 270mm can be use to hold a RIMS or other accessory. Please select your controller size as the mounting plates are different widths. *3V Mount shown in photo

Read more less

Designed to mount a pump to Brew Cube | Perforated Shelves. The plate is designed with two pump mounting patterns: 66.68mm x 60.20mm | Fits Chugger Pump and other home brew pumps 93.41mm x 71.91mm | Fits Chugger Max Pump

Read more less

Valve Tree kit designed for Brew Cubes. Includes: Valve Tree (4) Pure Flow Valves (12 PSI Max) Brew Cube to tree clamp mount Perforated base plate (9) 1.5" TC clamps (1) 1.5" TC gasket Needed for completion: Pump Tubing and hose barbs to connect pump to valve tree, and valve tree to vessels.

Read more less

Designed to be used to connect two brew cubes of different heights together. For two cubes of equal height simply use the Brew Cube | Connection Bolts.

Read more less

The Brew Cube | Hose Hanger is designed to be mounted to the side of a Brew Cube and used to hang hoses and other accessories from the Brew Cube. Includes mounting hardware. The Garden Hose Hanger can be used to coil up a garden-style hose for easy brew day access. The U-Hook Hose Hanger can be used to rest accessories like tubing, mash paddles, and gloves.

Read more less

Pack of six bolts to connect two brew cubes together.

Read more less

5 pack of hooks designed for the Brew Cube | Peg Wall

Read more less

Leg extensions to add 12" of height to a Brew Cube. Can be paired with Brew Cube | Shelf

Read more less

Pegboard Tool wall designed to be mounted to the side of a Brew Cube. Available in 12" and 24". NOTE: The 24" version is designed to be used with leg extensions.

Read more less

Designed to fit in between legs or between feet (or casters) as a shelf on Brew Cubes. Perforated Shelf can be used to mount pumps and accessories. *Note these will not work as top plates.

Read more less

The Brew Cubes started as a side project for the Engineering team. We wanted a modular system for testing and prototyping. The Brew Cubes gained popularity internally, and we decided we had to make them available to homebrewers. 19.75" x 19.75" x 17" Modular Design The Brew Cubes started as a side project for the engineering team. We needed a modular system for testing and prototyping a variety of homebrew equipment configurations without fabricating custom brew stands for each build. They quickly gained popularity internally for their modularity and flexibility. The Brew Cubes are designed to grow alongside the brewer's equipment needs and skill level; there's really no right or wrong way to build a brewery, and that's where the modular design of the Brew Cubes shines. The core of the Brew Cube is the base kit, as shown in the exploded view. From there, any variety of shelves and accessories can be added on. We'll have many of the core accessories available immediately, but we view this as a long term platform and intend to introduce thoughtful additions to the product line over the coming months and years. Unlimited Flexibility From stands and carts to parts racks and shelves, flexibility is at the heart of the Brew Cube's design. Every brewer and brewery has different needs, that's why there's no right or wrong way to use Brew Cubes. Designed to bolt together, it's easy to string three or more cubes next to each other, or add optional shelving, leg extensions, and peg walls for near-endless customization. Pro Inspiration for the Home Brewer When designing the perfect homebrew rig, we took inspiration from some of the best and most sought after pro features our team has been engineering into our larger brewhouses. From the dual pump architecture to the newly patented valve tree, Brew Cubes can unlock the full potential of your Ss Brewtech equipment. 3V eBrewing setup shown in example photo: (3) Brew Cubes (2) Brew Cube | Connection Bolts Brew Cube | Valve Tree 3V eController with Brew Cube eController Mount (2) eKettles InfuSsion Mash Tun RIMS (2) TC Pumps Various hose barbs, valves, silicone tubing, and fittings

Read more less

Designed for situations where your FTSs Touch and fermenter are more than 3ft away from your power supply. Can be used to extend the pump and/or power cable.

Read more less

Designed to allow the use of older FTSs pumps and heaters with new FTSs Touch controller.

Read more less

Replacement false bottom for the 35L Gen 4 BrewZilla. Includes eye bolt pull-ring assembly. Not compatible with older models of BrewZilla or the DigiBoil. KegLand Part Number: KL27304

Read more less

This handy tool is inserted into the bottom of your keg coupler to lift the ball check valve, allowing you to flush cleaning solution through from the tap without needing to disassemble the keg coupler. A simple solution to save you time while cleaning draft lines. Comes in a convenient zip lock bag.

Read more less

This yeast produces a high intensity of the traditional Brettanomyces characters in beer, such as horsey, smoky and spicy flavors. As the name suggests, this strain is found most often in lambic style beers but is also commonly found in Flanders and sour brown ales. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Attenuation: N/A Flocculation: Low Alcohol Tolerance: 8-12% ABV Optimum Fermentation Temp: 85°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

The FTSs Touch | Nano Jacketed Tank Upgrade kit has been designed to leverage components from our home brewing FTSs Touch line in an effort to provide a low-cost solution to pair a 1, 2, or 3.5 BBL Nano Jacketed Unitank and Nano Jacketed Brite Tanks with one of our 3/8 HP or 3/4 HP glycol chillers. This system features a custom TC thermowell adapter, along with a silicone insert to adapt the temperature probe from an FTSs Touch controller to the welded-in sleeved thermowell port on our line of Nano Jacketed Tanks.  In addition, a custom-designed low-pressure open silicone check valve is included to prevent backflow to the chiller's reservoir when glycol is not flowing.  The kit includes 1/2" NPT to 3/8" barbs to adapt the glycol ports for use with our standard FTSs Touch pump.  Since most Nano Jacketed Tanks are set up for use with a pressurized loop glycol system typically found in commercial breweries, this kit offers a Nano brewery an affordable, easy-to-setup alternative to more elaborate or expensive installations.  Everything is included to interface a single Nano Jacketed Tank between an FTSs Touch and Ss Glycol Chiller.  Cooling options for Ss Branded Glycol Chillers  FTSs Touch | Jacketed Tank Kit — Designed to be paired with our line of Ss Glycol Chillers.  Cooling options for Pressurized Glycol Loops on Commercial Chillers  FTSs Pro Touch (+ FTSs Pro Touch Solenoid Valve)  — Designed to be paired with pressurized-loop (Non-Ss Brewtech) commercial glycol systems. Not recommended for 5bbl & Larger Tanks Includes: (4) FTSs hose clamp for 3/8" barbs (1) Hose barb - 3/8" to 1/2" MPT (1) Silicone thermowell cover (1) 1.5" TC sleeved thermowell adapter (1) FTSs harness extension 3 ft (1) Silicone check valve Works with 1, 2, and 3.5 bbl Nano Jacketed Tanks Not required for Unitank 2.0  

Read more less

Inspired by the patented valve trees on every Ss Brewtech Pro Brewhouse. The Portable Valve Tree makes it easy to transfer your brews in and out of your brew vessels without needing to constantly disconnect and reconnect your pump. Pre-drilled holes in the base plate allow Chugger TC Stainless Head Pumps to be installed with ease. Taking samples is critical during a brew day, so just like the Pro Brewhouses, the Portable Valve Tree includes a sample valve. The Pure Flow Sample Valve, pulled from the Chronical 2.0, is the perfect pairing. Kit includes: Valve Tree Assembly (8) 1.5" TC Clamps (8) 1.5" TC Gaskets (1) 1.5" TC Offset Tee (1) ¾” TC Sample Valve (1) ¾” TC Clamp Pump Mounting Hardware *Note that the valve tree is designed to work with nearly any 1.5" TC valves and thus does not include valves. Additional needed parts: 1.5" TC valves and Chugger TC Head Pump  

Read more less

A blend of German Weizen yeast and Lactobacillus bacteria to create a subtly tart, drinkable beer. This blend can take several months to develop tart character making it perfect for brewing a traditional Berliner Weisse. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Attenuation: 73-80% Flocculation: Medium Alcohol Tolerance: 5-10% ABV Optimum Fermentation Temp: 68-72°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

This blend of our favorite New England-style IPA strains is great for producing beers with a hazy appearance and tropical, fruit-forward esters. Producing dry, yet juicy beers, the mango and pineapple characteristics will lend to added drinkability. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Attenuation: 75-82% Flocculation: Low to Medium Alcohol Tolerance: 8-12% ABV Optimum Fermentation Temp: 68-72°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

Digital tank sensor (DS18B20) with gasket. Recommended hole size: 22mm

Read more less

This pre-assembled diffusion stone can be easily integrated with the Hop Bong Sight Glass to make an inline oxygenation system. At the top you have the Yellow Ball Lock Cap with PCO1881 threads that will install on the side port of the Hop Bong. A short piece of 3/16" ID silicone tubing is used to attach the 2 Micron diffusion stone which rests inside the Hop Bong. Connect your oxygen tank to the ball lock cap with a ball lock quick disconnect, turn on the gas, and pass your chilled beer from your kettle through the Hop Bong and into your fermenter. In the same fashion, this assembly can be used to help carbonate your beer by feeding CO2 into the ball lock cap and passing your finished beer from your fermenter through the Hop Bong and into your keg. A complete kit is coming soon, but here are the pieces you'll need to assemble your own Hop Bong Inline Diffusion System. 1.5" T.C. Hop Bong Sight Glass (FE201) (2) 1.5" T.C. Hop Bong Caps (FE203) (2) 1.5" Tri-Clamps (FF100) (2) 1.5" Tri-Clamp Gaskets (FF101) (2) Red Plastic Ball Lock Caps (FE133)

Read more less