Beer Making

Great dual purpose New Zealand hop with soft bitterness and tropical notes. Aromas of passionfruit and peach, as well as apricot, plum, mango, pear, and other stone fruits. Recommended for Pale Ales, IPAs, hop-forward Lagers, Belgian ales, or American wheats. Hop Statistics Alpha Acids: 9.0 – 11.0% Beta Acids: 5.0 – 6.0% Alpha-Beta Ratio: 1.5 - 2.2 Cohumulone: (% of alpha acids): 23 – 25% Total Oils in mls per 100 grams dried: 1.8 – 2.2   Rakau™  is a  trademark owned by New Zealand Hops Limited Company  

Read more less

With the rolling base for the 50L Braumeister, you can easily move the unit around your brewing area and lock it in place with the castor brakes. Do your brewing in one area, then wheel it over to where it's more convenient to clean without ever needing to pick the system up. There's plenty of clearance between the rolling base and the Braumeister, which allows you to open the pump for cleaning and dry it after brewing. A reservoir molded into the base will collect drips and splashes, and then you can position it near a drain to unplug and drain the reservoir. Features: Flexible costers with locking brakes Perfect height for mashing, lautering, and cleaning More clearance under the Braumeister for better access to the pump For transferring the wort to the fermenter, we recommend the Wort Pump accessory Drip pan function for catching boiled over wort or cleaning water Molded-in reservoir for retaining water until you're near a drain 3/4" female threaded outlet for mounting a valve if desired (not included) Base is made and molded out of high-quality, easy-to-clean polyethylene 15.11" H x 25.27" Ø  

Read more less

Launch your bottle caps in style with this funky keyring bottle opener. Kegland Part Number: KL15066

Read more less

Trident™ is a specialized blend with a much wider range of aroma and flavor characteristics than any single hop variety could generate on its own. Although, Trident™ is suitably balanced as is, it could also be added with others to build an even more unique and potent flavor profile. The Trident™ blend is comprised of three unique Pacific Northwest-grown hop varieties.   Hop Statistics: Alpha Acids: 11 – 14% Beta Acids: 4 – 5% Alpha-Beta Ratio: 2.2 – 3.5 Cohumulone: (% of alpha acids): 20 – 30% Total Oils in mls per 100 grams dried: 1.5 – 3.0     Trident™ is a trademark owned by S. S. Steiner, Inc  

Read more less

Please Note: This part is intended to be used with the Manual Cannular Seamer (CAN100) which has been superseded by the Cannular Pro. This item will not work with the Cannular Pro (CAN110). Splash Guard for Manual Cannular Bench Top Can Seamer (CAN100). For the splash guard for the Cannular Pro Semi-Auto Can Seamer, see CAN106.   Kegland Part number: KL16711

Read more less

These tap handles come with a removable, erasable chalkboard surface. Additionally, the back of the tap handle features a chalkboard surface that can be written on as well, which is handy and cool if your tap handle is seen from both sides. The insert is made of a thin sheet of metal and coated with chalkboard paint. The outer portion of the tap handle is made of wood and also painted with chalkboard paint. Note: You might need to use a bonnet angler (D1270) if you converted an upright refrigerator.  Bonnet anglers allow longer tap handles to sit in a more vertical position so they do not angle back and hit the refrigerator door or wall.   Tap Board Features: Includes removable metal chalkboard insert Back of tap handle also serves as chalkboard surface Dimensions: 7.25" H x 2.25" W x 0.75" D  

Read more less

This insert blocks the high flow side perforations on the 10.5 gal Foundry to improve efficiency for small grain bills. By blocking the high flow side perforations on the basket, recirculating wort is directed through the bottom of the basket. Perfect for half batches, or session beers.   Blocks side perforations in grain basket Perfect for half batches or session beers Easily installed and removed Stainless steel construction

Read more less

For use with the BrewBuilt X1 and X2 Uni Conicals. Pairs with the male threaded lid x 2" tri-clamp.

Read more less

Replacement Cap Gasket for Sight Gauge. Compatible with sight gauges MT510, MT520, MT530, and weldless sight gauges WL316, WL321, WL326. Gasket only. Does not include end cap.  

Read more less

Replacement Base Gasket for Sight Gauge. Compatible with sight gauges MT510, MT520, MT530, and weldless sight gauges WL316, WL321, WL326. Gasket only. Does not include base cap.

Read more less

Our yeast brinks give you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The 4" TC welded to the top makes inspection and cleaning a breeze. 1/4 bbl is perfect for up to a 5 bbl batch with most yeasts. The dip tube is about an inch off the bottom to help keep non-yeast solids that separate from your repitch. 1/4 bbl is perfect for up to a 5 bbl batch with most yeasts. Also available in 1/2 bbl size for up to 10 bbl batches and 1 bbl size for up to 20 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.  

Read more less

Replacement lid for the BrewBuilt Flex Chamber Trub Separator & Yeast Harvester. 2" tri-clamp connection.

Read more less

The Pro Pilot System is a true turnkey brewhouse including virtually everything YOU need to get up and running FAST! Perfect for taprooms, pilot systems and neighborhood breweries. No fuss, no hassle, just pure pro brewing power! 3 - BoilerMaker™ Kettles Made in America. Single piece construction from US made stainless steel. Heavy gauge 304 stainless steel. Linear Flow Valve disassembles in seconds for cleaning, allows precise control of flow, and orients in any direction. Rivet free handles, rugged cool touch grips, oriented for easy carrying. Borosilicate glass level gauge. Diptube with rotating racking arm. Lifetime limited warranty on kettles. Accessories Patented button louver false bottom. AutoSparge™ automatically sets the hot liquor flow rate and liquid level in your mash tun.  Adjustable viewing angle thermometer. Whirlpool fitting in boil kettle.   2 - 240V BoilCoils™ Less than 30 W/in² nearly half of the typical ultra low watt density for easier cleaning and scorch free brewdays. Each BoilCoil™ is engineered to preform optimally in your BoilerMaker™ G2 brew kettle for consistent heating performance, boil quality, and boil-off rates. Robust stainless steel construction. Less than ultra low watt density means NO chance of scorching when used as directed. The 240v BoilCoil™ includes a 12 ft factory wired cable with a molded twist lock L6-30P plug. Removable custom engineered plug means cleaning is a snap.   2 - RipTide™ Brewing Pump Ultra quiet motor. Tri-Clamp disassembly for easy cleaning. Integral linear flow control valve.   2 - Tower of Power Temperature Controllers PID Temperature control. On/off/auto mode selector switches. Class A precision RTD temperature sensor. Controllers are table mounted for convenience. Compact enclosure. Brushed stainless cover and gloss black powder coated case that will look beautiful for years.   Heavy Duty Custom Table 14 ga 304 stainless steel. Apron to mount accessories. Legs and lower shelf are stainless. Built-in receptacle boxes. Heavy duty casters for mobility. Adjustable height lower storage shelf. Made in USA. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The Pro Pilot System is a true turnkey brewhouse including virtually everything YOU need to get up and running FAST! Perfect for taprooms, pilot systems and neighborhood breweries. No fuss, no hassle, just pure pro brewing power! 3 - BoilerMaker™ Kettles Made in America. Single piece construction from US made stainless steel. Heavy gauge 304 stainless steel. Linear Flow Valve disassembles in seconds for cleaning, allows precise control of flow, and orients in any direction. Rivet free handles, rugged cool touch grips, oriented for easy carrying. Borosilicate glass level gauge. Diptube with rotating racking arm. Lifetime limited warranty on kettles. Accessories Patented button louver false bottom. AutoSparge™ automatically sets the hot liquor flow rate and liquid level in your mash tun.  Adjustable viewing angle thermometer. Whirlpool fitting in boil kettle.   3 - HellFire™ Burners 140,000 BTU/hr at full power, 80,000 BTU/hr in efficiency mode (50% power setting). Patent pending clip-on heat shield. Infinitely adjustable kettle retaining bars accommodated kettles up to 19.75" in diameter. Non-rusting, fume free heavy gauge stainless frame.   2 - RipTide™ Brewing Pump Ultra quiet motor. Tri-Clamp disassembly for easy cleaning. Integral linear flow control valve.   2 - Tower of Power Gas Temperature Controllers PID Temperature control. On/off/auto mode selector switches. Class A precision RTD temperature sensor. Controllers are table mounted for convenience. Compact enclosure. Brushed stainless cover and gloss black powder coated case that will look beautiful for years.   Heavy Duty Custom Table 14 ga 304 stainless steel. Apron to mount accessories. Legs and lower shelf are stainless. Built-in receptacle boxes. Heavy duty casters for mobility. Adjustable height lower storage shelf. Made in USA.  

Read more less

The Pro Pilot System is a true turnkey brewhouse including virtually everything YOU need to get up and running FAST! Perfect for taprooms, pilot systems and neighborhood breweries. No fuss, no hassle, just pure pro brewing power! 3 - BoilerMaker™ Kettles Made in America. Single piece construction from US made stainless steel. Heavy gauge 304 stainless steel. Linear Flow Valve disassembles in seconds for cleaning, allows precise control of flow, and orients in any direction. Rivet free handles, rugged cool touch grips, oriented for easy carrying. Borosilicate glass level gauge. Diptube with rotating racking arm. Lifetime limited warranty on kettles. Accessories Patented button louver false bottom. AutoSparge™ automatically sets the hot liquor flow rate and liquid level in your mash tun.  Adjustable viewing angle thermometer. Whirlpool fitting in boil kettle.   3 - HellFire™ Burners 140,000 BTU/hr at full power, 80,000 BTU/hr in efficiency mode (50% power setting). Patent pending clip-on heat shield. Infinitely adjustable kettle retaining bars accommodated kettles up to 19.75" in diameter. Non-rusting, fume free heavy gauge stainless frame.   2 - RipTide™ Brewing Pump Ultra quiet motor. Tri-Clamp disassembly for easy cleaning. Integral linear flow control valve.   2 - Tower of Power Gas Temperature Controllers PID Temperature control. On/off/auto mode selector switches. Class A precision RTD temperature sensor. Controllers are table mounted for convenience. Compact enclosure. Brushed stainless cover and gloss black powder coated case that will look beautiful for years.   Heavy Duty Custom Table 14 ga 304 stainless steel. Apron to mount accessories. Legs and lower shelf are stainless. Built-in receptacle boxes. Heavy duty casters for mobility. Adjustable height lower storage shelf. Made in USA.

Read more less

The X-Dry Series Chugger Pumps offer the same quality and value, but now with "Run Dry Protection" to help avoid damage caused by cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! The Chugger pump has 3/4" MPT inlet and 1/2" MPT outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Center Inlet Pump Head Food Grade up to 250° F 3/4" MPT inlet and 1/2" MPT outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM No more issues with crossthreading plastic heads or snapping off fittings Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!

Read more less

The BrewEasy™ is a revolutionary new ultra-compact and economical all-grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short. This system is very simple to use and is a very approachable way to transition from extract to all-grain brewing. The BrewEasy™ system eliminates the need for a sparging, simplifying the process and saving time. The BrewEasy™ provides all the simplicity and speed of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the temperature ramping capability and wort clarity of a traditional RIMS system.  By eliminating the messy and hazardous lifting of hot grains found in BIAB systems you’ll find the BrewEasy to be pure brewing pleasure.  Be sure to read through our manual (see the manual tab) to get all the details of the BrewEasy™ to see why this system may be the ticket for you If you’re already a Blichmann Engineering BoilerMaker™ owner you’ll love the modularity of the BrewEasy.  Buy only the components you need and save money!  And the BrewEasy is the only system offered in electric and propane models! How does it all work? This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three tier system as well as the time consuming and somewhat complicated sparging process.  While a three tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains. The recirculation through the mash bed generates super clear wort.  And the optional BrewCommander can automate it all! What's Included? Electric Heated System 30 Gallon Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings 30 Gallon Boil Kettle BoilerMaker Kettle (with G2 valve) BoilCoil holes (in R1 location) BrewEasy kit BoilCoil and cord BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump   Gas Heated System Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings Boil Kettle BoilerMaker Kettle (with G2 valve) BrewEasy kit BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump HellFire burner   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The BrewEasy™ is a revolutionary new ultra-compact and economical all-grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short. This system is very simple to use and is a very approachable way to transition from extract to all-grain brewing. The BrewEasy™ system eliminates the need for a sparging, simplifying the process and saving time. The BrewEasy™ provides all the simplicity and speed of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the temperature ramping capability and wort clarity of a traditional RIMS system.  By eliminating the messy and hazardous lifting of hot grains found in BIAB systems you’ll find the BrewEasy to be pure brewing pleasure.  Be sure to read through our manual (see the manual tab) to get all the details of the BrewEasy™ to see why this system may be the ticket for you If you’re already a Blichmann Engineering BoilerMaker™ owner you’ll love the modularity of the BrewEasy.  Buy only the components you need and save money!  And the BrewEasy is the only system offered in electric and propane models! How does it all work? This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three tier system as well as the time consuming and somewhat complicated sparging process.  While a three tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains. The recirculation through the mash bed generates super clear wort.  And the optional BrewCommander can automate it all! What's Included? Electric Heated System 15 Gallon Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings 20 Gallon Boil Kettle BoilerMaker Kettle (with G2 valve) BoilCoil holes (in R1 location) BrewEasy kit BoilCoil and cord BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump   Gas Heated System Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings Boil Kettle BoilerMaker Kettle (with G2 valve) BrewEasy kit BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump HellFire burner Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The BrewEasy™ is a revolutionary new ultra-compact and economical all-grain brewing system. This patent pending system and process utilizes a two kettle recirculation infusion mash system called the Kettle-RIMS™ or K-RIMS™ process for short. This system is very simple to use and is a very approachable way to transition from extract to all-grain brewing. The BrewEasy™ system eliminates the need for a sparging, simplifying the process and saving time. The BrewEasy™ provides all the simplicity and speed of a traditional no-rinse brew-in-a-bag (BIAB) system, but offers the temperature ramping capability and wort clarity of a traditional RIMS system.  By eliminating the messy and hazardous lifting of hot grains found in BIAB systems you’ll find the BrewEasy to be pure brewing pleasure.  Be sure to read through our manual (see the manual tab) to get all the details of the BrewEasy™ to see why this system may be the ticket for you If you’re already a Blichmann Engineering BoilerMaker™ owner you’ll love the modularity of the BrewEasy.  Buy only the components you need and save money!  And the BrewEasy is the only system offered in electric and propane models! How does it all work? This two kettle K-RIMS™ system eliminates the hot liquor tank of a traditional three tier system as well as the time consuming and somewhat complicated sparging process.  While a three tier system is still the most versatile and efficient, the BrewEasy™ offers improved efficiency over traditional no-rinse BIAB while eliminating the lifting of hot grains. The recirculation through the mash bed generates super clear wort.  And the optional BrewCommander can automate it all! What's Included? Electric Heated System 7.5 Gallon Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings 10 Gallon Boil Kettle BoilerMaker Kettle (with G2 valve) BoilCoil holes (in R1 location) BrewEasy kit BoilCoil and cord BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump   Gas Heated System Mash Tun (top kettle) BoilerMaker Kettle (with G2 valve) AutoSparge Hole (in A2 location) False Bottom BrewEasy Lid kit Lid adapter ring AutoSparge Drain tube (from top kettle) 1/2" silicone hose (4) QuickConnector fittings (4) Hose clamps Orifice kit Temp sensor Tee fitting Hex fittings Boil Kettle BoilerMaker Kettle (with G2 valve) BrewEasy kit BrewCommander (Electric) with temp sensor and power cord RipTide Brewing pump HellFire burner   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less

The Command Stand™ offers the ultimate in brewing flexibility! It's unique, modular design gives you the ability to customize your stand with just the components you need, and add more when you want to. Every base Command Stand™ includes all the hardware needed to mount a Riptide™ Brewing Pump and BrewCommander™ Brewhouse Controller. For a complete list of compatible components check out the list below!   Plus, no mounting modifications to the stand are necessary to add on additional components later.   Base Stand features include: Conveniently mount one or two gas or electric controllers, with backwards compatibility for Tower of Power™ Controllers. Pre-Drilled mounting holes for mounting a wide selection of our brewing components. Gloss black powder coated tower and stainless-steel legs will look beautiful for years. Convenient Cable routing feature. Compatible With These Blichmann Products: Flow Control Manifold BrewCommander™ Brewhouse Controller RipTide™ Brewing Pump Therminator™ RIMS-Rocket™ HopRocket™ Power Controller Stand only, accessories not included.  

Read more less

This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. We recommend using the gauge with a range closest to your desired pressure setting. If you'd prefer a digital instant read gauge, check out the Digital Mini Pressure Gauge (for gas applications only). Pressure Range: 0-150 psi (0-10 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Note: These gauges are accurate to 10% of the whole pressure range.  (ie the 0-30psi Gauge is accurate to +/- 3psi).    KegLand Part number: KL15011  

Read more less