Upgrade Your Cellar with Premium Enoitalia Equipment

Motorized unit crushes grapes and separates stems in one pass Stainless steel construction throughout Screw Feed provides fast, continual hands-free operation Self-adjusting rubber rollers are soft on grape stems to reduce tannin extraction 3,000 lbs per hour production capacity Made in Italy by EnoItalia Our #1 selling crusher/destemmer style, this motorized unit with a stainless screw feed also features a stainless steel Body and Bin making it a completely stainless steel model. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. How These Work: Grapes are loaded into the top bin where the powered screw feed continually pushes grapes towards the rollers. Grapes are gently crushed by the rubber rollers and then fall into the destemming chamber. The destemming chamber features a removable basket with a bunch of circular holes in it and rotating destemming shaft. Grapes fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket. Rubber Rollers This model features soft rubber rollers which are softer on stems possibly reducing rough tannins in your wine. The rollers are spring loaded and self adjusting to protect against damage, such as the accidental passing of a small stone. Output Production Powered by a 1hp motor that provides an hourly production of approximately of up to 3000 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many grapes at one time and the motor will pause and actually slow down production. Cleaning Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions. WE223S Features: 1) 304-Type Stainless Steel Bin, Body, Screw Feed, and basket 2) A Screw Feed in the Receiving Bin for continual, faster, hands-free operation 3) Spring Loaded, Self Adjusting Rubber Rollers 4) Solid Construction 5) A powerful 110V 1HP motor which provides an hourly production of approximately 3000 lbs. 6) Replacement parts are available 7) Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47" long x 19.6" wide x 25" high. Weight: 118 pounds (54KG.) Figure 158 lbs for shipping weight with pallet.

Read more less

Motorized unit separates stems from elderberries Stainless steel construction throughout Screw Feed provides fast, continual hands-free operation 2,500 lbs per hour production capacity Made in Italy by EnoItalia Our #1 selling destemmer. This motorized unit with a stainless screw feed also features a stainless steel Body and Bin making it a completely stainless steel model. This model has been adapted specifically for processing elderberries, which have a smaller diameter than grapes. The destemmer can be purchased by itself or alongside the Stainless Stand & Chute. This stainless steel support stand features a closed bottom hopper that keeps your product contained while dropping into a receiving vessel or pump to move your fruit for further processing. Also compatible with the standard EnoItalia Stainless Stand & Chute if you prefer a three-sided, "open" bottom hopper. How These Work: Elderberries are loaded into the top bin where the powered screw feed continually pushes them towards the destemming chamber. The destemming chamber features a removable basket and rotating destemming shaft. Berries fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket. Output Production Powered by a 1hp motor that provides an hourly production of approximately of up to 2500 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many elderberries at one time and the motor will pause and actually slow down production. Cleaning Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions. Features: 304-Type Stainless Steel Bin, Body, Screw Feed, and basket A Screw Feed in the Receiving Bin for continual, faster, hands-free operation Solid Construction A powerful 110V 1HP motor which provides an hourly production of approximately 2500 lbs. Replacement parts are available Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47.6" long x 23.6" wide x 27.1" high. Weight: 110 pounds (50KG.) Figure 150 lbs for shipping weight with pallet.

Read more less

Hand operated unit crushes grapes and separates stems in one pass Stainless steel basket is removable for easy cleaning Fiber reinforced nylon fly-wheel Aluminum rollers Made in Italy by EnoItalia This hand-cranked Crusher/Destemmer is perfect for the home winemaker processing small batches or is working in conjunction with friends who don't mind a little manual work! As the unit is cranked, the grapes are pulled by the agitator into the rollers where first the grapes are crushed. Next, they fall into the stainless basket where a rotating shaft with paddles separates stems from grapes. The crushed and de-stemmed grapes then fall through the basket while simultaneously the stems are pushed out the end and into a refuse can. All of our units feature removable easy-to-clean stainless baskets (grates) where the grapes fall through after having been crushed. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. Features: Enamel coated body, bin, and agitator 304-Type Stainless Steel Basket (can be removed for easy cleaning) Fiber reinforced nylon fly-wheel Aluminum Rollers Output is speed is as fast as you can crank Replacement parts available Color of enamel may vary Product Dimensions 48"Lx27"Hx20"W How to Assemble the Optional Stand & Chute:

Read more less

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Hand operated unit crushes grapes and separates stems in one pass Stainless steel basket is removable for easy cleaning Fiber reinforced nylon fly-wheel Nylon rollers Made in Italy by EnoItalia Same unit as our standard Manual Destemmer but with the added longevity of a stainless steel receiving bin. This hand-cranked Crusher/Destemmer is perfect for the home winemaker processing small batches or is working in conjunction with friends who don't mind a little manual work! As the unit is cranked, the grapes are pulled by the agitator into the sturdy nylon rollers where first the grapes are crushed. Next, they fall into the stainless basket where a rotating shaft with paddles separates stems from grapes. The crushed and de-stemmed grapes then fall through the basket while simultaneously the stems are pushed out the end and into a refuse can. All of our units feature removable easy-to-clean stainless grates where the grapes fall through after having been crushed. Imported from Italy from Enoitalia. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. Features: Stainless Steel Receiving bin Fiber reinforced nylon fly-wheel Stainless Steel Grate that slides out for easy cleaning Sturdy Nylon Rollers Output is speed is as fast as you can crank! Replacement parts are available Product Dimensions 48"Lx27"Hx20"W How to Assemble the Optional Stand & Chute:

Read more less

Motorized unit crushes grapes and separates stems in one pass All parts that come into contact with the grapes are made from stainless steel Screw Feed provides fast, continual hands-free operation Self-adjusting rubber rollers are soft on grape stems to reduce tannin extraction 3,000 lbs per hour production capacity Made in Italy by EnoItalia A great value in our motorized Crusher Destemmer line as the parts that are in direct contact with the grapes are stainless while the main body and motor/gear shroud are made from enamel coated steel. Performance is exactly the same as our WE223S Model. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. How These Work: Grapes are loaded into the top bin where the powered screw feed continually pushes grapes towards the rollers. Grapes are gently crushed by the rubber rollers and then fall into the destemming chamber. The destemming chamber features a removable basket with a bunch of circular holes in it and rotating destemming shaft. Grapes fall through the holes into your bucket. Stems get rotated through the basket by the destemming shaft until they exit at the end of the machine where they fall onto the ground or an awaiting bucket. Rubber Rollers This model features soft rubber rollers which are softer on stems possibly reducing rough tannins in your wine. The rollers are spring loaded and self adjusting to protect against damage, such as the accidental passing of a small stone. Output Production Powered by a 1hp motor that provides an hourly production of approximately of up to 3,000 lbs. Note that these machines must be fed with consistency to reach maximum throughput. Overload the machine with too many grapes at one time and the motor will pause and actually slow down production. Cleaning Remove two quick bolts and the safety cover slides off and the internal stainless destemming grate slides out for easy cleaning. The hose out the rest of the unit. Comes with directions. WE223PS Features: 1) 304-Type Stainless Steel Receiving Bin, Screw Feed, and Destemming Basket 2) A Screw Feed drive receiving bin for continual, faster, hands-free operation 3) Adjustabe Rubber Rollers (adjustment on all small machines, regardless of make, is limited to 5mm because of the way the gears mesh.) 4) Solid Construction 5) A powerful 110V 1HP motor which provides an hourly production of approximately 3000 lbs. 6) Replacement parts are available 7) Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47" long x 19.6" wide x 25" high. Weight: 118 pounds (54KG.) Figure 158 lbs for shipping weight with pallet.

Read more less

Adapt your existing EnoItalia gravity fed wine bottle filler for use with high viscosity liquids Larger 17 mm diameter fill nozzles are designed for better flow with liquids like olive oil Compatible with EnoItalia Benchtop, Deluxe Benchtop, and Trolley Style wine bottle fillers The Olive Oil Filling Head can be swapped out for the standard filling head on EnoItalia gravity wine bottle fillers. It features a 17 mm Ø spout instead of the standard 15 mm Ø in order to handle more viscous liquids like olive oil. Compatible With: EnoItalia Benchtop Bottle Fillers WE253, WE257 EnoItalia Deluxe Benchtop Bottle Fillers WE254, WE258 EnoItalia Trolley Style Bottle Fillers WE643, WE670

Read more less

Pos. 9 Nozzle Tip for WE680 Vacuum Wine Bottle Filler. See attached instruction manual for diagrams.

Read more less

All stainless grape destemmer with built-in must pump Screw Feed provides fast, continual hands-free operation Rubber tipped destemming bar for softer processing 4,000 - 4,500 lbs/per hour processing capacity Removable stainless basket for easy cleaning Made in Italy by EnoItalia For the serious home winemaker or a very small winery, this machine represents an amazing value. It is gentle, easy to load, and pumps the grapes into your awaiting fermenter, eliminating the need for a separate must pump. Why No Crushing Rollers? Because you don't need them. Here is how it works. You put fruit in the top bin and the screw feed moves the fruit to the left where it drops down into the destemming chamber. The fruit is destemmed and grapes drop down through the grate to the next level. Stems are ejected out the end of the destemming chamber and onto a tarp on the ground. After the fruit drops through the destemming chamber it falls into a bin at the bottom of the machine that has a screw feed. The screw feed pushes the grapes to the right where they are pushed into a circular chamber. In the circular chamber, a paddle wheel, pushes grapes back out the exit tube, through a 3" hose, you attach, and into the awaiting fermenters. Why this machine is so popular in Italy Because they know you don't need rollers on this type of machine. The action of the two screws, the destemming chamber and the paddle wheel crack the berries. More on the Built-in Must Pump The built in paddle-wheel style must pump can push fruit an average of 12' high with a 10' horizontal run OR up to 4' high with a 40' horizontal run. These are estimates only: actual results will vary on factors such as the total load on the machine and the viscosity of the must in the transfer tube. It can only be used at processing time and cannot be used later in the winemaking process. A Great Value! We recommend this machine for small wineries or larger home producers who do not wish to make the considerable jump to truly commercial quality equipment. You can make very, very good wine with this machine and we often tell small winery owners that the money saved can be used more effectively in other ways to make great wine.  Summary of Features: 1) Stainless Body, Bin, Agitator, and Screw Feed 2) Removable stainless basket for easy cleaning (Destemming basket holes are 1.0225" wide) 3) A Screw Feed for continual, faster, hands-free operation 4) Rubber tipped destemming bar for softer processing 5) Output of 4000 - 4,500 lbs/per hour 6) Paddle wheel style Must pump built in with 3" TC Outlet 7) A powerful Single Phase 220V 2 HP motor (12.1 amp draw) with starting capacitor 8) High-quality units made by Enoitalia of Italy 9) Replacement parts are available 10) Two casters allow for easy wheel-barrow type movement 11) Emergency stop button 12) Length 46.5" (118 cm), Width 27" (68 cm), Height 35.4" (90 cm), weight 207 lb (94 kg) 13) Unit comes with bare cord wire. Wire on the appropriate 220v plug for your electrical connection.   Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it.  The 2 wheeled cart can make it into tight places in the winery, and scoots out of the way when not needed.  With the included SS Bypass, you can reduce flow rates up to 25%.  SS head and cart mean easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Although the Euro 30 is self-priming, the pump should never be run dry. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery SS Bypass for reducing flow SS head w/ flexible impeller Light assembly required - pump is separate from cart in box 220v bare cord  - You will need to wire on the appropriate 220v plug 

Read more less

Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%.  SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Self-priming Recommended temperature range: 40 - 150°F (5 - 65°C) SS Bypass for reducing flow SS head w/ flexible impeller 220v bare cord  - You will need to wire on the appropriate 220v plug  Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.    

Read more less

Flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Pre-wired with 110V plug Made in Italy by EnoItalia This version of the Italian-made Euro 20 features a pre-wired 110V plug. Unlike the 220V model, this pump is ready for use and does not require a plug to be wired to a bare cord. The Euro 20 is a great pump for smaller production. Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice. We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation. This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 110V single phase Pre-Wired Plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller

Read more less

After using the Italian crusher/destemmer units for many years ourselves, we designed and manufactured a special accessory stand that is just tall enough to allow grapes to drop directly into your fermenter or transfer container. Many customers opt to use our 32 Gallon food-grade containers (which we sell as WE509). A regular garbage can can be placed at the end of the unit to collect stems. By using the stand you eliminate the need to move the must and stems from container-to-container, thus saving time and energy. This model fits our WE220 and WE223 series of EnoItalia Crusher/Destemmers. Does not fit models from other manufacturers. Please Note: This stand comes broken down, and will require assembly. Estimated Overall dimensions: Footprint: 32 1/4" long x 22" wide Height: 40" high. Top Tray Inside dimensions 32" long x 14" wide

Read more less

Closed stainless steel support stand for the EnoItalia Crusher Destemmer for Elderberries. The bottom hopper keeps your product contained while dropping into a receiving vessel or pump to move your fruit for further processing. Please Note: This stand comes broken down, and will require assembly.

Read more less

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve. As the wine level drops in the reservoir the pump is turned on to refill. Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D 110V Please note: The integrated pump is hardwired into the panel. It cannot be disconnected and used separately as it appears in the photo.

Read more less

Ideal for pushing wine through plate and frame, lenticular, and/or cartridge filters Ideal for moving must and wine Dry stop protection Wireless remote Optional motorized receiving hopper for placement under a destemmer (shown in photo) The ultimate one winery pump for all applications The Lobe Rotor pump from EnoItalia is the ultimate winery pump, representing the best of all worlds.  Lobe Rotor pumps can also be used for filtering applications where positive pressure is necessary to pump wine through a sheet or membrane.  Lobe Rotor pumps also have some of the lowest shear values which protects skins and seeds from being macerated during the pumping process.  The stainless lobe rotos are coated in rubber to ensure that seeds to do not get marcerated in the pumping process.   Enoitalia also makes an optional receiving hopper that can be used under a destemmer crusher to collect whole destemmed, or crushed grapes. Max capacity 50,700 lbs with destemmed grape, and 44,000 lbs with fermented grape. Benefits: The only pump you will need in your winery that allows you to use if for all applications. The highest quality, lowest shear value keeps skins and seeds intact to reduce unwanted tannin.  Positive pressure allows for use in filtering applications Optional receiving hopper availlable Features: PLC interface Speed control   Timed and programmable volume pumping Dry stop protection - pump turns off to protect pump when dry Direction reversal Pressure switch Connection for a motorized collection buffer Wireless remote control Easy to use PLC programmable controls Low profile and easily moved 3" tri-clamp inlet/outlet 220v 60hz 3 Phase 7.5 kW

Read more less

Simple, hand operated crusher for home cider makers 24" x 17" stainless steel hopper Fruit is cut up by knife blades before passing through the aluminum rollers Compact design can sit on top of your fermenter or press Made in Italy by EnoItalia Make your own apple cider with this easy-to-use manual crusher! Put the apples (or pears) into the 24" x 17" hopper and crank away. The knife blades cut the apples and the aluminum rollers grab the apples and pull them in and smash them up  yielding a pulp that can then be pressed. Hand operated, place over one of our white fermenters or directly on top of your press.

Read more less

Combines all the benefits and advantages of our best-selling rubber impeller Enoitalia Euro Pumps with inline volume measurement.  This is a pump with a brain! Enter in the volume of wine you would like to pump and the EuroFill turns off when that volume has been pumped. With a built-in flow meter, PLC (programmable logic controller) and a touch screen this pump will reduce human error and make your cellar life a lot easier. Filling barrels, blending exact volumes of wine, and dosing larger tanks with specialized ingredients are a few of the most useful applications. You can also control pumping by time which can be useful for pump overs and cleaning solutions.   Includes a wireless remote control.  Made by Enoitala, a pump specialist, in Tuscany Italy.  Sold and supported in the USA by MoreWine!.  Unique Applications: Know the volume pump during any transfer Program an exact volume you want pumped Easily create perfect blends Fill barrels by volume (and then top off) Can be used for all general pumping application Features: Rubber impeller pump with electronic speed control Programmable Logic Controller (PLC) for manual or automatic operation Endress induction flow meter Programmable dosing, counting, and timer Remote control 7" Touchscreen Stainless steel control panel and trolley Dry run protection Pressure switch Specifications: Capacity: 0-6,340 GPH (0-24,000 L/h) Max Pressure: 33 PSI (2.3 BAR) 3" Tri-Clamp Inlet/Outlet 220V, Single Phase 4 kW Please note: the unit will arrive bare without a power cord, plug, or controls to power the motor on or off. You will need an electrician to wire the appropriate power cord and controls to the motor.

Read more less

Independently controlled feeding hopper and destemming chamber Destemming chamber/basket with anti-tear design is gentle on grapes to reduce skin abrasion Unique chamber-mounted wiper cleanly moves destemmed grapes to the exit 6 tons per hour processing capacity Integrated washing system for quick cleanings between varietals or after an extended break Made in Italy by EnoItalia The Jolly 60 Reverse Destemmer from our partners at EnoItalia features three adjustable speed motors to allow for independent control of the feeding hopper, the destemming process, and the roller group. Along with adjustability in the destemming bar and then on gap setting in the sorting process you can really dial in the machine for your application. Jolly 60 Reverse EnoItalia's newest destemmer, the Jolly 60 Reverse is the ideal processing unit for smaller wineries looking for top-quality processing at an affordable price. The loading hopper features a mechanical speed variable motor so you can control the flow of grape bunches into the destemming chamber. The destemming bar and basket are separately controlled by a variable frequency drive that allows you to turn a dial to set the right speed. Separate control of these processes allows you to find the balance between speed and quality and helps the machine from being overloaded at either stage. The destemming chamber is made with a gentle anti-tear design to reduce grape skin abrasion. The holes in the basket are deep punched through thicker stainless steel, from the inside out, and then bead blasted to remove any sharp edges. The destemming bar features fingers with adjustable rubber tips to ensure a gentle touch on your grapes. The destemming chamber and the destemming bar move in opposite or "reverse" direction for best performance. The receiving hopper features perforated drainage holes to allow juice, sometimes found in the bottom of picking bins, to exit before entering the destemming chamber. There is a 1.5" hose barb for connecting tubing that runs into a collection bucket. That juice is most often discarded. Optional Accessories: The Jolly Reverse can be custom ordered with the below accessories. Contact our Sales Team today to inquire. Collection Tank with Central Screw & Motor - WE540 Larger Hopper for Macrobin use - WE541 Jolly 60 Reverse: 304 Stainless Steel Construction Process up to 6 tons per hour 220V 3 Phase 3HP Motor Variable Speed with Frequency Drive Rubber Tipped Destemming bars Centrifugal Destmming chamber rotates in reverse direction of destemming bar Unique chamber-mounted wiper blade cleanly moves grapes to discharge port Destemming chamber features 24mm holes Casters, 2 of which lock Easily remove destemming chamber/basket and shaft for easy cleaning Unit comes with bare cord wire. Wire on the appropriate 220V plug for your electrical connection Manufactured by EnoItalia Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

Independently controlled feeding hopper and destemming chamber Destemming chamber/basket with anti-tear design is gentle on grapes to reduce skin abrasion Unique chamber-mounted wiper cleanly moves destemmed grapes to the exit 13 tons per hour processing capacity Integrated washing system for quick cleanings between varietals or after an extended break Made in Italy by EnoItalia The Jolly 100 Reverse Destemmer from our partners at EnoItalia features three adjustable speed motors to allow for independent control of the feeding hopper, the destemming process, and the roller group. Along with adjustability in the destemming bar and then on gap setting in the sorting process you can really dial in the machine for your application. Jolly 100 Reverse EnoItalia's newest destemmer, the Jolly 100 Reverse is the ideal processing unit for smaller wineries looking for top-quality processing at an affordable price. The loading hopper features a mechanical speed variable motor so you can control the flow of grape bunches into the destemming chamber. The destemming bar and basket are separately controlled by a variable frequency drive that allows you to turn a dial to set the right speed. Separate control of these processes allows you to find the balance between speed and quality and helps the machine from being overloaded at either stage. The destemming chamber is made with a gentle anti-tear design to reduce grape skin abrasion. The holes in the basket are deep punched through thicker stainless steel, from the inside out, and then bead blasted to remove any sharp edges. The destemming bar features fingers with adjustable rubber tips to ensure a gentle touch on your grapes. The destemming chamber and the destemming bar move in opposite or "reverse" direction for best performance. The receiving hopper features perforated drainage holes to allow juice, sometimes found in the bottom of picking bins, to exit before entering the destemming chamber. There is a 1.5" hose barb for connecting tubing that runs into a collection bucket. That juice is most often discarded. Optional Accessories: The Jolly Reverse can be custom ordered with the below accessories. Contact our Sales Team today to inquire. Collection Tank with Central Screw & Motor - WE540 Larger Hopper for Macrobin use - WE541 Jolly 100 Reverse: 304 Stainless Steel Construction Process up to 13 tons per hour 220V 3 Phase 4HP Motor Variable Speed with Frequency Drive Rubber Tipped Destemming bars Centrifugal Destmming chamber rotates in reverse direction of destemming bar Unique chamber-mounted wiper blade cleanly moves grapes to discharge port Destemming chamber features 24mm holes Casters, 2 of which lock Easily remove destemming chamber/basket and shaft for easy cleaning Unit comes with bare cord wire. Wire on the appropriate 220V plug for your electrical connection Manufactured by EnoItalia Please Note: This item may come with a bare cord or with a European style plug. You will need a professional electrician to wire the pump with the appropriate plug.

Read more less

Made to pair with the EnoItalia Lobe Rotor Pump, the optional receiving hopper can be used under a destemmer crusher to collect whole destemmed, or crushed grapes. Max capacity 50,700 lbs with destemmed grape, and 44,000 lbs with fermented grape. 220V 3 Phase 0.75 kW

Read more less

Combines all the benefits and advantages of our best-selling rubber impeller Enoitalia Euro Pumps with inline volume measurement.  This is a pump with a brain! Enter in the volume of wine you would like to pump and the EuroFill turns off when that volume has been pumped. With a built-in flow meter, PLC (programmable logic controller) and a touch screen this pump will reduce human error and make your cellar life a lot easier. Filling barrels, blending exact volumes of wine, and dosing larger tanks with specialized ingredients are a few of the most useful applications. You can also control pumping by time which can be useful for pump overs and cleaning solutions.   Includes a wireless remote control.  Made by Enoitala, a pump specialist, in Tuscany Italy.  Sold and supported in the USA by MoreWine!.  Unique Applications: Know the volume pump during any transfer Program an exact volume you want pumped Easily create perfect blends Fill barrels by volume (and then top off) Can be used for all general pumping application Features: Rubber impeller pump with electronic speed control Programmable Logic Controller (PLC) for manual or automatic operation Endress induction flow meter Programmable dosing, counting, and timer Remote control 7" Touchscreen Stainless steel control panel and trolley Dry run protection Pressure switch Specifications: Capacity: 0-1,373 GPH (0-5,200 L/h) Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clamp Inlet/Outlet 220V, Single Phase 2.2 kW Please note: the unit will arrive bare without a power cord, plug, or controls to power the motor on or off. You will need an electrician to wire the appropriate power cord and controls to the motor.

Read more less

Position under a wine press to separate solid material before pumping to your fermentation tank Remove seeds and oxygenate wine during a pump-over process Filter out seeds while moving wine from the fermentation tank to a holding tank A buffer tank or svinatore is used for several applications. During a press, during a pump-over and sometimes immediately following primary fermentation. The EnoItalia Buffer Tank is made entirely of 304 stainless steel and features a removable filter bed and 1.5" tri-clamp ferrule outlet. Mounted on caster wheels with a push cart handle for easy mobility from tank to tank around your winery. This unit is used under a press such as our 300L or 450L presses and also under red wine fermentation tanks in a pump-over process where the screen removes seeds and provides oxygenation during the initial parts of fermentation. Features: Tank and rolling cart frame made from stainless steel Removable filter made from stainless steel 1.5" T.C. outlet connection for pump Locking brake on all 4 casters 34 Gallon (130L) capacity Dimensions: 30.8" L x 25.75" W x 30.8" H (33.9" with wheels)

Read more less

Process apples, pears, and other non-pitted fruit Stainless steel construction throughout Easily disassembles for cleaning after use Made in Italy by EnoItalia A motorized shredder for use with apples, pears or any other fruit which needs processing before it can be pressed for its juice. Not for use with peaches, cherries or other pitted fruits. To use, fruit is fed into the hopper at the top of the machine, where it falls on to spinner cutter blades which shred the fruit. The mash is then pushed out of the machine and into your waiting bucket where it can then be transferred to the press. Extremely simple to operate, and safe since the cutting blades are buried deep in the machine during operation. Sturdy, all stainless steel construction means that you know this machine will last you for years and years. Simple disassembly for cleaning. Runs on standard 110V power with a 1.5HP Motor. We tested this shredder ourselves and found that because it is only 110V, you have to feed the fruit in slowly and consistently. If you have access to 220V power, we recommend our WE208 crusher, which can hold more fruit at once and crush more fruit per hour.

Read more less

Gently mix yeast, sulphite, and additives into your wine with this variable speed mixer. The stainless cart allows you to move the mixer up and down to the height of your tank fitting. Also adjust the angle of the mixer to accomodate inclined, reinforced mixing ports, like on our Speidel Stainless tanks. The included pump is a very unique feature that allows you to pump a slurry out of a bucket, into the mixer and into the tank. This saves time by not having to open the top hatch, reduces possible oxidation, and ensures a better mix.  How to Use Mixing ports enter through full port 2" TC ball valves to allow for an easily installation and disassembly. Position and attach the mixer to your 2" TC ball valve.  Open the valve and slide in the adjustable mixing shaft, lock the shaft in position, and turn on.  Adjust the speed to accomodate your desired level of agitation.  To remove unlock shaft, slide out, turn off TC ball valve, and then disconnect mixer from TC ball valve. For Use in Beer: Wine tank mixers are perfect for mixing hops during dry hopping operations. Their use decreases the time needed to extract hop oils and lowers the amount of hops needed to get the same dry hopping level. This requires a horizontal port with a full port ball vale on the tank. Features: All parts in contact with the liquid are made of stainless steel AISI 304. 0.75 kw power, speed 0-1400 RPM Euro 20 pump included Single phase power supply Rod length 650 mm Width 155 mm propeller Stainless cart

Read more less

The U-200 Screw Elevator built entirely in stainless steel, is a multi-purpose machine that allows the transport of whole grapes inside the destemmer, the pomace to the press, or the evacuation of the stems from the unloading area of ​​the destemmer. The low rotation speeds and included speed variator allow non-aggressive handling of the grapes. A height-adjustable stainless steel trolley is supplied as standard. Loading hopper with side pump connection for liquid recovery. 2HP single-phase motor with CE emergency stop. Features: Stainless screw feed 7.8" Diameter x 118" L Variable Speed with Frequency Drive Loading hopper with connection fitting for liquid Open cover lid for cleaning Winch to adjust the height Capacity: 2-10 tons per hour Hopper Dimensions: 25.5" x 28.3" x 35.4" Loading Height: 18.9" to 27.9" Discharge Height: 63" to 78" 220V Single Phase 2HP Motor CE panel control  

Read more less

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve. As the wine level drops in the reservoir the pump is turned on to refill. Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D Runs on 220V Power, and comes with a bare cord. You will need an electrician to come and wire the appropriate plug.

Read more less

Gently mix yeast, sulphite, and additives into your wine with this variable speed mixer. The stainless cart allows you to move the mixer up and down to the height of your tank fitting. Also adjust the angle of the mixer to accomodate inclined, reinforced mixing ports, like on our Speidel Stainless tanks. How to Use: Mixing ports enter through full port 2" TC ball valves to allow for an easily installation and disassembly. Position and attach the mixer to your 2" TC ball valve.  Open the valve and slide in the adjustable mixing shaft, lock the shaft in position, and turn on.  Adjust the speed to accomodate your desired level of agitation.  To remove unlock shaft, slide out, turn off TC ball valve, and then disconnect mixer from TC ball valve. For Use in Beer: Wine tank mixers are perfect for mixing hops during dry hopping operations. Their use decreases the time needed to extract hop oils and lowers the amount of hops needed to get the same dry hopping level. This requires a horizontal port with a full port ball vale on the tank. Features: All parts in contact with the liquid are made of stainless steel AISI 304. 0.75 kw power, speed 0-1400 RPM Single phase power supply Rod length 650 mm Width 155 mm propeller Stainless cart

Read more less

Wheeled crush pad pump rolls directly under the Jolly 40 or Jolly 60 Crusher Destemmer Stainless steel construction throughout Screw feed moves grapes to the elliptical must pump with 3" tri-clamp outlet Up to 16,000 lbs per hour processing capacity Made in Italy by EnoItalia A 3-Phase Crush Pad Specific must pump that transfers crushed grapes from your Crusher Destemmer to your tank or bin.  Entire pump is on wheels and will slide under the Jolly 40 or Jolly 60 Crusher Destemmer. Grapes would fall into the awaiting stainless hopper. Stainless screw moves grapes into the eliptical, paddle style must pump that then moves them through 3" tubing to final destination.  Considered more gentle than using a rubber impeller must pump. Only available in 3 phase power.  Details: Power: 2.5 HP Three Phase 220 v draws 4.7 amps Capacity:  12,000 to 16,000 pounds per hour Shaft Speed:  47-58RPM Max Pressure: 7.2 PSI (0.5 BAR) Out Let Barb: 3" Tri-Clamp Max Discharge Height:  9 feet Max Discharge Distance: 30 feet Weight: 220 Pounds Pump Body: Stainless Steel Loading Hopper & Screw: Stainless Steel Refillable automatic lubricator Hinged discharge cone can be opened for inspection Single speed pump Please Note:  This unit REQUIRES 220V Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.

Read more less

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features six filling heads and stainless steel construction. Included 4" casters make this unit very easy to move around. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler versus a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir Included 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 180 pounds 71" H x 34" W x 26" D

Read more less

Coming soon! The Euro 30 is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is late summer 2026. Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%.  SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 1.5 HP motor Self-priming Recommended temperature range: 40 - 150°F (5 - 65°C) SS Bypass for reducing flow SS head w/ flexible impeller 110V   

Read more less

Replacement Gasket Set for EnoItalia Vacuum Wine Bottle Filler. Includes: (1) Pos. 10 (1) Pos. 4 (2) Pos. 2

Read more less

Replacement Gasket Pos. 10.

Read more less

Adapt your existing EnoItalia gravity fed wine bottle filler for use with larger bottle Shorter filling heads can accomodate 3 and 5 liter bottles Compatible with EnoItalia Benchtop, Deluxe Benchtop, and Trolley Style wine bottle fillers The Large Format Filling Head can be swapped out for the standard filling head on EnoItalia gravity wine bottle fillers. It's compact design allows large format 3L & 5L bottles to be used with the gravity fillers. Compatible With: EnoItalia Benchtop Bottle Fillers WE253, WE257 EnoItalia Deluxe Benchtop Bottle Fillers WE254, WE258 EnoItalia Trolley Style Bottle Fillers WE643, WE670

Read more less