Distilling Equipment & Accessories

Use this lid along with the 35L BrewZilla or DigiBoil and a copper still top (DS120 or DS130) to make your own easy-to-use distillery. This lid has a 1.85" (47mm) hole for the still top. Lid gasket included. Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. Made from 304 stainless steel Measures 12.25" in diameter. Kegland Part number: KL03483

Read more less

Replacement 6mm thick gasket for the 35L Distillation Lid. Note: This 6mm gasket offers an improved fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them. KegLand Part Number: KL03490

Read more less

The DigiBoil electric kettle can serve a surprisingly wide range of functions. It's perfect for 5-gallon extract batches, preheating strike or sparge water, and with the addition of a still top lid and condenser, it can be used for home distilling. With the Mash Upgrade Kit, you can easily use the DigiBoil as an electric mash tun. The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. This model runs off 110V power and has dual heating elements (1900w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2"). Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 220V / 15A power NEMA 6-30 plug (5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130 & DS120)* External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed *Distilling: using the DigiBoil with a distilling condenser requires the Distillation Lid. Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). KegLand Part Number: KL07252

Read more less

Replacement lock nut for AlcoEngine Copper Pot Still and Copper Reflux Still.

Read more less

This kit is for connecting your garden hose to the Copper Pot Still and Copper Reflux Still condensers (DS131 / DS132). The vinyl tubing is connected to the coolant inlet and outlet and secured with hose clamps. The coolant "IN" line comes with an adapter for direct connection to your garden hose. Includes: 2 x 10 ft. lengths of 1/2" ID vinyl tubing 1 x Female garden hose by 1/2" barb adapter 3 x Hose clamp  

Read more less

This flow management (FM) reflux still has been designed to create high percentage pure neutral spirit. The FM technology used in this design makes this process robust and easy to use. No need to worry about water pressures and fine tuning of water flow speeds. The FM design gives you direct control of the reflux ratio and therefore the purity of your end product. It’s never been so easy to enjoy the craft of distillation. Combine with a distillation lid to use a BrewZilla or DigiBoil as the base for this Alcoengine brand still top. Comes with 13 mm (0.51") barb connections for the water inlet and outlet. Kegland Part number: KL16162    

Read more less

This professional still features a 4" column and sight glasses at each plate to allow you to watch the progress of your distilling run. The modular construction features 4" & 2" tri-clamp parts throughout so you can add accessories or modify the still as you see fit. The heavy-duty kettle comes with analog thermometer, multiple element ports, a shoulder port for pumping in wash, and a bottom dump valve for easy cleaning. Features: Heavy Duty Kettle – built to last and will survive for generations Shotgun Style Condensers for easy cleaning and efficient cooling Modular Construction – tri-clamp connected parts in the column and condenser allow you to remove or add parts as you see fit. Remove the plate section and dephlegmater (reflux condenser) for fast stripping runs or pot-style spirit distillation 4 Copper Plates provide plenty of surface area to capture (trap or bind) sulfur so that it doesn't make it into your finished spirit Sight Glasses at each plate allow you to double check that you are keeping every plate loaded for optimal reflux Solid Column – fewer leak points. No finicky plate gaskets which are prone to twisting and leaking Large Bubble Cap – each plate has one large bubble cap which makes it easy to clean and maintain Parrot Dump Valve allows you to drain the Parrot periodically during the run to make sure you are getting an accurate reading with your hydrometer (3) 2" Tri-Clamp Element Ports – use a combination of heating elements for more control 2" T.C. Dump port with Butterfly Valve 1.5" Shoulder port with Butterfly Valve 1/2" FPT cooling source connections  

Read more less

Replacement gasket for AlcoEngine Copper Pot Still and Copper Reflux Still.

Read more less

This complete still kit comes with the 65L DigiBoil Electric Kettle and the Copper Pot Still Condenser. 65L DigiBoil (220V) Copper Pot Still w/ Barb Connections Distillation Lid w/ Gasket   Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. MoreBeer! is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). NOTE: Due to the size of this item, it is not eligible for international shipping.  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The BrewBuilt™ Boil Vigor Controller allows you to control the current of 208-240V heating elements up to 30 amps. Perfect for dialing down a boil or adjusting the heat input to a still wash pot. The controller works by adjusting the percentage of power delivered to the heating element. The power is increased in a linear fashion from 0 to 100% as you adjust the dial from 1 to 11. Features industrial-style power switch, dial knob, and digital display mounted on a splash resistant stainless steel enclosure. Precut mounting holes for attaching the controller to a brew stand or mounting on the wall. L6-30 connections with 4 ft. cords on either end. The controller uses an oversized SSR with a very large fan cooled heatsink for better reliability. It includes a contactor to fully shut off both legs when you throw the power switch, which makes the free end of the cord safer when the element is not plugged in. The display gives you a reading of the actual current being consumed by your element in Amps. Max Current Rating of 240V / 30 Amps. If you'd prefer not to mount the controller to your wall, consider the stainless steel Controller Stand.     **Caution: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.**  

Read more less

Eliminate oxidation in your bottling process with the XF260HP volume-based filling system Made specifically for high proof spirits—featuring components with better resistance to high concentrations of ethanol Liquid is pulled from your barrel or storage tank by the built-in self-priming pump Filling volume is programmed and stops automatically Optional gas flush system Made to order in the United States Eliminate oxidation in your bottling process by using the XpressFill volume-based filling system! The XF260HP two bottle filler is now available specifically for High Proof Spirits. Susceptible components have been replaced with material more resistant to higher concentrations of ethanol.  The XF260HP can easily accommodate very small to very large bottles with its adjustable shelf, allowing great flexibility.  Easy to use, compact in design, precise volume filling, high quality components, hand-crafted in the USA. Gravity-based systems usually involve spirits being transferred to a holding tank, and unless your bottles and holding tank are pre-flushed with inert gas, some degree of oxidation is inevitable. Xpress Fill bottling systems have a closed pathway with a self-priming pump. They also have as an optional built-in sparging (pre-flushing) system that uses Nitrogen or Argon to pre-flush your bottles. To use, place two bottles under the filling spouts, push the gas button (optional at additional cost) to flush the bottles with inert gas. Then hit the Fill button which pulls the spirit from your barrel or stainless storage tank, distributes 750ml of spirit to each bottle, and shuts off automatically when done. It is truly that simple. Each fill cycle lasts 20 seconds. When using 750ml bottles you can expect to fill about 250 bottles per hour. There is also a manual mode allowing you to top up bottles or fill odd size bottles. The two spout filler features a 3/8" inlet. Features: Made to order in the USA 2 Spout fills approximately 250 bottles per hour Bottle shelf is adjustable to accommodate a wide range of bottles Optional Gas Flush System & Filler to automatically gas-purge bottles prior to filling Weight: 23 lbs Dimensions: 11.25" W x 17" H x 15.5" D Warning: XpressFill bottle fillers are NOT certified as explosion proof, should be used in a well-ventilated area, and not for use with solvents. It should be noted that 70% alcohol is 140 proof and has a flash point of 70°F, making the product volatile, as well as flammable

Read more less

PLEASE NOTE: The supplier of this product has temporarily halted shipments to addresses within the state of California. If you are a CA resident, please note your order will not be fulfilled and will ultimately be canceled. We hope to have this issue resolved with the supplier as soon as possible.   Replacement Lid for the T500 Boiler. Necessary for attaching Reflux Condensors to the Grainfather. Does not come with lid gasket (DS202). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsiblity to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA). 

Read more less

This coupling is used to attach a still top to the Turbo Boiler (BE447). The still top must be welded into the coupling or attached via a food grade silicone adhesive. Made from 304 stainless steel, this coupling has an internal diameter of 55mm and will fit a still top of 55 mm or less.   Kegland Part Number: KL03445

Read more less

Construct your own still and experience the ultimate in home brewing!    An entertaining and educational book on the history of stills, with basic instructions on how you can build your own! The Lore of Still Building gives you instructions on how to build a small still for the production of alcoholic beverages, or a larger version for the production of fuel energy. The author effectively communicates technical information into layman's terms. With just a few short hours of reading, you will be able to build your own efficient and economical still.

Read more less