Distilling Equipment & Accessories

Eliminate oxidation in your bottling process with the XF460HP volume-based filling system Made specifically for high proof spirits, featuring components with better resistance to high concentrations of ethanol Liquid is pulled from your barrel or storage tank by the built-in self-priming pump Filling volume is programmed and stops automatically Optional gas flush system Made to order in the United States Eliminate oxidation in your bottling process by using the XpressFill volume-based filling system! The XF460HP four bottle filler is now available specifically for High Proof Spirits. Susceptible components have been replaced with material more resistant to higher concentrations of ethanol.  The XF460HP can easily accommodate very small to very large bottles with its adjustable shelf, allowing great flexibility.  Easy to use, compact in design, precise volume filling, high quality components, hand-crafted in the USA. Gravity-based systems usually involve spirits being transferred to a holding tank, and unless your bottles and holding tank are pre-flushed with inert gas, some degree of oxidation is inevitable. Xpress Fill bottling systems have a closed pathway with a self-priming pump. They also have as an optional built-in sparging (pre-flushing) system that uses Nitrogen or Argon to pre-flush your bottles. To use, place four bottles under the filling spouts, push the gas button (optional at additional cost) to flush the bottles with inert gas. Then hit the Fill button which pulls the spirit from your barrel or stainless storage tank, distributes 750ml of spirit to each bottle, and shuts off automatically when done. It is truly that simple. Each fill cycle lasts 20 seconds. When using 750ml bottles you can expect to fill about 450 bottles per hour. There is also a manual mode allowing you to top up bottles or fill odd size bottles. The four spout filler features a 3/8" inlet. Features: Made to order in the USA 4 Spout fills approximately 250 bottles per hour Bottle shelf is adjustable to accommodate a wide range of bottles Optional Gas Flush System & Filler to automatically gas-purge bottles prior to filling Weight: 32 lbs Dimensions: 16" W x 17" H x 14.75" D Warning: XpressFill bottle fillers are NOT certified as explosion proof, should be used in a well-ventilated area, and not for use with solvents. It should be noted that 70% alcohol is 140 proof and has a flash point of 70°F, making the product volatile, as well as flammable

Read more less

Designed to offer a sturdy connection point when using medium-heavy stills or off-center steam condenser units. To attach an AlcoEngine Still Top, remove the locking ring and gasket, replace the gasket with this single sided bead seal, pass the bottom threaded portion of the still through the ferrule, and secure in place with a 2" tri-clamp. Sized for 35L BrewZillas and DigiBoils. Compatible with the AlcoEngine Copper Pot Still and Copper Reflux Still and the BrewZilla Steam Condenser. Installing AlcoEngine Still: Remove the bottom nut and seal from the column Place the single sided bead seal on the lid's tri-clamp ferrule (beaded side facing down) Pass the threaded bottom section of the column through the ferrule Secure in place with a 2" tri-clamp The column's bottom nut and seal are not needed KegLand Part Number: KL32629

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Upgrade your Still Spirits Air Still with the Air Still Pro Head Unit. Get all the benefits of the Air Still Pro and eliminate the need to purchase a new tabletop system. Craft high-quality light and dark spirits using the Air Still Pro Head Unit and your Still Spirits Air Still boiler. With a multi-purpose condenser and interchangeable distillation tips, the Air Still Pro Head Unit enables you to produce clean, neutral spirits at up to 90% ABV in reflux mode and flavorsome and botanical-infused spirits at up to 80% ABV in the pot still mode.  An automated foreshots collection vial captures the first 30 ml of distillate, allowing you to discard foreshots easily. This advanced feature improves safety and saves extra steps in the distilling process. In addition, other reflux stills may require an input cooling source, such as water, but the Air Still Pro column cools itself. The Air Still Pro Head Unit is easy to use and compatible with the Still Spirits Air Still Boiler.  Please note: The Air Still Pro Head Unit warranty is void if used with any boiler that is not provided with the Still Spirits Air Still or Air Still Pro. Features: Yield: 2.4 qt of 40% ABV alcohol per 2.1 Gal wash  Pot Still mode: Distills at 80% ABV (160 proof) before diluting to 40% ABV (80 proof) Reflux Still mode: Distills at 90% ABV (180 proof) before diluting to 40% ABV (80 proof) Dimensions: 12.5" (h) x 18.1" (w) x 19.6" (d) Weight: 7.9 lbs Power: 110V Manufacturer's Warranty: 3 years Included: Air Still Pro Head Unit with a pre-packed reflux column Botanical basket 2x glass foreshots collection vials Easy-swap distillation tips for reflux and pot still modes Distillation tip spanner Starter guide

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Distilling at home should be fun and easy. That's why we've packed all the beginner distilling essentials into one easy-to-use kit. The Air Still Essentials Distillation Kit enables you to prepare and ferment your wash, collect distillate, dilute, filter, and flavor your neutral spirit with various Top Shelf Flavorings. Kit Contains: Equipment 12 L (3.2 US Gal) Fermenter with Stick-On Thermometer Carbon Filter & Collection System Mixing Spoon Ceramic Boil Enhancers Hydrometer Alcometer and Test Tube Wash Ingredients & Consumables 1 x sachet Pure Turbo Yeast Nutrient (78g) 1 x sachet Turbo Clear (65g) 1 x sachet Turbo Carbon (54g) 1 x sachet Pure Turbo Yeast (10g) 2 x 2.6 lb Dextrose 1.7 fl oz Distilling Conditioner 3 x 1.7 fl oz Top Shelf Flavorings Note: The Air Still Essentials Distillation Kit does not include the Air Still or the Air Still Pro.

Read more less

Compatible with 65L BrewZillas and DigiBoils. Designed to be extremely sturdy when using heavier 4" stills or off-center steam condenser units. With a 2" x 4" T.C. reducer, the lid pairs perfectly with AlcoEngine Still Tops or the BrewZilla Steam Condenser Set. (The AlcoEngine Still Tops will need this single sided bead seal for a secure tri-clamp connection.) The PPSU sight glass allows you to watch your wort or wash boil and keep an eye on foaming issues. For brewing with the Steam Condenser Set, the sight glass is easily removed for adding hops or other boil additions. (Use gloves, it will be hot!) PPSU is an excellent choice for components that are exposed to high temperatures (up to 392°F / 200°C) and corrosive media due to its exceptional chemical resistance. As well as being extremely impact resistant. KegLand decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. Intricate parts can be injection molded that would have been near impossible to do with stainless steel or lab-grade glass. Specs: 4" T.C. top ferrule port 3" T.C. sight glass ferrule Lid handles with molded grips Thicker silicone lid gasket for a tighter seal Includes: 3" PPSU sight glass disc 3" tri-clamp 3" silicone tri-clamp gasket Silicone lid gasket KegLand Part Number: KL25829

Read more less

In How to Distill, you'll learn every aspect of home distilling, from the fundamentals to controlling flavor development to packaging.   Whether you want straightforward information for your first distillation or you’re a home distiller looking to learn more and perfect your craft, you’ve come to the right place. In this book, certified industry expert and knowledgeable home distiller Aaron Hyde lays out the how and why of all the key processes, starting at the mash and fermentation, through distilling, and ending with expert information on aging and blending spirits. You’ll find: An Overview of Distilling and the Process: The fundamentals of distillation, concise distillation theory, still design, distilled products, and ingredients are all covered. Pre-Distillation: Move on to learn about the fermentation process, making your own wash from sugar or cereal mashing grain. Distilling: The main event! A robust section on distilling covers modern distillation techniques, the distillation process, key decisions during distillation, process control, collection, and further distillation runs. Post-Distillation: Work your way through flavor development and control, polishing spirit, the aging process, quality considerations, blending, and packaging considerations. Recipes: Whether you're interested in making bourbon whiskey, scotch whisky, gin, rum, or vodka, you’ll find an easy-to-follow recipe. With reliable, tested information throughout, this is the new standard for distilling.

Read more less

This pot still design has been created to allow the delicate compounds that form the complex structure of many whiskeys and gins. This iconic V-shape helps to capture the vital esters, aldehydes and phenolic compounds that are necessary to give the final spirit a complexity that simply cannot be created any other way. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top. Comes with 13 mm (0.51") barb connections for the water inlet and outlet.   Kegland Part number: KL16155

Read more less

These plastic quick disconnects are intended for use with the QD inlet and outlets found on the Copper Pot Still and Copper Reflux Still (DS120 & DS130). Use with 7/16" ID Vinyl Tubing (R322) or 1/2" ID Vinyl Tubing (R330).    

Read more less

This complete still kit comes with the 35L DigiBoil Electric Kettle and the Copper Reflux Still Condenser. 35L DigiBoil Gen 2 (110V or 220V) Copper Reflux Still Condenser w/ Barb Connections 13 mm Inlet/Outlet Barbs (0.51 in.) Distillation Lid & Gasket Set of Adjustable Lid Clamps Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).   

Read more less

The newest edition of The Art of Distilling - Revised & Updated! This book is a backstage pass into the world of small-scale distilling of whiskies, gins, vodkas, brandies, and more. The reader, the ultimate spirits aficionado, will learn how water and grain are transformed into the full range exquisite, timeless liquors. There are few books available that explore the actual craft of distilling in such detail. Most of the other spirits books chronicle the historical side of the distilling world or focus on the flavors of various vintages. Our book will be the consummate insider's guide to distilling techniques. Bill Owens' original photography, the result of two cross-country road trips, offers comprehensive illustration of the microdistilling world.

Read more less

Replacement 6mm thick gasket for the 65L Distillation Lid. Note: This 6mm gasket offers an improved fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL32667

Read more less

Maximize the purity of your distillate with high density spiral prismatic packing Prismatic spiral shape designed to maximize surface area One 500g bag is suitable for filling one 10" long 2" tri-clamp extension tube Take you distillation to the next level with super high density spiral prismatic packing. The packing maximizes the purity of the collected distillate from your reflux still, ensuring the best possible product is collected. The prismatic spiral shape is designed to maximize its surface area helping to separate out fractions in your reflux, resulting in a highly pure and neutral end product. It is not recommended for use with pot stills when producing flavored spirits. Standard spiral prismatic packing is recommended for home-sized columns like the AlcoEngine series. Large size packing is recommended for 4" diameter or larger columns. Note: We recommend soaking and washing the SPP before its first use with a 50:50 mix of vinegar or citric acid and warm to hot water to remove all manufacturing oils. Sizing: The SPP is approximately 3.35mm x 3.45mm. Suitable to fill a 10” x 2” T.C. Extension Tube. One 500g bag of SPP is enough to fill approximately 500 mL (16.9 oz) of volume. The HETP (Height Equivalent to a Theoretical Plate) for this packing is approximately 30mm. That is roughly 33 theoretical plates per meter. KegLand Part Number: KL25706

Read more less

Digital temperature control Triple heating element control (2000w, 1000w and 500w) 17 gallon total capacity 304 stainless steel construction 220V / 20A power This is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 10-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle! The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun! This DigiBoil model has three built-in heating elements that run off a 220V plug. The elements are 2000w, 1000w and 500w for a combined 3500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage all three elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).  Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired. More! Features: NEMA 6-30R plug (4.5 ft. cord) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both the +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130 & DS120)* External Dimensions: 29" H x 19.5" W (including handles) Internal Dimensions: 20.25" H x 15.75" W ETL Listed *Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid (DS127). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. MoreBeer! is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).   Kegland Part number: KL07313 NOTE: Due to the size of this item, it is not eligible for international shipping.    

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. Integrated Pump and Float Valve: Enjoy automated and precise water flow with a built-in pump and float valve that prevents overflow. Adjustable Flow Control: Fine-tune your distillation process with a simple, ergonomic handle that provides precise control over water flow. Easy-to-Use Setup: Get started quickly with reliable push-fit connections and a direct tap connection that fits right into your system. The Create+ Water Flow Regulator is designed for use with reflux distilling systems like the T500, this regulator ensures a steady, controlled water flow for consistent, high-quality results. It features an easy tap connection, built-in water pump, float valve to prevent overflow, and an adjustable flow control handle for precise operation. Compatible with the T500 & similar cooling management reflux systems Ergonomic flow controller for easy adjustments Stable water flow for high quality distillate Built in pump to supply water to your system A float valve to regulate water capacity Reservoir to store up to 1 L of water Reliable push-fit connections DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. What's Included Create+ Water Flow Regulator with pump Flow Control Handle Inlet Hose Push-fit Connection Push-fit to Thread Adapter (for use with Tap Adapters provided with T500) Power Cable and Adapter Instructions Specifications This Water Flow Regulator can be used with any still that requires less than 1.8 L per min (1.9 US qt per min) of cooling water 3 year manufacturer's warranty    

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. Easily connect your existing Still Spirits Alembic or T500 distilling equipment to 2" tri-clamp accessories. Converts a DN40 (1 ½" BSPP) threaded connection to a 2" tri-clamp connection. A simple way to expand your distilling setup without needing to replace existing equipment. Convert a threaded connection to a 2" tri-clamp connection with ease. The Create+ Threaded Adapter Set converts a DN40 (or 1 ½ " BSPP) threaded connection to a 2" tri-clamp connection, allowing you to connect your existing Still Spirits Alembic or T500 distilling setup to 2"tri-clamp accessories. Refer to instructions for information on how to convert your specific equipment. DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. Key Features Convert from DN40 (or 1 ½ " BSPP) threaded connection to 2" tri-clamp connection Connect to 2" tri-clamp distilling accessories 304 grade stainless steel construction High temperature resistant food grade silicone Specifications Dimensions: 3.14" x 3.14" x 2.55" Weight: ~0.88 lbs Approx. NOTE: The Threaded Adapter Set is designed primarily for small to medium-sized distilling setups that do not have heavy, off-center attachments. When used with the Still Spirits Boiler 25 L lid or Alembic Dome, it is reasonably flexible and is sturdy enough to fit components within the following specifications: A total column & condenser height up to 1.1 m (3.6 ft) from the boiler lid or dome. A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg lbs) off-center weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6") to the main column. NOTE: The Create + Threaded Adapter Set is only suitable for use with Still Spirits Alembic Copper Condensers sold from 2019 onwards. Included in Box DN40 Nut Sieved Gasket Silicone Gasket 2" Tri-Clamp to DN40 Threaded Adapter

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. High-Performance Distillation: This all-in-one reflux column and condenser features pre-packed copper and stainless-steel saddles to produce up to 93% ABV neutral alcohol and exceptionally pure distillate. Simple and Versatile: The single-unit design simplifies the distillation process, while the 2" tri-clamp connection allows you to easily attach it to other equipment and accessories. Built to Last: Crafted from durable 304-grade stainless steel, the T500 is resistant to corrosion, ensuring long-lasting performance and reliability. Multi-Use Functionality: Ideal for distilling neutral alcohol, water, and other spirits, the T500 is a perfect fit for both new and experienced distillers. Engineered for simplicity and efficiency, the Create+ T500 Column & Condenser is a high-performance reflux column and condenser that produces exceptionally clean distillate. This all-in-one apparatus eliminates the need for separate components, simplifying the distillation process without compromising on performance. However, its 2" tri-clamp connection allows for it to be connected to 2" tri-clamp accessories, so you have the option to experiment with different setups and attachments. The T500 features a cutting-edge design that incorporates pre-packed copper and stainless-steel saddles. This innovative amalgamation ensures optimal vapor reflux, facilitating the production of superior-quality distillate. Ideal for both novice and experienced distillers, the T500 redefines convenience in home distillation, delivering unmatched results with a seamless blend of form and function. Crafted from the highest quality materials, the T500 is constructed with precision using 304-grade stainless steel, elevating its durability and performance to unmatched levels. The choice of 304-grade stainless steel speaks to the T500’s commitment to longevity and corrosion resistance, ensuring a robust and reliable distillation apparatus. The T500 is perfect for distilling water due to the column’s stainless steel and copper saddles. These saddles allow for greater removal of impurities from the water compared to other forms of water distillation. See our instructions for distilling water for more information. Perfect for crafting clean neutral alcohol, this innovative unit ensures precision in alcohol separation, producing alcohol of exceptional clarity and purity. The T500 will produce alcohol of up to 93% ABV and extract 95% of the alcohol in your wash. This neutral alcohol makes a great vodka and is the perfect neutral alcohol base for flavorings or making gins and other botanical spirits. The T500 is ideal for use with the Create+ Boiler 25 L, as well as the Grainfather G30, G40, and G70 Brewing Systems. DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. Key Features All-in-one reflux column and condenser For intermediate-advanced distilling Suitable for distilling water and alcohol Designed in New Zealand 304 Grade stainless steel 2" Tri-clamp connection Packed with stainless steel and copper saddles Faucet adaptor for ease of cooling water connection Ideal for use with the Create+ Boiler 25 L, as well as the Grainfather G30, G40, and G70 Brewing Systems. Specifications Dimensions: H 27.1" x W 3.3" x D 6.2" Weight: 6.21 lbs Ease of Use: Intermediate Average water use during distillation: You will use approx. 200 L (54 US Gal) per 25 L distillation.* Yield: 8 L (2.1 US Gal) of 40% ABV alcohol per 25 L (6.6 US Gal) wash (based on using the standard recipe of 6 kg (13.2 lb) of sugar** Purity: Distills at up to 93% ABV (186 US proof) before diluting to 40% ABV (80 US proof)** * When used with the Create+ Water Flow Regulator. **Per 25 L (6.6 US Gal) Turbo Classic 8 Production pack wash using the Create+ Boiler 25 L and T500 Reflux Condenser. Included in Box Create+ T500 Column & Condenser Create+ 2" Tri-Clamp Copper and Stainless Steel Saddles (Pre-Packed) Digital Thermometer 2x Cooling Water Tues Ceramic Boil Enhancers Tap Adapter Flow Controller with Kitchen and Garden Tap Adapters Instructions

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. Versatile Distilling System: Easily converts the Create+ Boiler 25 L or Grainfather G30 into an alembic system, allowing you to craft high-quality distilled water, hydrosols, and a variety of spirits. Flavor-Enhancing Condenser: Unlike a reflux condenser, the alembic condenser is designed to retain and enhance the flavors and aromas of your wash, perfect for creating rich, characterful spirits like whiskey, rum, and gin. Customizable Setup: Features a 2" tri-clamp connection for easy integration with other accessories, enabling you to experiment with different setups and attachments for a truly unique distilling experience. Craft high quality distilled water, hydrosols, and flavorsome spirits by transforming the Create+ Boiler 25 L or Grainfather G30 into an alembic distilling system by adding the Create+ Alembic Copper Dome and condenser.* Unlike a reflux condenser, the Alembic Condenser retains and enhances the flavors and aromas from a wash, making it ideal for crafting spirits like whiskey, bourbon, rum, and gin. The Alembic Copper Condenser features a 2" tri-clamp connection allowing for it to be connected to 2" tri-clamp accessories, giving you the option to experiment with different setups and attachments for a truly bespoke experience. The Alembic Condenser is also compatible with the Grainfather Alembic Condenser Attachment Kit and Distilling Lid*, it can convert a G40 or G70 into a Pot Still, making it suitable for distilling larger batches of all-grain spirits. *Create+ Alembic Copper Dome, Create+ Boiler 25 L, Grainfather G30, and Grainfather Distilling Lid and Attachment Kit sold separately.  DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities.  Key Features For intermediate-advanced distilling Made from Copper Designed in New Zealand Connects to 2" tri-clamp distilling accessories Suitable for distilling water, hydrosols, and flavorful spirits Kitchen, laundry and garden tap adapters for ease of cooling water connection Specifications Ease of Use: Intermediate to advanced Average water use during distillation: You will use approx. 150 L (39 US Gal) per hour.* Approx Yield: 3.5-7 L (0.9-1.8 US Gal) of 40% ABV alcohol* Purity: Distills at up to 70% ABV (140 US proof)* *Per 25 L (6.6 US Gal) wash (varies based on wash ingredients/volume) using the Create+ Boiler 25 L and Create+ Alembic Copper Dome. Included in Box Create+ Alembic Copper Condenser Create+ 2" Tri-Clamp (includes silicone gasket) Digital Thermometer with mounting bracket 2 x Cooling Water Tubes Silicone Distillate Tube Kitchen, Garden and Laundry Tap Adapters Instructions  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. Superior Spirit Quality: The copper construction and domed shape of the Alembic Copper Dome captures and enhances the flavors and aromas from a wash, while stripping away unwanted compounds and off-flavors to create smooth, high-quality spirits. Versatile Distilling: Transform your Create+ Boiler 25 L or Grainfather G30 into a distilling system for crafting whiskey, bourbon, gin, rum, and more. Adaptable Design: The included 2" tri-clamp to DN40 Threaded Adapter provides flexibility for connecting to various attachments and setups, allowing you to experiment with your distilling process. Easy to Use: Seamlessly integrates with the Create+ Alembic Condenser, making it simple to upgrade your current brewing system. Craft high quality distilled water, hydrosols, and flavorsome spirits by transforming the Create+ Boiler 25 L or Grainfather G30 into an alembic distilling system by adding the Create+ Alembic Copper Dome and condenser.* Due to its copper construction and domed shape, when paired with the Alembic Condenser the Alembic Copper Dome captures and enhances the flavors and aromas from a wash, making it ideal for crafting spirits like whiskey, bourbon, rum, and gin. It is able to strip away unwanted compounds and off-flavors, improving distillate quality. The Alembic Copper Dome comes with a 2" tri-clamp to DN40 Threaded Adapter allowing for it to be connected to 2" tri-clamp accessories, giving you the option to experiment with different setups and attachments for a truly bespoke experience. This adapter can be removed from the dome for use with older model threaded Still Spirits condensers. *Create+ Alembic Copper Condenser, Create+ Boiler 25 L, and Grainfather G30 sold separately. DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. Key Features For intermediate-advanced distilling Made from Copper Designed in New Zealand Connects to 2" tri-clamp distilling accessories Suitable for distilling water, hydrosols, and flavourful spirits Warranty Period: 3 Years Specifications Ease of Use: Intermediate to advanced Average water use during distillation: You will use approx. 150 L (39 US Gal) per hour.* Approx Yield: 3.5-7 L (0.9-1.8 US Gal) of 40% ABV alcohol* Purity: Distills at up to 70% ABV (140 US proof)* *Per 25 L (6.6 US Gal) wash (varies based on wash ingredients/volume) using the Create+ Boiler 25 L and Create+ Alembic Condenser.   Included in Box Create+ Alembic Copper Dome 2" Tri-Clamp to DN40 Threaded Adapter (includes silicone gasket and DN40 Nut) Instructions

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. All-in-One Design: This integrated unit combines a reflux column and condenser, simplifying the distillation process and eliminating the need for separate components. Superior Distillate Quality: Pre-packed with a mix of copper and stainless steel saddles, the T500 Pro improves vapor reflux and reduces unwanted compounds, producing high-purity alcohol up to 93% ABV. Advanced Temperature Control: A built-in thermowell and a beeping alarm thermometer with customizable high and low-temperature alerts ensure precise vapor temperature monitoring. Improved Water Efficiency: The redesigned condenser saves up to 30% more water compared to the original T500, making each run more efficient. Engineered for modularity and performance, the T500 Pro is an all-in-one reflux column and condenser designed to streamline the distillation process while delivering exceptional results. This innovative unit combines advanced functionality with unmatched convenience, eliminating the need for separate components. Its integrated design features a pre-packed column with both copper and stainless steel saddles, optimizing vapor reflux and elevating the quality of your distillate. Constructed from the highest quality materials, the T500 Pro is crafted with precision using T2-grade copper for the column and cold finger coil, complemented by durable stainless steel tri-clamp ferrules. The use of copper in the spirit path enhances the distillation process by reducing unwanted compounds, ensuring a cleaner, smoother finish. Food-grade, high-temperature silicone seals are included for use in the tri-clamp connections. The T500 Pro features a thermowell at the top of the column for accurate vapor temperature monitoring, a beeping alarm thermometer with adjustable high and low temperature alerts, and robust 2” tri-clamp fittings for a secure, modular setup. The detachable product condenser and removable cold finger cooling coil offer added versatility, while improved water efficiency saves up to 30% compared to the original T500, depending on usage. Ideal for producing clean, neutral alcohol, the T500 Pro delivers exceptional clarity and purity in every run. It can reach up to 93% ABV and recover up to 95% of the alcohol from your wash—producing a neutral spirit that’s ideal for vodka or as a base for flavorings, gins, and other botanical spirits. The T500 Pro is perfect for distilling water, thanks to the combined performance of copper and stainless steel saddles, which aid in the effective removal of impurities.  The T500 Pro is compatible with the Create+ Boiler 25 L and the Grainfather G30, G40, and G70 Brewing Systems, making it a powerful and flexible addition to any distiller’s setup. DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. Key Features All-in-one reflux column and condenser Suitable for distilling water and alcohol Constructed from high-quality T2-grade copper with stainless steel tri-clamp ferrules Designed in New Zealand Pre-packed with copper (105 g) and stainless steel saddles (485 g) 2" tri-clamp connections Integrated thermowell in the column head for accurate vapor temperature readings Beeping alarm thermometer with adjustable high/low temperature alerts Removable cold finger cooling coil and detachable product condenser No plastic components in the spirit path Food-grade silicone seals Saves up to 30% water compared to the original T500 (depending on usage) Compatible with Create+ Boiler 25 L, and Grainfather G30, G40, and G70 Brewing Systems Specifications Dimensions: H 26.6" x W 4.7" x D 4.2" Weight: 5.79 lbs Warranty: 3 years Ease of Use: Intermediate Average water use during distillation: You will use approx. 140 L (37 US Gal) per 25 L distillation.* Yield: 8 L (2.1 US Gal) of 40% ABV alcohol per 25 L (6.6 US Gal) wash (based on using the standard recipe of 8 kg (17.6 lb) of sugar** Purity: Distills at up to 93% ABV (186 US proof) before diluting to 40% ABV (80 US proof)** * When used with the Create+ Water Flow Regulator.   **Per 25 L (6.6 US Gal) Turbo Classic 8 Production pack wash using the Create+ Boiler 25 L and T500 Pro Column & Condenser.   Included in the Box Create+ T500 Pro Column & Condenser 2x Create+ 2" Tri-Clamps Copper and Stainless Steel Saddles (Pre-Packed) Create+ Beeping Alarm Thermometer with 2" Mounting Bracket 2x Cooling Water Tubes Ceramic Boil Enhancers Tap Adapter Flow Controller with Kitchen and Garden Tap Adapters Instructions  

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible. Versatile Functionality: The Create+ Boiler is compatible with two different distillation columns. Pair it with the Create+ T500 Column & Condenser to produce high ABV neutral spirits like vodka, or use it with the Create+ Alembic Copper Dome & Condenser for flavorful spirits such as whiskey and gin. Precise Power Control: With two power switches, you can choose between 1600W and 1100W. This allows for a more gentle and controlled boil, which is ideal for crafting more delicate spirits while preserving their unique flavors and aromas. Expandable Design: An included 2" Tri-Clamp to DN40 Threaded Adapter allows you to connect a wide variety of 2" tri-clamp accessories, providing the flexibility to experiment with different setups and attachments. The Create+ Boiler 25 L is the recommended boiler base for use with the Create+ T500 Column & Condenser and the Create+ Alembic Copper Dome & Condenser. With a maximum capacity of 25 liters, the Create+ Boiler is designed for distillers seeking precise control and versatile functionality. When paired with the Create+ T500, it can produce high-quality and high ABV neutral alcohol (vodka) or distilled water. When paired with the Create+ Alembic Copper Dome & Condenser it can create flavorsome spirits (gin, whiskey, rum and bourbon) and aromatic hydrosols, retaining delicate flavors and aroma from your wash or botanicals. The Create+ Boiler 25 L includes a 2" Tri-Clamp to DN40 Threaded Adapter allowing for connection to 2" tri-clamp accessories, so you can experiment with different setups and attachments. It features two power switches. When both switches are on, the element will be supplied full power (1600W for 120V units). You can lower this to 1100W by switching off the 500W switch (120V unit). This is ideal for maintaining a gentler boil during distillation, especially for dark spirits like whiskey, rum, and bourbon. For safety during operation the boiler features an automatic reset switch. The stainless-steel ball valve tap provides durability and ease of use when discarding your contents after distillation. Elevate your distillation experience with the Create+ Boiler 25 L, designed for flexibility, precision, and superior results across a range of applications. Whether you’re crafting spirits, distilling water, or producing hydrosols, the T500 Boiler offers the control and performance you need. DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities. Key Features Dual element control switches provide more control during distillation - when both switches are in the ON position, the element will be supplied full power of 2200W (1600 if using a US/CA unit). When one switch is in the OFF position, it will only consume 1100W (or 1100W/500W if using a US/CA unit) of power. Designed in New Zealand Boil dry reset Thermal cut out fuse Waste discharge tap with a stainless-steel ball valve Boiler lid with 48 mm opening 25 L Boiler capacity Connects to 2" tri-clamp distilling accessories 304 grade stainless steel construction High temperature resistant food grade silicone Specifications Capacity: 25 L (6.6 Gallons) Dimensions: H 64 cm x W 36 cm x D 37 cm H 25.1" x W 14.1" x D 14.5" Weight: 5.42 kg (11.9 lbs) Power: 2200W (1600W for US/CA Units) NOTE: The Boiler is designed primarily for small to medium-sized distilling setups that do not have heavy, off-center attachments. When used with the Still Spirits Boiler 25 L lid or Alembic Dome, it is reasonably flexible and is sturdy enough to fit components within the following specifications: A total column & condenser height up to 1.1 m (3.6 ft) from the boiler lid or dome. A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg lbs) off-center weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6") to the main column. Included in Box Create+ Boiler 25 L Create+ Boiler Lid 2" Tri-clamp to DN40 Threaded Adapter (includes: Silicon gasket and DN40 Nut)  

Read more less

Use this lid along with the 35L BrewZilla or DigiBoil and a copper still top (DS120 or DS130) to make your own easy-to-use distillery. The lid gasket has two distinct sides, one that is rounded and one that is completely flat. When installing the gasket the flat side should be facing up. Use one hand to stretch the gasket around the lid and the other to push the gasket into the channel. This lid has a 1.85" (47mm) hole for the still top. Lid gasket included. Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. Made from 304 stainless steel Measures 16.25" in diameter KegLand Part Number: KL10962

Read more less

Hoffman Clamps, or screw compressor clamps, are used to control the flow in flexible tubing. The clamp has a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. This can be particularly useful when regulating the flow of sparge water, collecting sweet wort from your mash tun, or liquid management applications of a still. Max Tubing OD: 30mm / 1.18" KegLand Part Numbers: KL37891

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.     Maximize the purity of your distillate with high density spiral prismatic packing Prismatic spiral shape designed to maximize surface area Large spiral prismatic packing recommended for 4" diameter or larger columns  Take your distillation to the next level with super high density spiral prismatic packing. The packing maximizes the purity of the collected distillate from your reflux still, ensuring the best possible product is collected. The prismatic spiral shape is designed to maximize its surface area helping to separate out fractions in your reflux, resulting in a highly pure and neutral end product. It is not recommended for use with pot stills when producing flavored spirits. Large spiral prismatic packing is recommended for 4" diameter or larger columns. Standard size packing is recommended for smaller columns home-sized columns. Note: We recommend soaking and washing the SPP before its first use with a 50:50 mix of vinegar or citric acid and warm to hot water to remove all manufacturing oils. Sizing: The SPP is approximately 3.58mm x 5.81mm. KegLand Part Number: KL32704

Read more less

Copper bubble plate column produces higher proof distillate in a single run Borosilicate glass section can be removed to use the column as a pot still for gin, whiskey, rum, and other flavored spirits Modular, tri-clamp design for easy modification and break down for cleaning Capable of producing up to 96% ABV distillate This professional-level distillation column features a modular borosilicate glass body that allows you to watch the progress of your distilling run. It features a 4" tri-clamp connection point which can be attached to the heavy-duty Pro Sight Glass Distillation Lid. Perfectly suited to making up to 96% ABV distillate with 3000w to 3500w of power, and therefore we recommend pairing this column with the 65L BrewZilla or DigiBoil to complete the still. The modular design allows you to remove the borosilicate glass column and run it as a pot still for gins, whiskeys, grappa, brandy, and rums. This column is recommended for intermediate to advanced hobbyist distillers entering the commercial sector who want to a visual indicator of how the still is performing. New distillers are best suited to learn the basics with the AlcoEngine Reflux and AlcoEngine Pot Still range before venturing up to different types of distillation. This distillation kit is Cooling Management still, whereas the AlcoEngines are Liquid Management stills that restrict the flow of distillate, forcing a desired reflux ratio. With this design you are controlling the input of water to the RC component on the column to knock down vapors to fill the bubbler plates, taking on a small portion of the lightest vapors first and condensing them back into liquid as your final distillate. How The Bubble Plate Column Works: Vapor will come into contact with the plates and caps inside the column, causing the vapor to condense back into a liquid. This will happen at the very top of the still where the RC cooler will knock that vapor back into a liquid, causing a reflux action. As the liquid then falls down from bubbler cap to bubbler cap, the liquid that falls is eventually forced back up through the plates again. This process of being forced to run through the caps and plates multiple times creates an end product that has essentially been distilled multiple times in a single run, meaning you can get higher proof alcohol when compared to an empty column. The bubble plates perform a similar function as the copper packing in a hybrid column, but does so more efficiently. When running a bubble plate column, the first run will start in the range of 72.5%-85%. Depending on the quality of the wash, you can reach up to 95%-96% ABV, the highest-grade ethanol you can distill. Please note: There is no instruction manual. This is deemed a commercial unit for those with a license to produce alcohol. We take no responsibility for your failure to comply with your state/local legislation. Includes: (1) 4" Tri-Clamp Adapted 23.6" (600mm) Tall Borosilicate Glass Column with Threaded Tensions Rods (5) Modular Copper Bubbler Plates with Silicone Seals (1) 4" RC / Dephlegmator with 1/2" BSP Male Threads (1) 4" to 2" Tri-Clamp Reducer with 1/2" BSP Thermowell (1) 1/2" Analog Temperature Dial (1) 2" 180° Elongated Elbow (1) 2" Tri-Clamp 23.6" (600mm) Shotgun Condenser with 1/2" BSP Male Threads (1) 2" x 1.5" Tri-Clamp Reducer Not Pictured: (1) 1.5" Tri-Clover x 1/2" Female Thread Not Pictured: (1) 1/2" Male Thread x 13mm Barb (Suitable for Heavy Duty Silicone Hose) KegLand Part Number: KL25942  

Read more less