Pro Tank Parts & Accessories

Sanitary sample valve ideal for active fermentations as it has no pockets to trap fermenting wort Easy twist-to-open handle is much easier to operate than standard plunger style sample valves Disassembles quickly for cleaning between uses Direct replacement for MB conical fermenters & brite tanks and compatible with any fermenter with 1.5" T.C. port Nozzle mount for use with a pigtail sample coil to pour samples of carbonated beer Look no further, this is a perfectly engineered 1.5" TC sample valve! With an easy twist to open handle and quick diassembly, this valve provides ease and convenience. Can be used on any fermenters 1.5" TC port. This 304 stainless steel valve is perfect for active fermentations. It has no pockets to trap fermenting wort. It is very easy to disassemble and clean. It features a mount for a pigtail or a CO2 checker. This is the recommended replacement sample valve for MB conical fermenters and brite tanks.

Read more less

2" tri-clamp pressure relief valve. Calibrated to blow off at 2 BAR or 29 PSI.

Read more less

Single station manual keg filler assembly makes a simple solution for small volume keg filling runs Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg Easily fill Sanke kegs with the MB Keg Filler. Simply connect to your brite tank and purge with beer. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full. Stainless Steel D-style sanke couplers Reinforced silicone tubing on beer side Clear vinyl tubing on gas side    

Read more less

CIP Spray Ball arm with 1.5" tri-clamp fittings. Designed for use with MB 1 & 2 BBL conical fermenters and brite tanks.

Read more less

Direct replacement gasket for the 1.5" butterfly valve featured on MB conicals and brite tanks. Material: Silicone

Read more less

Butterfly valves have the distinct advantage over ball valves in that they won't trap wort inside. They are the most sanitary valve you can ask for and are easy to clean in place. 2" tri-clamp. These valves are a direct replacement of the butteryfly valves that come on MB conical fermenters and brite tanks.

Read more less

This is the modern copy of the old 1/4" Turn Valves (Zwickle). It has a ledge to attach a pigtail or a CO2 checker. The valve is designed to clean in place as long as the valve remains open for the cleaning cycle. Note: The valve has a small pocket in the moving part that traps wort when closed so we don't recomend these for active fermentations. This is a replacement option for the sample valve for MB conical fermenters and brite tanks.

Read more less

Make quick work of transferring finished beer from fermenter to kegs with the easy-to-operate four station manual keg filler Optional Keg Filling FOBs stop flow automatically once the keg is full, eliminating waste and making it even easier for a single person to operate the filler Sight glass at the inlet allows you to monitor beer flow from the fermenter—check if you're pulling yeast or breaking CO2 out of solution Elevated sample port for purging air from the system before filling runs Made from high-quality Stainless Steel tri-clamp fittings, custom-welded stand, and reinforced silicone tubing Shorten the time it takes to do your least favorite task with the MB Keg Filler. Our Keg Filler was designed by renowned brewmaster Colin Kaminski to make filling kegs a simple process that can be completed quickly. Connect your tank to the keg filler via the 1.5" butterfly valve inlet, which will enable you to shut off flow if you run into any issues. Monitor flow with the sight glass to see if you're pulling yeast, if there's air present in the system, or if CO2 is breaking out of solution because you're filling too quickly. The highest point in the filler is a plunger-style sample valve sitting at the opposite end, allowing you purge air out of the system and minimize oxidation. The high-quality stainless steel keg couplers have had the check valves removed so beer and CO2 can flow backwards when needed. Reinforced silicone tubing on the beer-out side offers more protection when cleaning and sanitizing the system with hot solution. Clear vinyl on the gas-out side operates as a sight glass to let you know what's happening in the keg—foam in the tubing indicates you're filling too quickly, while beer in the tubing indicates the keg is full. The Manual Keg Filler is available with or without a Keg Filler FOB on each filling line. See the instructions below for operating the keg filling FOBs. 4-Head Keg Filling Station Stainless Steel D-style sanke couplers Reinforced silicone tubing on beer side Clear vinyl tubing on gas side Custom-welded compact stainless steel stand

Read more less

Replacement cup gasket is for the ForgeFit® Sanitary Sample Valve. This is the recommended replacement part for the sample valve on MB conical fermenters and brite tanks. Material: EPDM  

Read more less

Replacement blue ball handle for butterfly valves on MB conical fermenters and brite tanks.

Read more less

2" tri-clamp pressure relief valve. Calibrated to blow off at 1.5 BAR or 21.75 PSI.

Read more less

Replacement 1.5" tri-clamp gasket for MB Pro conical fermenters and brite tanks. Material: Silicone

Read more less

Tanking samples of carbonated beer from carbonated tanks oftern results in a foamy mess. A pigtail sampling coil provides the necessary restriction in order to pour a clean, accurate sample. This sample valve accessory is perfect for taste testing for proper carbonation levels and dry hop status. Compatible with the MB 1/4-Turn Sample Valve and the ForgeFit® Sanitary Sample Valve.  

Read more less

Replacement racking arm for 30 bbl MB conical fermenters. DIN 65 with 1.5" racking pipe.

Read more less

Our yeast brinks give you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The 4" TC welded to the top makes inspection and cleaning a breeze. The dip tube is about an inch off the bottom to help keep non-yeast solids that separate from your repitch. 1/2 bbl is perfect for up to a 10 bbl batch with most yeasts. Also available in 1/4 bbl size for up to 5 bbl batches and 1 bbl size for up to 20 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.  

Read more less

Replacement gasket for the manway on MB conical fermenters and brite tanks. Fits all 3.5 bbl tanks. Material: Silicone

Read more less

Direct replacement gasket for the 2" butterfly valve featured on MB conicals and brite tanks. Material: EPDM

Read more less

This Reactor Rod was custom built to be used with the 2 bbl MB Conical Fermenter, but can easily be integrated to other vessels with a 4" tri-clamp top port. Unlike other in-solution cooling coils on the market, the Reactor Rod utilizes a straight vertical design. Without all the curves and bends of a cooling coil, it is easier to scrub and sanitize the unit prior to setup and after use. The four cooling rods are 41" long measured from the bottom of the T.C. fitting.

Read more less

Replacement CIP spray ball for MB conical fermenters and brite tanks. 63 mm diameter 1.5" tri-clamp connection

Read more less