Commercial Cider Making Equipment

This replacement rubber seal is for the sight glass featured on MB Brite Tanks size 3.5 bbl and above.  

Read more less

Our yeast brinks give you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The 4" TC welded to the top makes inspection and cleaning a breeze. 1/4 bbl is perfect for up to a 5 bbl batch with most yeasts. The dip tube is about an inch off the bottom to help keep non-yeast solids that separate from your repitch. 1/4 bbl is perfect for up to a 5 bbl batch with most yeasts. Also available in 1/2 bbl size for up to 10 bbl batches and 1 bbl size for up to 20 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.  

Read more less

Replacement gasket for the manway on MB conical fermenters and brite tanks. Fits 5 bbl and above.  Material: EPDM  

Read more less

Replacement gasket for the manway on MB conical fermenters and brite tanks. Fits all 3.5 bbl tanks.  Material: EPDM

Read more less

2.5" DIN wrench for MB conical fermenters and brite tanks.  

Read more less

Replacement dome port tri-clamp for MB 1 bbl conicals & brite tanks.  

Read more less

Replacement dome port tri-clamp for MB 2 bbl conicals & brite tanks.  

Read more less

Replacement Foot Pad for MB 1 & 2 BBL Conical and Brite Tanks. M16x2mm threads.  

Read more less

Replacement Viton gasket for the 1 BAR PRV featured on MB conicals and brite tanks - CON4P7.

Read more less

Our yeast brinks give you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The 4" TC welded to the top makes inspection and cleaning a breeze. The dip tube is about an inch off the bottom to help keep non-yeast solids that separate from your repitch. 1 bbl is perfect for up to a 20 bbl batch with most yeasts. Also available in 1/4 bbl size for up to 5 bbl batches and 1/2 bbl size for up to 10 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT. You may also want a keg cart. This brink is the same diameter as a keg but twice the height.  

Read more less

Replacement EPDM gasket for the 1 BAR PRV featured on MB conicals and brite tanks - CON4P7.

Read more less

This clever device allows you to back fill your tank with an inert gas while cold crashing to avoid the ingress of O2 through the vacuum relief. It is normally used on a tee with a normal PRV/Vacuum Breaker. The NPT port is hooked up to a regulator and set to a low pressure. The exact setting used will depend on the volume of your head space and your regulator. Start at 2 PSI and adjust from there. A pin spanner is required for disassembly. 1.5" tri-clamp 1/2" female NPT port    

Read more less

Replacement tank manway arm for MB 3.5 bbl conical fermenter.

Read more less

Replacement tank manway locking handle for 3.5 bbl MB Conical Unitank Fermenter. Please Note: This replacement part is intended for unitanks produced after 2021. The diameter of the threads are M18.

Read more less

Replacement foot pad for MB conicals and brite tanks sized from 10 to 15 bbl.  

Read more less

Replacement foot pad for MB conicals and brite tanks sized from 20 bbl and up.  

Read more less

Replacement pipe clamp for MB conicals and brite tanks. The pipe clamp holds the dump port outlet pipe steady. Intended to be welded in place on the tank legs supporting cross bar.  

Read more less

Replacement gasket for the manway on MB conical fermenters and brite tanks. Fits all 3.5 bbl tanks. Material: Viton

Read more less

This hop port cover is intended for use with MB conical fermenters. Features a welded hook on the underside to hang bagged flavoring additions and a welded handle on top for easy removal. Made from 304 stainless steel.

Read more less

Clean and sanitize two full size kegs per 5-minute cycle Fully automated PLC controller executes every step of the cleaning, rinsing, and sanitizing process Optional hookup for steam cleaning Preset programs 1/2 bbl, 1/4 bbl and 1/6 bbl sanke kegs This fully automated keg washer will efficiently wash two kegs simultaneously, enhancing productivity and streamlining your brewing operations. The Keg Washer has two reservoirs, one is heated for caustic and the other holds sanitizer to ensure a thorough and effective cleaning process. All steps are easily configurable in the computer control unit. Those seeking an extra level of sanitization, this system comes equipped with an option to use steam for an extra level of sanitization. Features: Washes two kegs simultaneously (~5 min per cycle for 1/2 bbl kegs) 21-gallon heated Caustic reservoir 21-gallon sanitizer reservoir Size Optional steam hook up Uses compressed air to empty kegs Stainless construction Water resistant enclosures Preprogrammed Siemens PLC controller (preset for 1/2 bbl, 1/4 bbl and 1/6 bbl kegs) Easily reconfigured for custom applications 6kw heating element in the caustic reservoir. Dimensions: 43.3" L x 29.5" D x 48.3" H With Kegs Installed: 43.3" L x 40.1" D x 57" H Keg Loading Height: 35" Shipping Dimensions: 48" x L 33" W x 56" H Hook Ups: 208/220V Single Phase electrical Compressed Air CO2 Water  

Read more less

Replacement teflon pads for manway lid crossbar. 2 pcs.  

Read more less

Self-priming wine pump with variable flow control from 0 to 20 gallons per minute Flexible rubber impeller gently pushes wine Stainless steel pump head with 1.5" tri-clamp connections Remote control operation with 40 ft. long cord Stainless steel control box Stainless steel rolling cart Made in Italy by EnoItalia This unit features a stainless steel control box not pictured in the primary image. Updated images coming soon. The perfect pump for moving wine from one vessel to the other.  These Flexible Impeller Pumps are controlled by a Variable Frequency Drive, allowing for wine or juice transfers as fast as 20 gallons per minute, down to a complete stop.  A sturdy Stainless Steel cart with nylon wheels allows for easy manueverability in the winery, and a lifetime of use.  The pump can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. We worked for a year to develop this particular pump with Enoitalia of Italy.  The value and price are really amazing. So much that we stopped making our own line of Chunky Pumps at the end of 2016.  Enoitalia has been making pumps for decades and while they are excellent at destemmer crushers and other equipment, pumps are their core specialty.  We will support the pump in the USA with common spare parts but we also have the backing and support of Enoitalia if anything was to go wrong. Although the Euro 30 is self-priming, the pump should never be run dry. Stainless steel head with flexible rubber impeller Remote control with 40' cord  included VFD allows for flow rate from 0 to 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input voltage required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery The pump is reversible and can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. Please Note: This pump will NOT come with fittings.   It will have 1.5" Tri Clamp ferrules, and the appropriate fittings can be chosen from YMANs below.

Read more less

Self-priming must pump with variable flow control from 0 to 100 gallons per minute Flexible rubber impeller gently pushes must and wine Stainless steel pump head with 3" tri-clamp connections Remote control operation with 30 ft. long cord Stainless steel control box Stainless steel rolling cart Made in Italy by EnoItalia This unit features a stainless steel control box not pictured in the primary image. Updated images coming soon. The Euro 60 Flexible Impeller pump is a 3" T.C. self-priming pump with a Stainless Steel head, controlled via a frequency inverter that allows for flow control from 0 - 100 gal / minute.  These units can be controlled via the remote control on a 30' cord, or from the control panel mounted on the pump itself.  Pumps are reversible, self-priming up to 15', and can be used with wine, juice, or must. The wheeled pump cart allows for easy movement and maneuverability around the winery or crushpad, and stainless steel construction insures that it'll survive through hectic wine seasons!  Completely food grade components have no impact on the quality of the wine, and a low shear value due to the larger TC fittings. This pump is a true all around winery pump because it can be used with must and wine. If you have a commercial crush pad with a larger destemmer crusher like a Jolly40 or above, and you process small berries, you will want to consider the Gamma 80 as it works better with dry fruit (lots of skin and not as much flesh).  However the Euro60 works well with most musts and then can be your work horse to move must and wine in the winery, making it a great value you can use year around. Although the Euro 60 is self-priming, the pump should never be run dry. Features: Stainless steel head with flexible rubber impeller Gear reduction for increased low speed torque Stainless steel cart Remote control  Flow rate from 0 to 100 gpm Flow is reversible Max Pressure: 33 PSI (2.3 BAR) 3" Tri-Clover inlet and outlet 4KW/5.3HP motor Will work with 208v or 230v Single Phase Power 14 amp draw Recommended temperature range: 40 - 150°F (5 - 65°C) Made by Enoitalia of Europe Please note: the unit will arrive with a bare power cord. You will need an electrician to wire the appropriate plug.  

Read more less

The Delta Zero comes standard with 6 mm diameter holes, which is perfect for most plums, apricots and peaches. Alternate baskets with various hole sizes are also available, allowing the destoner to be used with a wide range of produce. Reference the chart below for the recommended hole size to suit your needs. Some fruit have multiple recommendations dependent on how large or small the fruit is. Diameter Recommended Use 0.6 mm Berries, apples, pomegranates, strawberries 0.8 mm Berries, apples, pomegranates, strawberries 1.2 mm Tomatoes 1.5 mm Tomatoes 2 mm Olives 3 mm Cherries 6 mm Plums, apricots, small peaches 8 mm Peaches    

Read more less